Hayes ADSL Ethernet Modem Manuale utente

ADSL

Ethernet Modem

U S E R ’ S G U I D E

NOTICE

This document contains proprietary information protected by copyright, and

this Manual and all the accompanying hardware, software, and

documentation are copyrighted. No part of this document may be

photocopied or reproduced by mechanical, electronic, or other means in

any form.

The manufacturer does not warrant that the hardware will work properly in

all environments and applications, and makes no warranty or representation,

either expressed or implied, with respect to the quality, performance,

merchantability, or fitness for a particular purpose of the software or

documentation. The manufacturer reserves the right to make changes to the

hardware, software, and documentation without obligation to notify any

person or organization of the revision or change.

All brand and product names are the trademarks of their respective owners.

Contents

1. INSTALLATION INSTRUCTIONS........................................... 1

1.1 IMPORTANT! BEFORE YOU BEGIN ..................................... 1

1.2 PACKAGE CONTENTS...................................................... 1

1.3 QUICK START INSTRUCTIONS............................................... 3

Step 1: Installing the Software ......................................... 3

Step 2: Installing the Hardware........................................ 4

Step 3: Configuring Internet Explorer................................ 5

Step 4: Establishing Communication ................................. 7

1.4 IF YOU NEED HELP ......................................................15

2. ONLINE GAMING........................................................... 16

2.1 DO I NEED TO DO ANYTHING?.......................................16

2.2 CHOOSING AN IP ADDRESS FOR GAMING...........................17

2.3 SETTING UP A FIREWALL FILTER FOR YOUR COMPUTER

(OPENING PORTS FOR GAMING)...............................................21

2.4 SETTING UP A FIREWALL FILTER FOR XBOX®LIVE ...............23

2.5 SETTING UP A FIREWALL FILTER FOR PLAYSTATION® 2.........25

2.6 ASSIGNING THE FILTER TO YOUR INTERNET CONNECTION......26

2.7 TURNING THE FILTER ON AND OFF...................................27

3. ADVANCED SETUP OPTIONS ............................................ 29

3.1 WAN SETTINGS..........................................................30

3.1.1 PPP Connections ...............................................31

3.1.2 1483 Bridged with DHCP....................................34

3.1.3 1483 Bridged with Static IP................................35

3.1.4 1483 Routed with Static IP Connection ...............36

3.1.5 1483 Bridged (Pure Bridge Mode).......................38

3.1.6 AutoPPP............................................................39

3.1.7 AutoBridge........................................................41

3.2 WAN IP FILTER .........................................................42

3.3 LAN INTERFACE..........................................................46

3.4 LAN IP FILTER...........................................................47

3.5 IP REMAP FILTER ........................................................48

3.6 MAC FILTER ..............................................................50

3.7 ROUTING CONFIGURATION.............................................51

3.8 SERVICES ..................................................................53

3.9 TRAFFIC SHAPING PROFILE ............................................54

3.10 DNS & DHCP SERVER.................................................55

3.11 DHCP RELAY.............................................................57

3.12 MANAGEMENT ACCESS CONTROL .....................................58

ii Hayes ADSL Due User’s Guide

3.13 CONNECTION LOOPBACK................................................59

3.14 NTP SERVER..............................................................60

4. STATUS MONITORING .................................................... 61

4.1 ADSL STATUS............................................................61

4.2 SYSTEM STATUS..........................................................64

4.3 PROCESSES................................................................66

4.4 MEMORY USAGE..........................................................67

4.5 ADSL CONNECTION MONITOR........................................67

5. ADMINISTRATION ......................................................... 69

5.1 SYSTEM LOG ..............................................................69

5.2 PASSWORD ................................................................70

5.3 FIRMWARE UPDATE......................................................71

5.4 RESET TO DEFAULT......................................................72

5.5 REBOOT SYSTEM .........................................................72

5.6 FILE UPLOAD..............................................................72

5.7 LOGOUT....................................................................73

5.8 DIAGNOSTIC INFO .......................................................73

APPENDIX A DSL INTERNET SETTINGS TABLES.......................... 74

APPENDIX B FRONT PANEL DESCRIPTION................................. 76

APPENDIX C LOCATING A MAC ADDRESS ................................. 77

APPENDIX D MACINTOSH AND LINUX USERS: CONFIGURING TCP/IP

SETTINGS........................................................................... 79

Macintosh TCP/IP Settings ..............................................79

Linux Network Settings ...................................................80

APPENDIX E TROUBLESHOOTING ........................................... 82

APPENDIX F REGULATORY INFORMATION.................................. 86

Installation Instructions

1.1 Important! Before You Begin

Before you install your ADSL modem, you must have DSL

service enabled on your telephone line. To do this, you need

to sign up with a DSL service provider.

1.2 Package Contents

Check that your package includes the items shown:

2 Hayes ADSL Ethernet User’s Guide

The CD contains the installation software, documentation,

warranty, and Customer Support information.

If anything is missing or damaged, contact Hayes Customer

Support or your retailer or distributor.

