HeimVision Greets 1 Manuale utente
Smart Video Doorbell
Greets 1
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch
2
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention
to the safety instructions. If you have any questions or comments about the device,
please contact the customer line.
✉www.alza.co.uk/kontakt
✆+44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
3
Safety Cautions
1. For security, please use the original accessories provided.
2. Do not replace the batteries without the official guidance.
3. Please obey the local security regulations and policies when installing the products.
4. We assume no liability or responsibility for any fires or electrical shock caused by
improper installation.
Packing List
Doorbell with
Bracket
Chime
User Manual
USB Cable
3M Adhesive
Tapes
Torx Hex Key
Phillips Screwdriver
Nameplate Holder
Expansion Pipes and
M3x20 Screws
Reset Pins and
M3x5 Screws
Copper Wires with
2 U-shaped Terminals
Copper Wires with a
U-Shaped Terminal
and Wire nuts
4
Product Overview
Doorbell
1. Camera Lens
5. Wi-Fi Status Indicator
9. Charging
Indicator
12. Rubber
Plug
2.
Passive Infrared (PIR)
Sensor
6.
Microphone
10. Micro USB
Port
13. Screw
Hole for
M3x5 Screw
3. Speaker
7. AC Electrical Contacts
11 Reset Hole
4. Doorbell Button
8. Battery Compartment
Bracket
14. Screw Terminals
15. Screw Holes for M3x20 Screws
16. Screw Hole for M3x5 Screw
5
Chime
1. Speaker
3. Working Indicator
5. Reset
7. Ringtone
2. Pairing Indicator
4. Battery
Compartment
6. Volume ±
8. Micro USB port
Getting Started
1. Remove the protective film from the camera lens, then take the doorbell out
from the bracket.
6
2. Unscrew the Battery Compartment Door with the Phillips Screwdriver, take out
the batteries, then peel off the Insulation Film.
3. Insert a memory card (not included) to record videos. Or you can alternatively
subscribe to a cloud plan via the App
Notes:
•The doorbell accepts a memory card with capacity up to 128GB. If it’s needed,
please contact us or get it from an authorized HeimVision store.
•The doorbell is not designed for 7/24 all day recording. It will be woken up to
record videos according to your setting after you install a memory card or
subscribe to the cloud plan.
Insulation Film
7
4. Install the batteries into the compartment and fix the door with the screw. Make
sure the positive and negative poles of batteries are correctly aligned; otherwise,
the batteries would be damaged.
5. Remove the Rubber Plug with care, then charge the doorbell with the USB Cable
provided.
Charging: Red Charging Indicator
Fully Charged: Blue Charging Indicator
Notes:
•It takes about 10-12 hours to reach a full charge.
•You can launch HeimLife App, then go to Settings>Basic Function>Power
Management>Remaining Battery to check the percentage of the remaining
battery.
6. After a full charge, please insert the Reset Pin into the Reset Hole and gently
press it for 3s - 5s until you hear a beep from the doorbell to perform a reset.
8
Connect Your Doorbell to a Mobile Device
App Downloading and Installation
Option 1:
Search for HeimLife in the App Store/Google Pay, then download and install it to your
mobile device.
Option 2:
Scan the QR codes bellow to download and install the App.
Note:
•Google Pay is a trademark of Google Inc., and App Store is a trademark of Apple
Inc.
Account Registration and Login
Launch HeimLife App, register and account with a valid email address at the first use of
HeimLife App, then log in.
9
Notes:
•Please select the correcet country code when signing up and logging in.
•For a successful connection, please allow HeimLife App to use your WLAN and
Celluar Data when Running it.
•Please turn on the location service on your mobile device and allow HeimLife App
to access your lacation.
Connect the Doorbell to the HeimLife App
Important:
1. The doorbell can only support a 2,4 GHz Wi-Fi.
2. Avoid using special symbols / or ‘ in your Wi-Fi name and password.
3. Make sure that the doorbell and your mobile device are close to the router when
connectiong.
4. Make sure the power of your doorbell is enough when performing a reset.
5. The explanations of Wi-Fi Status Indicator:
Solid red
Device Abnormal
Solid Blue
Wi-Fi Connected
Flash Red Slowly
Ready for Wi-Fi
Connection
Flash Blue Quickly
Upgrading
Flash Red Quickly
Connecting to Wi-Fi
Flash Blue Slowly
Watching Live Video
10
Connecting the Doorbell by Scanning the QR Code
Tap + in the centre or
on the upper right
corner
Select doorbell
Tap Next to continue
Press the Doorbell
Button once, then tap
Next
Reset the doorbell
then tap Next
Select your router’s
Wi-Fi and enter the
correct password,
then tap Next
Tap next to show QR
code
Align the camera lens
with the QR code,
then tap Next after
hearing a beep
Wait for Wi-Fi Connection
Tap Done to complete the connection
Indice
Lingue:
