HD-iP VHDIPL-8 Concept Pro Manuale utente
VHDIPL-8
8 CHANNEL NVR
PLUG & PLAY
USER MANUAL
i
About this document
Purpose
This document is for the VHDIPL-8, including the product features, hardware
installation, network access, network configuration, daily maintenance, and
troubleshooting.
Intended Audience
This document is intended for:
Technical Support Engineer
Maintenance Engineer
End User
Symbol Conventions
This symbol may be found in this document and are defined as follows:
Symbol
description
Alerts you to a high risk hazard that could, if not avoided,
result in moderate or minor in injury.
Alerts you to a medium or low hazard that could, if not
avoid, result in moderate or minor in injury.
Alerts you to a potentially hazardous situation that could, if
not avoid, result in damage, data loss, performance
deterioration, or unanticipated results.
Provide a tip that may help you solve a problem or save
time.
Provides additional information to emphasize or
supplement important points in the main text.
ii
Contents
About this document................................................................................................... i
1 Preface........................................................................................................................ 1
1.1 Important note ................................................................................................................ 1
1.2 Check the installation environment ................................................................................ 2
2 Specification ............................................................................................................. 3
3 VHDIPL Networking solutions ............................................................................ 5
4 Installation ................................................................................................................ 6
4.1 Estimated Storage Times ................................................................................................ 6
4.2 Front panel description ................................................................................................... 7
4.3 Rear panel description .................................................................................................... 7
4.4 First boot ........................................................................................................................ 9
4.5 Shutdown ..................................................................................................................... 10
4.6 Display resolution adjustment ...................................................................................... 10
4.7 Add network cameras ................................................................................................... 12
4.8 Login ............................................................................................................................ 13
5 Quick configuration .............................................................................................. 14
6 Live video ................................................................................................................ 18
7 Playback................................................................................................................... 22
7.1 Recording playback ...................................................................................................... 22
7.2 Recording backup ......................................................................................................... 23
8 Alarm searching ..................................................................................................... 27
9 Setup ........................................................................................................................ 29
9.1 VHDIPL setup .............................................................................................................. 29
9.2 Camera management .................................................................................................... 41
10 Web Browser Access for VHDIPL .................................................................... 42
10.1 Login .......................................................................................................................... 42
10.2 Operation Read ........................................................................................................... 43
10.3 Live video................................................................................................................... 45
10.4 Playback ..................................................................................................................... 46
10.5 Alarm search ............................................................................................................... 48
iii
10.6 VHDIPL setup ............................................................................................................ 49
10.7 Network camera setup ................................................................................................ 50
11 HD-IP Access for VHDIPL................................................................................. 51
11.1 Start and run ............................................................................................................... 51
11.2 Login .......................................................................................................................... 51
11.3 System main interface ................................................................................................ 52
11.4 VHDIPL management ................................................................................................ 52
11.5 Playback ..................................................................................................................... 61
12 NVR Client………………………………………….……………………………63
12.1 Start and Run…………………………………………………………………………63
12.2 Login………………………………………………………………………………….63
12.3 System Main Interface………………………………………………………………..63
12.4 System Management………………………………………………………………….64
12.5 Live Video Playback…………………………………………………………….……68
13 HD-IP Lite App .................................................................................................... 70
13.1 HD-IP Lite Android Device………………………………………………………......70
13.2 HD-IP Lite iOS Device…………………………………………...…………………..71
14 F.A.Q....................................................................................................................... 72
1
1 Preface
1.1 Important note
Thank you for choosing the Concept Pro VHDIPL Network Video Recorder
(NVR). Please read this user manual carefully before installing the VHDIPL.
Never open or disassemble the device unless it is by a qualified or professional
person, as this product maybe damaged or cause electrical shock.
Video data loss caused by installation, configuration, improper operations, and hard
disk error is not the responsibility of the manufacturer.
Warranty will be void if the “void if broken” sticker is broken.
2
1.2 Check the installation environment
Installation environment
Before installing the device, check the installation environment according to Table 1-1
Table 1-1 Installation environment check items
Check item
standard
Moisture-resistant
The relative environment humidity must be in the range of 0%
to 95%. If the humidity is higher than 95%, a dehumidifier must
be installed, such as an air conditioner with the
dehumidification function or a dedicated dehumidifier. In
addition, water seepage, water dropping, and dew forming will
cause damage and will not be covered under the warranty.
