Heddys HEBNC80 Manuale utente

HEBNC80

Bluetooth®

Noise Cancelling

Rechargeable

Heddys

Model

Owner’s Guide

Safety Information

• Always turn the volume control down on your sound source before

plugging in your headphones; then increase it to a comfortable level.

• Do not wear these headphones near traffic or in any other activity

where a failure to hear surrounding sounds could be dangerous.

• Maintenance and service operations are only to be carried out by

authorized dealers. Damage caused by manual modifications of the

product is not subject to warranty.

• If the product is used for purposes other than originally intended it

may suffer damage. Doing so will void its warranty.

• Long-term exposure to loud music may cause hearing damage.

It is best to avoid extreme volume when using these headphones,

especially for extended periods.

• Keep batteries out of reach of children.

• Avoid immersing or exposure to liquids otherwise failure may result.

• Do not drop your headphones as damage or failure may result.

Compliances

Declarations

All product specifications are subject to change without notice.

Contents

Introduction .................................................................................... 4

Package Contents ......................................................................... 4

Product Overview ........................................................................... 5

Controls ........................................................................................ 5

Using your new HEBNC80 Headphones:

Charging the Battery..................................................................... 6

Adjusting the Headband ............................................................... 6

Switching POWER ON/OFF ........................................................... 6

Connecting/Pairing to your Bluetooth® device ............................ 7

Music playback/control functions ................................................ 8

Telephone functions..................................................................... 8

Connecting via an Audio cable...................................................... 8

Active Noise-Cancelling mode ...................................................... 9

Cleaning and Maintenance/Battery Care...................................... 10

Troubleshooting............................................................................ 11

Technical Specifications ................................................................ 12

Warranty....................................................................................... 12

Introduction

Thank you for choosing headphones. This product has

been manufactured to the highest standards to ensure comfort

and trouble-free performance for years to come.

Package Contents

Included with your new headphones are the following items:

Detachable 3.5mm Audio cable

6.3mm to 3.5mm Stereo adapter

In-flight 3.5mm stereo to 2 x 3.5mm jack adapter

USB to micro USB Charging cable

Mesh bag

Hard Shell protective case

Owner’s Manual

Product Overview

Controls

Headphone: Left side

1 –LED Bluetooth® and

Battery indicator.

2 –Multi-Function Button (MFB)

3 –Microphone

4 –Charging port via micro USB

Headphone: Right side

5 –LED Noise-Cancelling

indicator.

6 –Noise Cancelling ON/OFF

7 –3.5mm Audio cable socket

Using your new headphones

Charging the Battery (Refer to the diagrams shown on Page 5)

Using the USB Charging cable supplied with your headphones,

plug the micro USB connector into the Charging port (4).

Connect the remaining USB connector into a standard USB charger

or USB computer port.

The LED Bluetooth® and Battery indicator (1) will glow RED,

showing that the internal battery is charging.

When charging is complete this LED will switch off automatically.

Adjusting the Headband

To achieve maximum comfort and effective Noise-Cancellation

ensure the headband is adjusted to provide you with a firm but

comfortable fitting onto your head with both cups of your

headphones located over your ears.

Switching Power ON/OFF

1. Power ON

Press and hold the MFB button (2) for approx. 3 seconds.

The LED Bluetooth® and Battery indicator (1) will rapidly flash

alternately from RED to BLUE with an ascending-pitch sound.

2. Power OFF

Press and hold the MFB button (2) for approx. 5 seconds.

The LED Bluetooth® and Battery indicator (1) will become RED

with a descending pitch sound.

Using your new headphones

Connecting/Pairing your Bluetooth® device

Your HEBNC80 headphones will work with Bluetooth® enabled

mobile phones and applicably featured audio devices. Prior to

using and pairing your headphones for the first time, please check

to make sure that the Bluetooth® function on your mobile phone

or device is enabled.

In general it is recommended that you refer to the pairing

instructions provided with your mobile phone/device.

The following instructions are for typical Bluetooth® enabled

mobile phones/audio devices.

1. Press and hold the MFB button (2) for approx. 4 seconds until

the Bluetooth LED Bluetooth® and Battery indicator (1) rapidly

flashes alternately between BLUE and RED.

Your headphones are now in PAIRING MODE.

