HBM S2M Series Manuale utente
Mounting Instructions | Montageanleitung |
Notice de montage | Istruzioni per il montaggio
English Deutsch Français Italiano
S2M
Hottinger Baldwin Messtechnik GmbH
Im Tiefen See 45
D-64239 Darmstadt
Tel. +49 6151 803-0
Fax +49 6151 803-9100
www.hbm.com
Mat.: 7-2001.3592
DVS: A3592-1.3 HBM: public
10.2015
EHottinger Baldwin Messtechnik GmbH.
Subject to modifications.
All product descriptions are for general information only.
They are not to be understood as a guarantee of quality or
durability.
Änderungen vorbehalten.
Alle Angaben beschreiben unsere Produkte in allgemeiner
Form. Sie stellen keine Beschaffenheits- oder Haltbarkeits
garantie dar.
Sous réserve de modifications.
Les caractéristiques indiquées ne décrivent nos produits
que sous une forme générale. Elles n'impliquent aucune
garantie de qualité ou de durablilité.
Con riserva di modifica.
Tutti i dati descrivono i nostri prodotti in forma generica e non
implicano alcuna garanzia di qualità o di durata dei prodotti
stessi.
Mounting Instructions | Montageanleitung |
Notice de montage | Istruzioni per il montaggio
English Deutsch Français Italiano
S2M
2A3592-1.3 HBM: public S2M
English
1 Safety instructions 4........................................
2 Scope of supply and equipment variants 10...................
3 General application instructions 12...........................
4 Structure and mode of operation 13...........................
4.1 Measuring body 13............................................
4.2 Strain gauge covering agent 13.................................
4.3 Disturbance variables 13.......................................
5 Conditions on site 14........................................
5.1 Ambient temperature 14.......................................
5.2 Moisture and humidity 14......................................
5.3 Deposits 15..................................................
6 Mechanical installation 16....................................
6.1 Important precautions during installation 16......................
6.2 General installation guidelines 16...............................
6.3 Mounting the S2M 19..........................................
6.3.1 Mounting with tension/compression bars 19......................
6.3.2 Mounting with direct connection 20..............................
6.3.3 Mounting with knuckle eyes 20.................................
7 Electrical connection 24......................................
7.1 Connection in a six‐wire configuration 24.........................
7.2 Connection in a four‐wire configuration 25........................
7.3 Shortening the cable 25.......................................
7.4 Extension cable 26............................................
7.5 EMC protection 26............................................
Safety instructions
4A3592-1.3 HBM: public S2M
1 Safety instructions
Designated use
The force transducers in the type series S2M are solely
designed for measuring static and dynamic tensile and/or
compressive forces within the load limits specified by the
technical data for the respective maximum capacities.
Any other use is not the designated use.
To ensure safe operation, the regulations in the mounting
and operating instructions, together with the following
safety rules and regulations, and the data specified in the
technical data sheets, must be complied with. It is also
essential to observe the applicable legal and safety regu
lations for the application concerned.
The force transducers are not intended for use as safety
components. Please also refer to the section: “Additional
safety precautions". Proper and safe operation of force
transducers requires proper transportation, correct stor
age, siting and mounting, and careful operation.
Loading capacity limits
The data in the technical data sheet must be complied
with when using the force transducer. In particular, the
respective maximum loads specified must never be
exceeded. The following limits set out in the technical
data sheets must not be exceeded
SLimit loads
SLateral load limits
SBreaking loads
SPermissible dynamic loads
STemperature limits
Safety instructions
S2M A3592-1.3 HBM: public 5
SLimits of electrical loading capacity
Please note that when several force transducers are
interconnected, the load /force distribution is not always
uniform.
Use as a machine element
The force transducers can be used as machine ele
ments. When used in this manner, it must be noted that,
to favor greater sensitivity, the force transducer was not
designed with the safety factors usual in mechanical
engineering. Please refer here to the section “Loading
capacity limits" and to the specifications.
Accident prevention
The prevailing accident prevention regulations must be
taken into account, even though the nominal (rated) force
values in the destructive range are well in excess of the
full scale value.
