HeimVision HMD2 Manuale utente
Baterry Powered Camera
HMD2
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch
2
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention
to the safety instructions. If you have any questions or comments about the device,
please contact the customer line.
✉www.alza.co.uk/kontakt
✆+44 (0)203 514 4411
Importer
Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
3
SAFETY CAUTIONS
•For security, please use the original accessories provided.
•Do not replace the batteries without the official guidance.
•Please obey the local security regulations and policies when installing the
products.
•We assume no liability or responsibility for any fires or electrical shock caused by
improper installation.
PRODUCT OVERVIEW
LED INDICATOR
Lens
IR LED
PIR Sensor
Microphone
4
CONNECTING YOUR CAMERA TO A MOBILE DEVICE
App Downloading and Installation
Option 1:
Search for HeimLife from App Store™/Google Play™, then download and install it on
your mobile device.
Option 2:
Scan the QR codes below to download and install.
iOS Android
Speaker
Magnetic Mount
Hole
Memory Card Slot
Power Button
Reset Hole
Power Input
5
Note:
Google Play™ is a trademark of Google Inc., and App Store™ is a trademark of App Inc.
Account Registration and Login
Launch HeimLife App, register an account with a valid email address at the first use of
HeimLife App, then log in.
Notes:
•Please select the correct country code when signing up and logging in.
•For a successful connection, please allow HeimLife App to use your WLAN & Cellular
Data when running it.
•Please turn on the location service on your mobile device and allow Heimlife App to
access your location.
6
Connecting the Camera to the HeimLife App
IMPORTANT:
•Make sure the power of your camera is enough. You could use a 5V output power
adapter (not included) to charge it.
•The camera can only support a 2.4GHz Wifi.
•Avoid using special characters or symbols in your Wifi name and password, such
as @~!#$%^&* and so on.
•Ensure the camera and your mobile device are close to the router when
connecting.
•Press and hold the Power Button for 5 seconds to power on the camera, the LED
Indicator will be solid red during the startup process. Then it will change to flash
red slowly, which indicates the camera is ready to connect to Wifi.
•Insert the Reset Pin into the Reset hole and press for 5 second to reset the
camera if the connection failed or you need to connect the camera with another
HeimLife account.
There is a beeping sound from the camera after a successful reset.
•The explanations of LED Indicator:
LED Status
Camera Status
Flash Red Slowly
Ready for Wifi Connection
Flash Red Quickly
Connecting to Wifi
Solid Blue
Wifi connected
Solid Red
Network abnormal
Connecting by Scanning the QR Code
Step 1:
Log in to HeimLife App, tap and Battery Camera.
7
Step 2:
Start to connect the camera.
8
Make sure the LED indicator flashes RED slowly.
Select your router’s Wifi and enter Please select a 2.4GHz Wifi, this
the right password. device doesn’t support 5GHz Wifi.
Step 3:
Align the QR code on your mobile device with the lens of the camera and keep a
distance of 5-8 inches.
9
Tip:
If you didn’t hear the beep, please tap Help > More Options to connect it by AP Hotspot.
Step 4:
Wait for connection after scanning. Device Found stands for a successful connection,
then tap Done to start the experience.
The camera is connecting to your Tap to edit the name of the
wifi. camera.
Connecting by AP Hotspot
Step 1:
If the camera can’t be connected by scanning the QR code, a prompt of The device not
found will be displayed on the interface of Wifi Setup. Please tap other methods to
connect the camera by AP Hotspot.
10
More options to switch to AP Hotspot connection.
*Alternatively, tap Help and
Make sure the LED indicator flashes RED slowly.
Indice
Lingue:
Altri manuali HeimVision Macchina fotografica digitale
