Havis-Shields C-VS-800-CV Guida alla configurazione

INSTALL INSTRUCTIONS C-VS-800-CV

VEHICLE SPECIFIC CONSOLE &

RADIO/HVAC RELOCATION HOUSING

1997-2008 FORD CROWN VICTORIA

TOOLS REQUIRED:

Ratcheting wrench

Standard/Metric socket set

Screwdriver set

Tin snips (if necessary)

Powered Drill w/ 5/16” drill bit

HARDWARE:

QTY DESCRIPTION PART #

2 #10 x ¾” Phillips sheet metal screws GSM33195

1 Torx Screw Kit C-HK-1

Always!

 Disconnect the vehicles’ battery. Removing seat bolts on

some vehicles may give the vehicles computer a false

reading resulting in warning lights. This requires the

vehicles’ computer to be reset.

 Read all instructions before installing any Havis-Shields

Equipment Corp products.

 Check for obstructions (Wire, brake lines, fuel tank, etc.)

before drilling any holes!

 Use hardware provided with install kit.

 For product support, visit the Install Instructions Section

of our website at

http://havis.com/Installation/Installation.html, email

[email protected] or call 1-800-524-9900.

Ford Crown Victoria dashboard Remove ashtray and power point

housing from dash

A flat head screwdriver is needed to

release the tray from the slide tracks

C-VS-800-CV_INST_9-07

With the tray removed, wire

harnesses for the lighter outlet and

ashtray light will need to be

removed

Unplug from the accessories.

Remove the ashtray frame from the dashboard by removing the

hex head screws located in the back of the frame.

This is not necessary. If desired, you can cut the power point

bracket out of the ashtray/power point assembly.

ote: This must be removed in order

or the console to slide into

the ashtray slide rails.

ote: The next

ew steps are

or application requirin

the

relocation of the AM/FM radio and/or the HVAC controls. If

the removal of these controls is not required, proceed to page 3

Remove trim panel as shown above Remove the AM/FM radio from the

dash. Unplug the wire harness and

antenna. Re-route harness to OEM

ashtray location

Remove the (2) screws above the

HVAC controller to ease the removal

of the AM/FM Radio. Remove the

hex head screws holding the

controller to the dash.

(

necessar

C-VS-800-CV_INST_9-07

Remove wire plug going to

Ashtray/Power point frame

assembly

Power point detached from

assembly

Drill out spot-welds that hold the

power point bracket to the frame. This

needs to be removed in order for the

console to slide into the rail

Ashtray frame rail re-assembled Slide console into ashtray

frame slide rails

Re-install ashtray frame bracket

Re-route HVAC controller and the

AM/FM radio harness and antenna

to the VS console

It is necessary to notch the OEM

ashtray/power point frame assembly if

relocating the HVAC controls to the VS

console. This will allow the HVAC

vacuum hoses to reach the VS console

Notch Note: If NOT relocating

AM/FM radio and/or

HVAC controls, resume

installation at this point

C-VS-800-CV_INST_9-07

Attach using #10 x ¾” sheet metal

screws.

Holes are for screws to attach to the

OEM dash

Pre-drill OEM dash using holes in

console as a drill template

View of console from inside

Final installation of console

Install components according to

specific application

Install AM/FM radio if necessary, as

shown above.

Install HVAC controller into C-

EB40-ACV-1P as shown and install

into console above AM/FM radio

Altri manuali Havis-Shields Accessori per automobili

Havis-Shields

Havis-Shields WGI-F11 Manuale utente

Havis-Shields

Havis-Shields 1997-2008 Ford Expedition Interior Window Guards... Manuale utente

Havis-Shields

Havis-Shields C-B23 Guida alla configurazione

Havis-Shields

Havis-Shields K9/Prisoner Transportation System... Guida alla configurazione

Havis-Shields

Havis-Shields Telescoping Computer Base C-TCB-21 Guida alla configurazione

Havis-Shields

Havis-Shields Slide-Out Radio Tray C-3190 Manuale utente

Havis-Shields

Havis-Shields 2000-2005 Chevrolet Impala Trak-Mount Kit... Guida alla configurazione

Havis-Shields

Havis-Shields KR-SB-800 Manuale utente

Havis-Shields

Havis-Shields KK-K9-C14-K-32 Manuale utente

Havis-Shields

Havis-Shields Slide-Out Trunk Tray 2006-2008 Chevrolet Impala... Guida alla configurazione

Havis-Shields

Havis-Shields C-TCB-31 Manuale utente

Havis-Shields

Havis-Shields C-VS-1000-TAH Guida alla configurazione

Havis-Shields

Havis-Shields WBI-F7 Manuale utente

Havis-Shields

Havis-Shields Brow Mount KR-1531-24-SP-KOV Manuale utente

Havis-Shields

Havis-Shields KR-CCL-1-WP Manuale utente

Havis-Shields

Havis-Shields Interior Dome Light Manuale utente

Havis-Shields

Havis-Shields Telescoping Computer Base C-TCB-12 Guida alla configurazione

Havis-Shields

Havis-Shields Universal Telescoping Computer Base C-TCB-14 Guida alla configurazione

Havis-Shields

Havis-Shields Car Accessories C-VS-1600-EXPL Manuale utente

Havis-Shields

Havis-Shields WGI-D22 Manuale utente

Havis-Shields

Havis-Shields Telescoping Computer Base C-TCB-17 Guida alla configurazione

Havis-Shields

Havis-Shields K9/Prisoner Transport Unit KK-K9-C20-K-PT Manuale utente

Havis-Shields

Havis-Shields Cold Cathode Compartment Light KR-CCL Series Manuale utente

Havis-Shields

Havis-Shields Kwik-Kit KK-100-03 Guida alla configurazione

Manuali Accessori per automobili popolari di altre marche

James Baroud

James Baroud Odyssey Manuale utente

Motorola

Motorola i50sx Manuale utente

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manuale utente

Feniex

Feniex T3 Manuale utente

Renault

Renault 77 11 423 180 Manuale utente

Kia

Kia E8300-4D000 Manuale utente

Brink

Brink 756843 Manuale utente

Whispbar

Whispbar K085W Manuale utente

v.link

v.link CI-VL2-PC-HSD Manuale utente

Viking

Viking Stack-Rack Guida rapida alla configurazione

Aries

Aries 203015 Manuale utente

Choetech

Choetech AT0005 Manuale utente

ZZ2

ZZ2 ZZAIR-PRO Manuale utente

Holman

Holman 4A80L Manuale utente

Thule

Thule 2075 Manuale utente

Motorola

Motorola T325 Manuale utente

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guida all'installazione

DV8

DV8 FBJL-02 Manuale utente