2. Enable searching of nearby Bluetooth® devices on your device.

When you see HEBNC80 listed as FOUND on your device you

can now select CONNECT to pair with them.

Note: If your device prompts you for a password, enter 0000.

3. When pairing is successful, the LED Bluetooth® and Battery

indicator (1) will emit a BLUE flash every 4 seconds.

If pairing is unsuccessful please turn off your headphones and

repeat these pairing steps. For more details, please refer to the

Owner’s Manual supplied with your audio device.

4. Your headphones will automatically re-connect to the last

paired device when switched ON.

Using your new headphones

Music Playback/Control functions via Bluetooth®

Play/Pause Music Press the MFB button (2) once to START

Music playback and once again to PAUSE

music playback.

Next Track Press the MFB button (2) twice, briefly to

select the NEXT track.

Telephone functions via Bluetooth®

Answer a call Press the MFB button (2) once to

ANSWER.

End a call Press the MFB button (2) once again to

END.

Ignore a call Press & hold the MFB button (2) for 3 sec.

Swap calls between While speaking, press the MFB button (2)

HEBNC80 Headphones for 3 seconds. When a “BEEP sound is

and a Smartphone. heard, release the MFB button.

Connecting via an Audio cable

A Detachable 3.5mm Audio cable is provided for use with

multimedia devices that do not have Bluetooth capabilities.

Connect via the 3.5mm Audio socket (7).

Plug the 6.3mm to 3.5mm Stereo Adapter onto the end of this

Audio cable to provide compatibility with Stereo Headphone

Output sockets found on many Audio devices.

Using your new headphones

Active Noise-Cancelling Mode

The Active Noise-Cancelling feature on your new headphones will

greatly reduce unwanted noise, in particular that which is

experienced while travelling in domestic aircraft. This will add to

your in-flight entertainment experience and may reduce fatigue.

1. How to turn Active Noise-Cancelling ON

Slide the Noise-Cancelling ON/OFF switch (6) in an upwards

direction. The BLUE LED Noise-Cancelling indicator (5) will be ON.

Note: After you turn ON the power, you might hear a slight hissing

noise. This is a normal function and will cease after a few seconds.

2. How to turn Active Noise-Cancelling OFF

Slide the Noise-Cancelling ON/OFF switch (6) in a downwards

direction. The BLUE LED Noise-Cancelling indicator (5) will be OFF.

Notes:

When the battery is running low, the LED Noise-Cancelling

indicator (5) will become dim.

• Once the battery is fully drained, the Active Noise-Cancelling

feature will turn OFF but the audio signal from the music

player will continue to transmit.

• When not in use, switch the Active Noise-Cancelling feature

OFF to extend battery life.

Your HEBNC80 headphones may be used as conventional

headphones via the Audio cable even if the batteries are fully

drained.

Cleaning and Maintenance

It is not necessary to regularly clean your headphones, however if

you believe they do need cleaning please use a soft, dry cloth.

Avoid using chemical cleaners of any description.

Battery Care

Always charge your headphones using only a standard USB port or

charger and not any high current/fast charger devices.

Failure to observe this may result in permanent damage or fire.

The Lithium-Polymer batteries inside your headphones are not

user replaceable. Do not attempt to do so.

Failure to observe these warnings will void your warranty.

Indice

Manuali Cuffia popolari di altre marche

Sena

Sena SMH10 Manuale utente

IASUS

IASUS Stealth IA-NT4-BASIC-BT Manuale utente

Sennheiser

Sennheiser EPOS ADAPT 230 Manuale utente

Doro

Doro Flexus HS2005 Manuale utente

GE 98971 Manuale utente

Hama

Hama 00184070 Manuale utente

Plantronics

Plantronics Blackwire 3200 Series Manuale utente

Blue Tiger

Blue Tiger Advantage PLUS Manuale utente

Jawbone

Jawbone Icon Manuale utente

Jabra

Jabra FR 20 Manuale utente

Roxcore

Roxcore Flow A+ Manuale utente

Turtle Beach

Turtle Beach XP 510 Manuale utente

Philips

Philips SHB6101 Manuale utente

Jabra

Jabra PRO 9460 Duo Manuale utente

HyperX

HyperX HyperX Cloud Flight Manuale utente

Bose

Bose MIE2 Mobile Manuale utente

Jabra

Jabra Steel Manuale utente

HyperX

HyperX cloud ii Manuale utente