Helioscreen RUBIX Manuale utente

www.helioscreen.com.au | Phone 1300 766 319

Helioscreen Rubix • INSTALLATION GUIDE | 1

INSTALLATION GUIDE

RUBIX

Helioscreen Australia Pty Ltd – Dealers Australia Wide

www.helioscreen.com.au | enquiries@helioscreen.com.au | Phone 1300 766 319

SAFETY NOTESAND IMPORTANT INFORMATION ARE INTEGRATED IN THE TEXT ASAPPROPRIATE. THESE NOTESARE

ALSO HIGHLIGHTED BY SYMBOLS.

This symbol means that the relevant note is important for the safety of persons or for the function of the awning.

This symbol highlights important product information for the installation engineer or user.

1. SAFETY NOTES, WARNINGSAND MOUNTING INFORMATION:

1.1 EXPLANATION OF THE SAFETY NOTES

1. SAFETY

1.1 Explanation of the safety notes .............................................................3

1.2 General safety information .............................................................. 3

2. INSTALLATION

2.1 Tools, resources and materials .............................................................3

2.2 Preparing the installation .................................................................3

2.3Mounting situations: Wall, ceiling and rafter ...................................................4

2.4Mounting height and position of the brackets.................................................. .5

2.5Mounting technique .................................................................. 6-7

2.6Fastening the awning ................................................................. . .7

3. INITIAL OPERATION

3.1 With motor drive .......................................................................

3.2 Adjust inclination of the awning ............................................................9

3.3 Completing the installation / Transfer to the client ..............................................10

4. DISMOUNTING . ......................................................................10

5. TROUBLESHOOTING .................................................................. 10

Page

CONTENTS

www.helioscreen.com.au | Phone 1300 766 319

Helioscreen Rubix • INSTALLATION GUIDE | 2

•Drill

• Drillbits,suitableforthedrillingsubstrateandthemountingpieces

• SW3,SW5andSW10Allenkeys

• RatchetwithSW17socket

• SW13ringorforkspanner

• Spiritlevelandstringforalignment

• Stringforalignmentofthebrackets

• Testcable,resp.adjustmentset(forinitialoperation)

2. inStallation

2.1 toolS and materialS

Beforecommencingtheinstallation,pleaseverifywhetherthetypeandnumberofbracketsisinconformitywiththeorderand

whether the base material is the same as that stated on your order.

Ifsignificantdifferencesmakethesafeinstallationoftheawningseemdoubtful,pleaseconsultthemanufacturerofthesystem

and a mounting/installation specialist.

Iftheinformationaboveisnotobserved,theawningsystemmayfalldownandputthehealthofpersonsatrisk!

Transporttheawningtothesiteofinstallation,ensuringthattheorientationiscorrect.

Securetheinstallationzone(thesecuredzonemustbeatleastequivalenttothesizeofthefullydeployedawning). If

theawningishoistedtohigherinstallationpositionswithropes,theawningmustberemovedfromthepackaging.

Whenattachingthehoistingropes,ensurethattheawningisproperlyfastened,butnotdamaged.Hoisttheawning

exclusivelyinhorizontalpositionandevenly.

2.2 PreParing the inStallation

1.2 general Safety information

TheHELIOSCREEN RUBIXawninghasbeendesignedandmanufacturedinconformitywithDINEN13561.

However,whentheawningismountedoroperated,thepersonsinvolvedintherespectiveactivitymaybeputatrisk

ifthe relevant instructions are not observed.

Onlyqualifiedanddulyspecializedcompaniesortrainedspecialistpersonnelmaybepermittedtomounttheawning.

Alwaysobservetheinformationandnotesintheinstallationandoperationinstructions.

Afailuretoobservetherelevantinformationwillrenderthemanufacturer’sliabilitynullandvoid.

Thesafety-at-workandaccidentpreventionregulationsspecifictoeachcountrymustbecompliedwith.Inparticular,a

personperformingspecialworkatheightmustbesuitablysecured.

Thenotesontheproductanditspackagingmustbeobserved.

www.helioscreen.com.au | Phone 1300 766 319

Helioscreen Rubix • INSTALLATION GUIDE | 3

















 













wall mounting

Ceiling mounting

2.3mounting SituationS

















 













www.helioscreen.com.au | Phone 1300 766 319

Helioscreen Rubix • INSTALLATION GUIDE | 4

PoSition of the braCketS:

Onthebackofthecasingoftheawning,therearestickerswiththedefinitionofthebracketpositions.

Markthepositionalpointsonthebasematerial.

Trytofindtheidealpositionforthebracketcenter.

Donotgobeyondthelimitareasofthebracketcenters,thiscouldleadtodamagestooramalfunctionoftheawning.

determination of the mounting height for wall-mounted awningS:

Themountingheightdependsontheextendedlengthandinclinationoftheawning.Pleaserefertothedrawingontherightfor

basicorientation.Alwaysensurethatthereissufficientheadroom.

2.4mounting height and PoSition of the braCketS

mounting height:

Theawningcanproducecrushingforcesandshearstresses,forinstancebetweenthedropprofileandthecasing,on

thearticulatedarmsandatthepointwheredifferentprofilesmeet.Toprotecthumansafety,themountingheightmustbe

atleast2.50m.Ifthesituationrequiresamountingheightlessthanthestatedminimumheight,theawningmustbeope-

rated exclusively with a switch mounted at a location from where the moving parts can be observed.

