Hawking HNC820G Manuale utente

Step 1: Check Contents & Installation Requirements 3

Step 2: Physical Description 8

Step 3: Hardware Installation 9

Step 4: Run the IP Setup Program 11

Step 5: Viewing & Tips 18

Appendix 20

Congratulations on the purchase of your new Hawking Net-VisionTM

HNC820G Wireless-G Pan/Tilt/Zoom Network Camera. The HNC820G

is a high performance stand-alone camera system that provides an ideal

solution for remote monitoring, surveillance, or sending live video over

the Internet. With pan, tilt, and 10x optical zoom capabilities, along with

many other advanced features, the HNC820G is an excellent addition to

any security or monitoring system. The camera offers a broad array of

applications and can be used to monitor homes, offices, banks, schools,

childcare centers, hospitals, and other industrial and public areas. Please

read this quick installation guide carefully before beginning your

installation.

General Installation:

Please review the cautionary instructions below before installing the

HNC820G:

•Keep the network camera away from water. If the network

camera is wet, power it off immediately. (If such an event

should occur, please contact your dealer.)

•If the camera begins to smoke or release an unusual smell, power

it off immediately. (If such an event should occur, please

contact your dealer.)

•Do not place the camera around heat sources such as ovens,

televisions, etc.

•Refer to the user’s manual for the correct operating temperature

range to ensure the proper operating environment.

•Keep the network camera away from direct sunlight.

•Do not place the network camera in humid environments.

•Do not place the network camera on unsteady surfaces.

•During thunder/lightning storms, be cautious of electrical surges.

•Do not disassemble the network camera.

•Do not drop the network camera.

•Do not manually pan and tilt the network camera while the

power is turned on.

•Do not insert any foreign objects into the camera.

Status LEDs

Note: For reference, please

locate the MAC Address

(same as Series Number)

on the bottom panel of the

unit.

A/V Out

Bottom Panel

Antennas

Front Panel

Rear Panel

Lens

Microphone

External mic.

External I/O

LAN port

Pwr. Input

2Locate the network cable connector

(RJ-45 port) on the left-hand side of the

rear panel of the camera. Connect an

Ethernet cable to the port. Connect the

other end of the cable to the network.

Please Note: For initial setup and

configuration, you will need to use a wired

connection. After completing the setup

and configuration, you can begin using

your network camera wirelessly.

3Locate the power input connector on

the left-hand side of the rear panel of the

camera and attach the external power

supply. To ensure the camera is powered

on, please check to see that the red

“Power/MIC” LED located on the black

lastic panel on the front of the camera is lit.

(To ensure a network connection, please

check to see that the green “Activity” LED

is lit or flashing.)

1If you choose to connect any external

devices such as sensors, alarms, etc., you

can connect them to the I/O terminal block.

(Please refer to the user’s manual for I/O

voltages.)

Please Note: You can attach the included wireless antennas at any time

before you begin using your network camera wirelessly.

Altri manuali per HNC820G

Indice

Altri manuali Hawking Telecamera di sicurezza

Hawking

Hawking HomeRemote HRNC1 Manuale utente

Hawking

Hawking HNC300 Manuale utente

Hawking

Hawking Net-Vision HNC800PTZ Manuale utente

Hawking

Hawking HNC820G Manuale utente

Hawking

Hawking HomeRemote Pro HRPC2 Manuale utente

Hawking

Hawking Net-Vision HNC700PT Manuale utente

Hawking

Hawking Net-Vision HNC700PT Manuale utente

Hawking

Hawking Net-Vision HNC700PT Manuale utente

Hawking

Hawking HomeRemote Pro HRPC1 Manuale utente

Hawking

Hawking Net-Vision HNC800PTZ Manuale utente

Hawking

Hawking HNC820G Manuale utente

Hawking

Hawking HNC320W Manuale utente

Hawking

Hawking HNC720G Manuale utente

Hawking

Hawking Net-Vision HNC800PTZ Manuale utente

Hawking

Hawking HNC320W Manuale utente

Hawking

Hawking HNC210 Manuale utente

Hawking

Hawking HNC720G Manuale utente

Hawking

Hawking Net-Vision HNC800PTZ Manuale utente

Hawking

Hawking HomeRemote HRNC1 Manuale utente

Hawking

Hawking HawkVision Smart Cam Pro HNC5W Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente