Hayward OmniLogic Manuale utente
Qu
i
c
k
Re
fe
re
n
ce
G
u
id
e
Wired Network Setup
MSP
Ethernet Cable to
Router LAN Port
Computers,
and other devices Internet
Connection
Home Router
1. Connect MSP to Home Router
2. Congure wired connection by selecting:
Cong>Wired Networking>
Note: Network status (top left)
should be in “ON”position
For dynamic (DHCP):
Note: Network status (top left)
should be in “ON”position
For static (Fixed IP):
conrm and save with check mark
select “dynamic” on text bar
select “static” on text bar
enter IP for each eld
conrm and save with check mark
LAN (PoE)LAN
WLAN
LAN
PWR
Qu
i
c
k
Re
fe
re
n
ce
G
u
id
e
-
Wi-Fi Bridge Setup
HLWLAN Network Setup
MSP
HLWLAN
1. Connect HLWLAN hardware to OmniLogic
2. Congure Wi-Fi bridge by selecting Cong>wi bridge>
Note: DO NOT reverse Ethernet assembly
Incorrect setup may cause hardware failure
3’ Ethernet Cable
15’ Ethernet Cable
HLW LAN Power to MPP
Note: May take several minutes to
connect once credentials are
accepted
A. Select the desired network name
(SSID) from the list that appears,
then enter the network password
Note: Passwords ARE case
sensitive and may be supplied by
the router
B. Verify IP addresses are present after
connecting to Wi-Fi, If no IPs, check
information and repeat Step A
To take a closer look or see other Hayward products please go to:
www.hayward.com or call 1-844-365-6442
If no IP address is issued:
Verify network encryption through router
Check connection and signal strength using another Wi-Fi ready device
To view OmniLogic tutorials please visit: www.hayward.com/omnivideos
QRG-OLNETSf
Altri manuali per OmniLogic
4
Indice
Altri manuali Hayward Hardware di rete
Manuali Hardware di rete popolari di altre marche
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuale utente
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuale utente
Yudor
Yudor YDS-16 Manuale utente
D-Link
D-Link ShareCenter DNS-320L Manuale utente
Samsung
Samsung ES1642dc Istruzioni per l’uso
Honeywell Home
Honeywell Home LTEM-PV Istruzioni per il montaggio
