Hay KNIT Manuale utente
–INSTRUCTION MANUAL –
DESIGN BY JIN KURAMOTO
KNIT
–PARTS –
A
Leg x3
C
Allen key x1
D
Template x1
B
Screw x3
–PARTS –
1.
Unfold the template
D
and place it on the floor. Insert a screw
B
in the hole, pushing
it all the way through the leg
A
as shown in the drawing. Place the leg on the template
in the circle marked with
1
. Then add another leg on top of the first leg and place the
base in the circle marked with
2
.
2.
Use the Allen key
C
to tighten the screw loosely.
3.
Insert the third leg with the help of another person. Follow the leg positioning as
indicated in the drawing - the leg is passed above the first leg and underneath
the second one.
4.
Make sure all three legs are standing within the circles on the template before
inserting the two remaining screws.
Then tighten both screws loosely, before tightening all three screws completely.
5.
Done!
NOTICE
Make sure to hang any
garments or bags evenly on
the hooks to avoid the coat
rack from overbalancing.
–CARE & MAINTENANCE –
Our Care & Maintenance offers guidance for optimal
maintenance of your HAY product. It includes advice
and instructions on cleaning and caring for specific
materials to prolong the life of your furniture.
Please find our Care & Maintenance
guide by scanning the QR code
You can find more relevant information
on Knit by scanning the QR code
You can also find the same information here
hay.dk/downloads
Altri manuali per KNIT
2
Indice
Altri manuali Hay Rack e supporto