In addition, you may have

•DSL line filters (certain units only)

•Phone-jack adapter to adapt the RJ-11 phone cord to a

different phone jack (certain units only)

You Will Also Need

•A Windows 98SE/2000/Me/XP computer equipped with a

Network Interface Card (NIC).

•An ADSL-enabled telephone wall jack to plug the ADSL

modem into.

1.3 Quick Start Instructions

Installing the ADSL Ethernet involves four steps: Installing the

Software, Installing the Hardware, Configuring Internet

Explorer, and Establishing Communication.

Step 1: Installing the Software

Windows 98SE, Me, 2000, and XP Users: You must install the

software BEFORE connecting the hardware.

Macintosh and Linux Users:

You do not need to run the CD software.

Skip to Step 2, Installing the Hardware.

1Your computer must be on. Insert the supplied CD into

your computer. The CD should start automatically and the

Select Language screen should appear. (If the CD does not

start automatically, on the desktop, click the Start button,

click Run and then type D:\setup.exe, where Dis the

letter of your CD-ROM drive.)

2At the Select Language screen, make your selection. Then the

ADSL Modems menu is displayed:

4 Hayes ADSL Ethernet User’s Guide

3Click the ADSL Modem Installation Wizard button.

4At the next screen, select ADSL Ethernet. The software

installation then proceeds automatically.

5When the process is complete, you will be prompted to click

Finish. Now shut down your computer and install the

modem hardware.

Step 2: Installing the Hardware

Your computer should be shut down.

Rear panel ports

1Plug one end of the straight-through Ethernet (10BaseT) cable

into the modem’s ETHERNET port and plug the other end

into your computer’s Ethernet port.

Note: You can also attach the ADSL Ethernet to an access

point, switch, or network hub via its ETHERNET port and

thus connect multiple computers.

•If your hub has an uplink or daisy chain port, you can use

the supplied straight-through Ethernet cable to connect

the two.

•If you are using a wireless access point, you need a

crossover Ethernet cable (sold separately).

Throughout this manual, when we refer to an Ethernet

connection, it should be understood that this connection may

be to a computer, wireless access point, or hub.

2Plug the included power cube into a power strip or wall outlet

and then into the modem’s power (PWR) jack.

IMPORTANT: Use only the power cube shipped with

the modem. Other power cubes may damage your

hardware.

The PWR light should become steady on, and the LINK light

should blink once. If the PWR light doesn’t turn on, make sure

there is power at the wall outlet or power strip where you

plugged in the power cube.

3Turn the computer on.

4Plug one end of the supplied phone cord into the modem’s

ADSL jack and the other end into the ADSL wall jack. The

LINK light should blink and then become steady on. If it

doesn’t, consult Appendix E, Troubleshooting.

5Finally, while phone filters are not absolutely required, we

HIGHLY RECOMMEND that you install a filter on

EVERY phone that is sharing the DSL phone line.

Phone filters block the DSL frequencies so that someone

making a normal phone call won’t hear noise on the line.

They also keep phone conversations from interfering with

DSL performance.

You may have received DSL filters with your modem. If you

did not, or need more filters, they are available at most retail

stores that carry consumer electronics.

Plug the phone or fax cord into the filter’s PHONE end and

plug the filter’s LINE end into the wall jack.

Continue below with Configuring Internet Explorer.

Step 3: Configuring Internet

Explorer

Macintosh and Linux users: Your Web browser is set up

automatically, so you can skip this section. Turn to the TCP/IP

Settings Appendix on page 79 to make sure that the computer’s

network, or TCP/IP settings, are configured correctly, and then go

6 Hayes ADSL Ethernet User’s Guide

to Step 4, Establishing Communication, on page 7.

Windows users: Your software that you use to make an Internet

connection must be set for a network connection, not a dial-up

connection. The instructions below are for Internet Explorer, the

most popular Web browser. If you are using Netscape Navigator

or another browser, set it up now to use a network connection

(this might be called a “Local Area Network” or “broadband”

connection).

If you use Internet Explorer, you need Version 5 or later. Most

people have the right version. If you don’t, we suggest you get a

free upgrade.

If you want to check your version number, open Internet Explorer,

select Help, then About Internet Explorer. Your version number

is right under the Microsoft Internet Explorer logo. You can ignore

all the numbers after the period following the first digit.

1On the desktop, right-click the Internet Explorer icon, and

select Properties.

If you cannot access Internet Explorer:

Windows XP users: From the desktop, click the Start button,

then click Control Panel. In Control Panel, click Network

and Internet Options and then click the Internet Options

icon.

Windows 98/Me/2000 users: From the desktop click the Start

button, point to Settings, and then click Control Panel. In

Control Panel, click the Internet Options icon.

2In the Internet Properties dialog box, click the Connections

tab.

3On the Connections tab, click Setup.

4Windows XP users: In the Welcome to the New Connection

Wizard dialog box, click Next.

If you see a Location Information dialog box, click Cancel

to return to the Welcome dialog box, and click Next again.

In the Network Connection Type dialog box, click Connect

to the Internet.

In the Getting Ready dialog box, click “Set up my

Indice

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza