General operation:
When the thermostat is powered up, the version number will be displayed. If you
hold the menu button for 3 seconds, the thermostat will turn off, all the settings,
including time and date will be saved. To turn the thermostat back on press the
menu button again.
Operation mode:
Auto mode
Select Auto if you want the temperature to be controlled automatically via the 4-
Event schedule.
Hold/Manual mode:
Select Hold/Manual to cancel the programmed Event schedule (e.g. during
holidays) and to set the required temperature manually. For example, you may want
to adjust the temperature to 5°C for frost protection while you are away. To exit out
of the manual mode and return to the program mode select Menu, then the Auto
option and confirm the requested information to return to the program mode.
Temp menu on the main screen:
By pressing the Temp button you are able to alter the target temperature of all
'Wake' and 'Return' events in the program settings or alternatively all 'Leave' and
'Sleep' events. This streamlines updating the programed schedules if you want to
make changes across the board.
To make changes press the Temp button and then select if you want to change all
'Wake' and 'Return' events or all 'Leave' and 'Sleep' events. Press OK and the
thermostat will show the current target temperature of those events. Raise or lower
this temperature to your desired level and then press OK to update the heating
schedule with this new temperature.
