Hawksmoor CS5300-3 Manuale utente
SKU: 47912
53cc Petrol Chain Saw
WHAT'S IN THE BOX
If you do not have all these items, please contact:
www.coreservice.co.uk
Hotline: +44 01904 947568
Email [email protected]
Original User’s Instructions
PLEASE KEEP THESE INSTRUCTIONS FOR FURTHER REFERENCE
Chain saw x 1
Bar cover x 1
Fuel bottle x 1
Hex key x 1
Screw driver x 1
Socket wrench/ slotted
screw drive x 1
Oregon chain x 1
Oregon bar x 1
Brake cover x 1
2
SPECIFICATION
Technical Data
Model CS5300-3
Type of engine RY1E45F (air cooled 2-stroke petrol engine)
Fuel Tank Volume 550cm³
Oil tank volume 260cm³
Idle speed of the engine 3100±300/min
Engine speed with cutter running 4300/min
Maximum power 2.0kW
Displacement 53cm³
Maximum engine power speed 8500/min
Maximum engine speed 11000/min
Weight (empty tank, without accessories) 5.1kg
Cutting length 47cm
Chain pitch 8,255(0,325’)
Gauge of chain 1,47(0,058’’)
Maximal speed of the chain 21,2m/s
Type of chain Oregon 21BPX078X
Type of guide bar Oregon 208PXBK095
Sprocket (number of teeth x pitch) 7 Teeth x 8,255mm
Carburetor MC16A7-1/HLIC
Spark plug L8RTF/LD NHSP
Sound Pressure
Uncertain K
LpA,eq: 93dB(A)
Uncertain KpA=3,0dB(A)
Sound power LWA,eq: 108.7dB(A) K=3 dB(A)
Guaranteed power level LwA,d: 114dB(A) (2000/14/EC)
Value of vibration a front_hv,eq: max. 10.0 m/s² ,K=1,5m/s²
a rear_hv,eq: max. 9.0 m/s² ,K=1,5m/s²
3
EXPLANATIONS AND SYMBOLS, CAUTIONS AND WARNINGS
Before any use, refer to the corresponding paragraph in the manual.
This symbol, before a safety comment, indicates a precaution, a warning or a danger.
Ignoring this warning can lead to an accident for yourself or for others. To limit the
risk of injury, fire, or electrocution, always apply the recommendations indicated.
Conforms to European Standards.
The exhaust gas is poisonous and asphyxiating. If inhaled, it may even be lethal. Do
not operate the engine
in closed or poorly-ventilated places.
Petrol and petrol vapours are extremely flammable.
DO NOT touch to prevent burns.
Wear hearing protection and eye protection (PPE) when using the device.
Wear dust protection.
Wear robust footwear when using the device.
Wear protective gloves when using the device.
4
114
Guaranteed sound power level data (114dB), in accordance with Directive 2000/14/
EC.
Beware of kickback (recoil).
Avoid contact with the tip of the guide bar (chain return point). This will result in
kickback of the chainsaw.
DO NOT hold the saw with one hand.
Hold the saw frmly with both hands. Place your right hand on the rear handle and
your left hand on the front handle.
DO NOT start or use the equipment close to people (especially children) or animals.
During operation, it is recommended that a minimum distance of 10 metres from other
people is maintained.
A product placed on the United Kingdom market meets the UKCA Marking
requirements.
5
HEALTH AND SAFETY
WARNING!
When using this type of power tool, basic precautions
should always be followed to reduce the risk of fire, electric
shock and injury.
• Read all instructions carefully before attempting to use this
product and retain these instructions. Be familiar with all the
operations described in these operating instructions. This
product must be operated and operated by experienced users.
• If you are giving this machine to others, please also provide
them with this instructions manual.
• Also read all markings on the product. The symbols on the tools
are explained in the manual.
• Use this machine as described in this instruction manual. It is
strictly forbidden to use this tool for applications other than
those described in this manual.
• Failure to follow these instructions can result serious injuries
and, in some cases, death.
• This product is intended for private domestic use only. Do not
use it for commercial purposes.
• Never let people unfamiliar with these instructions or children
use this product.
• National regulations may limit the use of the machine.
• People under the age of 18 must not use this product
• Keep in mind that the operator or user is responsible for
accidents or risks to other persons or their property.
• Do not use the tool if you are drunk, tired, under the influence
of drugs or ill. Do not use the tool if you are not in an adequate
physical condition.
• This tool is intended for outdoor use. Never use it indoors.
6
• When transporting the machine:
o Secure the machine during transport to prevent loss of fuel,
damage or injury.
o Use a carrying case to protect the cutter during transport.
• Keep people and animals away from the work area. Children and
people who do not know how to use this tool should not touch it
and handle it.
• Keep them at least 15 m from the machine during operation,
• Use the product only under daylight or under good artificial light.
• When using the machine, always wear full protective equipment
including a helmet, protective mask, ear protection, gloves, non-
slip footwear and protective clothing.
• Wear appropriate clothing. Do not wear loose or unbuttoned
shirts. Do not wear jewelry that may come in contact with
moving parts. If you have long hair, tie them down and wear an
appropriate safety helmet.
• Do not operate the product with damaged guards or shields not
in place.
• Keep hands and feet of the appliance at all times and especially
when turning the appliance off and on.
• Do not use the tool in an area where ventilation is poor. Gas
emissions can cause injury.
• Do not work when it rains and in bad weather. Do not use the
tool in damp locations.
• Do not use the tool in the presence of flammable liquids or
gases.
• Caution: The machine releases gases when it is used. Avoid
coming into contact with these gases.
• Keep the work area clear. Before working, inspect the work area
and remove any materials or objects that could cause accidents.
• Do not force the tool.
• Use only the accessories supplied or recommended by the
7
manufacturer. Use of other accessories may result in an
accident. Read the "Technical Data" section of this instruction
manual or ask your dealer for advice.
• Do not lean. Keep a good seating and balance at all times.
• To maintain tools and accessories carefully, keep cutting tools
sharp and clean for better and safer performance. Follow the
instructions in this manual to lubricate and change accessories.
• Always inspect the machine before and after operation. If the
tool is damaged or faulty, stop using the tool and bring it to an
authorized service for inspection and repair.
• Turn off the tool after use, when you leave it unattended, when
changing these accessories and before servicing.
• Keep handles dry, clean and free from oil and grease.
• Be concentrated when using the tool. Look at what you do,
make sense and do not use the tool when you are tired.
• Remove the blade guard before using the tool.
• A damaged guard or other part must be properly repaired or
replaced by an authorized service center, unless otherwise
specified in this instruction manual.
• Do not use the tool if the starter is not working (if it cannot be
turned ON and OFF).
• Place the equipment in a well-lit area on a flat, stable, dry and
well-ventilated surface, away from flammable materials and with
plenty of space for sparking and sharpening waste.
• Do not allow anyone, especially children, to come within a radius
of at least five meters around the work area when all work is in
progress.
• Immediately stop the tool in the event of a malfunction of the
motor or the ON/OFF button or in case of unusual noise.
• Do not use the tool if the starter is damaged.
• Do not move the chain with your hand with the wheel moving.
8
• Do not stop the chain with your hands or other objects.
• Treat the chain teeth with caution during operation; they can
cause severe cuts.
• When not in use, the machine must be stored in a dry, locked
place out of the reach of children.
• Before using the product and after any shock, please check it for
signs of wear or damage. Please carry out repairs if necessary.
• Always switch off the machine:
o Every time you leave the device unattended;
o Before releasing an obstruction;
o before checking, cleaning or working on the product;
o after hitting a foreign object;
o Every time the product starts to vibrate abnormally.
• Pay attention to foot and cutting injuries.
• Inspect and regularly service the product. Repairs should be
carried out only by an authorized service center or a similar
qualified specialist.
• When not in use, store the product out of the reach of children.
• Children should not play with plastic bags, sheets and small
parts! Keep them out of the reach of children. There is a danger
of suffocation!
• When transporting the tool, always add the blade guard to the
blade. Always carry the tool by holding the handle, never the
blade.
• Do not use the product on a slippery surface.
• Do not use the product on steep, slippery slopes.
• When planning your work schedule, allow enough time for rest.
Limit continuous use of the device, e.g. use 30 ~ 40 minutes
per session, and take 10 ~ 20 minutes of rest between work
sessions. Work a maximum of two hours per day
• If the machine has struck foreign objects, check if the tool is
9
damaged and bring it to repair if necessary.
• Do not place any part of the body on the chain when the
chainsaw is operating. Before starting the chain saw, make
sure that the chain is not in contact with anything. A moment of
inattention during use may cause your clothing or body part to
stick to the chain.
• Always hold the chainsaw back handle with your right hand
and the front handle with your left hand. Hold the chainsaw by
inverting your hands increases the risk of personal injury and
should never be used.
• For the chainsaw designed with the chain guide on the left side,
the reference to the "right hand" and "left hand" positions is
reversed.
• When cutting a branch that is under stress, pay attention to
the risk of elastic return. When the tension of the wood fibers is
released, the spring-loaded limb may strike the operator and / or
project the chain saw out of control.
• Exercise extreme caution when cutting brush and young shrubs.
Fine materials can grip the cutting chain and be thrown as a
whip in your direction, or you lose balance under the effect of
traction.
• Follow the instructions for lubrication, tension and chain change
accessories. A chain whose tension and lubrication are incorrect
can either break or increase the risk of rebound.
• Keep handles dry, clean and free of oil and grease. Oily, greasy
grips are slippery and cause loss of control.
• Cut only wood, as well as for pruning and cutting wood. Do not
use the chain saw for any other purpose. For example: do not
use it to cut plastic, masonry or construction materials other
than wood. Using the chain saw for operations other than those
specified may result in hazardous situations.
• Be careful when using the machine during stormy weather. Do
not use the machine during lightning, thunderstorms or in bad
10
weather in general.
Fuel Handling
• Be very careful when handling fuels. They are flammable and the
vapors are explosive.
• Use only an approved container.
• Never remove the fuel cap or add fuel while the machine is on.
Turn off the unit and allow the engine and exhaust components
to cool before refueling.
• Do not smoke.
• Never refuel inside a room
• Never store the tool and the fuel tray indoors where there is a
naked flame, such as near a water heater.
• If fuel has spilled, do not attempt to start the machine, but rather
move it away from the spill before starting to use it. Clean any
spills.
• Replace and tighten the fuel tank cap after refueling.
• Follow the instructions in this manual for filling the tool with fuel.
During maintenance and storage
• Stop the tool and wait until it stops. Make sure all moving parts
have come to a standstill.
• Allow the machine to cool before performing inspection,
adjustments, maintenance, servicing and storage.
• Store the tool where fuel vapor will not reach a flame or spark.
• When transporting and storing, always place the tool in its
transport guard and protective device on it.
Causes of rebounds and prevention by the operator
• Bounce may occur when the spout or end of the chain guide
touches an object, or when the wood tightens and pinches the
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Hawksmoor Motosega