Additional safety precautions
The force transducers cannot (as passive transducers)
implement any (safety‐relevant) cutoffs. This requires
additional components and constructive measures for
which the installer and operator of the plant is respons
ible.
In cases where a breakage or malfunction of the force
transducer would cause injury to persons or damage to
equipment, the user must take appropriate additional
safety precautions that meet at least the requirements of
applicable safety and accident prevention regulations
(e.g. automatic emergency shutdown, overload protec
tion, catch straps or chains, or other fall protection).
Safety instructions
6A3592-1.3 HBM: public S2M
The layout of the electronics conditioning the measure
ment signal should be such that measurement signal fail
ure does not cause damage.
General dangers of failing to follow the safety
instructions
The force transducers are state‐of‐the‐art and reliable.
There may be risks involved if the transducers are moun
ted, sited, installed and operated inappropriately, or by
untrained personnel. Every person involved with siting,
starting‐up, operating or repairing a force transducer
must have read and understood the mounting instruc
tions and in particular the technical safety instructions.
The force transducers can be damaged or destroyed by
non‐designated use of the force transducer or by
non‐compliance with the mounting and operating instruc
tions, these safety instructions or any other applicable
safety regulations (BG safety and accident prevention
regulations) when using the force transducers. Force
transducers can break, particularly in the case of over
loading. The breakage of a force transducer can also
cause damage to property or injury to persons in the
vicinity of the force transducer.
If force transducers are not used according to their desig
nated use, or if the safety instructions or specifications in
the mounting and operating instructions are ignored, it is
also possible that the force transducer may fail or mal
function, with the result that persons or property may be
affected (due to the loads acting on or being monitored
by the force transducer).
The scope of supply and performance of the transducer
covers only a small area of force measurement techno
logy, as measurements with (resistive) strain gauge
sensors presuppose the use of electronic signal condi
tioning. In addition, equipment planners, installers and
Safety instructions
S2M A3592-1.3 HBM: public 7
operators should plan, implement and respond to the
safety engineering considerations of force measurement
technology in such a way as to minimize residual
dangers. On‐site regulations must be complied with at all
times.
Important instructions for your safety are specifically
identified. It is essential to follow these instructions in
order to prevent accidents and damage to property.
Symbol Significance
WARNING This marking warns of a potentially dangerous
situation in which failure to comply with safety
requirements can result in death or serious physical
injury.
CAUTION This marking warns of a potentially dangerous
situation in which failure to comply with safety
requirements can result in slight or moderate physical
injury.
Notice This marking draws your attention to a situation in
which failure to comply with safety requirements can
lead to damage to property.
Important
This marking draws your attention to important
information about the product or about handling the
product.
Tip
This marking indicates application tips or other
information that is useful to you.
Conversions and modifications
The transducer must not be modified from the design or
safety engineering point of view except with our express
agreement. Any modification shall exclude all liability on
our part for any damage resulting therefrom.
Safety instructions
8A3592-1.3 HBM: public S2M
Maintenance
The S2M force transducer is maintenance free.
Disposal
In accordance with national and local environmental pro
tection and material recovery and recycling regulations,
old transducers that can no longer be used must be dis
posed of separately and not with normal household
waste.
If you need more information about disposal, please con
tact your local authorities or the dealer from whom you
purchased the product.
Qualified personnel
Qualified personnel means persons entrusted with siting,
mounting, starting up and operating the product, who
possess the appropriate qualifications for their function.
This includes people who meet at least one of the three
following requirements:
SKnowledge of the safety concepts of automation tech
nology is a requirement and as project personnel, you
must be familiar with these concepts.
SAs automation plant operating personnel, you have
been instructed how to handle the machinery. You are
familiar with the operation of the equipment and tech
nologies described in this documentation.
SAs system startup engineers or service engineers,
you have successfully completed the training to qual
ify you to repair the automation systems. You are also
authorized to activate, ground and label circuits and
equipment in accordance with safety engineering
standards.
Altri manuali per S2M Series
1
Indice
Lingue:
Altri manuali HBM Trasduttore