Dustproof
The VHDIPL should be installed in a dust free environment to
minimise mechanical breakdown.
Light
The device must be not be installed in direct sunlight.
Installation notice
During the installation, please note:
VHDIPL power input voltage is AC110/220V, 47-63Hz.
VHDIPL should be kept horizontal.
VHDIPL shouldn't be installed in high temperature environments.
Make sure the VHDIPL is connected with other equipment correctly.
Others
Please use a soft dry cloth to clean the VHDIPL, do not use chemical solvents.
Do not place items on top of the VHDIPL.
3
2 Specification
System
CPU
SOC
Operating system
Embedded Linux 2.6
Features
Embedded CMS system, user friendly interface, easy to use
Quick configuration and simple operation.
Plug-and-play, auto detection and schedule setup.
Real-time fault alarm mechanism for timely reporting of hard disks, networks, fault
information. Embedded Web Server using Flash technology to support common
browsers with real-time monitoring and playback.
Video
Record Info
8ch recording, Maximum recording Bandwidth is 36 Mbps
Support resolution: 1080P, 720P and D1
Ability to decode
H.264 (ISO / IEC 14496-10) high profile 4.2
4ch up to 1080P playback
Real-time video
Single screen: 1 x 1080p/720p/D1 resolutions with tour
Quad display of 1080p/720p/D1 resolutions
Split screen 1/4/6/8/9 for D1 resolutions
Output
1 x VGA and 1 x HDMI output and can be displayed at the same time
Storage
HDD
2 hard disk, maximum 2 x 4TB hard drive supported
Audio
In / Out
3.5mm linear audio output
4
Audio formats
G711_A，G711_U
Network
Transmission control
Embedded network bandwidth adaptive flow control technology.
Interface
2 RJ45 10M/100Mbps network port.
Web
Web server supported with Flash technology for and popular browsers in real-time
monitoring, video playback, and system configuration.
Network protocol
RTP/RTCP, TCP/UDP, ONVIF, HTTP, DHCP, DNS Client, RTMP for Flash Video
Characteristic
Temperature
Ambient temperature: 0 ° C -45 ° C, using industrial grade microprocessor, intelligent
heating and cooling.
Humidity
0% to 90%
Power consumption
Low-power design, motherboard max power consumption 8W; with 2 x 3TB hard disk
increases 40W power consumption.
Power input
AC110/220V, 47-63Hz.
Thermal
The main chip heat sink, plus intelligent temperature controlled fans.
Size
Chassis：372mm x 300mm x 45mm（L x W x H）
Weight
2.23Kg No HDD installed.
USB
2x USB 2.0 interface, respectively as a backup and USB mouse.
5
3 VHDIPL Networking solutions
The VHDIPL has 9 Ethernet ports, one is RJ45 without POE, others are POE supported
ports. The 8 POE ports are for connecting to the cameras. Cameras should not exceed a
distance of 100 metres from the POE Ports.
POE port
The POE ports on the VHDIPL can connect to the cameras directly. The VHDIPL will
add the cameras automatically if connected to the POE ports and the default recording
is 24 hours * 7 days a week. Note the POE only supports IEEE 802.3af standard .
10M/100Mbps RJ45 Internet port
When connecting to the Internet or local network, the VHDIPL needs a CAT5 cable
running to a switch or router at a distance of less than 100 metres.
The camera dedicated network topology is shown in Figure 3-1
Figure 3-1 camera dedicated network
6
4 Installation
4.1 Estimated Storage Times
Table 4-1 Estimated video storage time
HDD capacity
Video stream
Cameras
Days recorded
2x4TB
D1 1.5Mbps
8
60
2x4TB
720p 3Mbps
8
30
2x4TB
1080p 4.5Mbps
8
21
Indice
Manuali Hardware di rete popolari di altre marche
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuale utente
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuale utente
Yudor
Yudor YDS-16 Manuale utente
D-Link
D-Link ShareCenter DNS-320L Manuale utente
Samsung
Samsung ES1642dc Istruzioni per l’uso
Honeywell Home
Honeywell Home LTEM-PV Istruzioni per il montaggio