Theawningisappropriatetoalimitedextentasameansofprotectionagainstrain.Inanyevent,theminimuminclinati-

onforsuchapplicationsmustbe14°.Thelimitationsoftheusearedefinedintherelevantoperatinginstructions.

www.helioscreen.com.au | Phone 1300 766 319

Helioscreen Rubix • INSTALLATION GUIDE | 5

2.5mounting teChnique

drilling holeSfor the braCketS:

Transferthedrillingoutlinesofthebracketstothedeterminedbra-

cketpositions.

Whenmountingtheawnings,selecttheappropriatedrill

bit for the respective base material and mounting

method.

mounting on thermally inSulated faCadeS:

Insulatingplasterandfullmulti-layerthermalinsulationarenotpres-

surestable.Therefore,itisnecessarytousebackingfortheentire

surface,oratleastdistancersfortheareaaroundthescrews.The

accompanyingfigureexplainsapossiblevariant:

braCket mounting:

Looselyfastenallbracketsandachievetruealignment.Evenoutirregularitiesofthebasebyusingsuitablespacers.Thentighten

allscrewsandcheckthatbracketsarefirmlyattached.

Reducetheprojectionofinstallationboltstoaminimum(max.11mm),

otherwiseitisimpossibletohookintheawning.

Insulationprotectiontakenout

Distancetube

www.helioscreen.com.au | Phone 1300 766 319

Helioscreen Rubix • INSTALLATION GUIDE | 6

2.6fitting the awning

Ensurethatsufficientpersonnelisavailabletolifttheawning.

Theawningweighsupto75kg;theweightsare

definedonthepackaging.

Hookawningwiththebaseprofileintothebracketprofile.Ensurethattheposition

ofthebracketscoincideswiththemarkedpositionsofthecentralsupports.

Iftheassyishookedincorrectlyandifthelengthoftheinstallationboltsisright,

theawningwillstayinplace,butitmuststillbesecured.

Insertthebracketfastenersintheappropriatechannelofthebase

prole,movetotherightpositionandtightenthethreadedpinswith

SW3Allenkey.

This secures the awning and prevents it from falling down.

3. initial oPeration

Beforetheinitialoperationoftheawning,removeallobjects(e.g.ladders,toolsetc.)fromthefulltravelrange(in/out)

of the awning and from underneath the awning.

Duringthetrialoperation,ensurethatnobodyisinthisarea–thereisariskofinjuryincaseofamalfunction.

3.1 with motor driVe

Fortrialoperation,alwaysusethetestcable(noautomaticcontrolunitsetc.).Inaddition,theoperatormustbeableto

see the awning.

Ifthetestcablehasnotyetbeenconnected,connecttothecableofthedrivinggear.

Theendpositionswitchesofthemotorsarefactoryset.However,readjustmentsonlocationaccordingtothe"motor

adjustmentmanual"arepossible.

Fullyextendawningandcheckswitch-offpoint.Infullyextendedcondition,theawningisoptimallystretched.Whenwindingup

theawningforthefirsttime,checkthatthecoveringiswoundupproperlyandthatthearticulatedarmsfoldcorrectly(parallel).

Electricalinstallationworkandconnectionstothemainsmustbecarriedoutexclusivelybyalicensedelectricalcom-

pany. Electricalinstallationworkandconnectionstothemainsmustbecarriedoutexclusivelybyalicensedelectrical

company.

www.helioscreen.com.au | Phone 1300 766 319

Helioscreen Rubix • INSTALLATION GUIDE | 7

3.2 Setting the inClination of the awning

adjuStment of the CaSSette droP Profile:

• Extendtheawningbyapproximately40to50cm.

• Loosenstopnutsatthesideofthedropprofileholderswith

SW13spanner.

• Movedropprofilewithonehandintothedesired

inclination position.

• Pushdropprofiletothedesiredpositionand fixbytightening the

stop nut.

• Makethesameadjustmentontheotherside.Usethemeshpattern

on the drop bar holder for easier orientation.

• Visuallyverifywhetherthesidepartsofthehousingandthedrop

profileareinalignment.Ifnecessary,correctdropprofileagain.

• Windupawningandcheckthatthedropprofileclosesexactly.

adjuStment of the inClination of the awning:

• Halfextendtheawning.

• RemovesecuringscrewwithAllenkey5.

• LoosenthesidescrewwithAllenkey10.

• Liftarmslightlytorelievetheloadonthepivotingpartandadjust

theinclinationbyturningthescrewinthepivotingpartwithSW

10Allenkey.

to lower the awning, turn CloCkwiSe

to raiSe the awning, turn Counter-CloCkwiSe

Intheeventofasignificantchangeoftheinclinationsetting(more

than10°),thearmsmustbeadjustedalternately.

Ensurethatthepivotingpartrestswithitssurfaceonthe

headofthecountersunkscrew.

• Followingtheadjustmentoftheinclination,firmlytightentheside

screwandinsertthesecuringscrewwiththewasher,thenalso

tighten firmly.

Loosenscrewslightly.

Stopnut

Mesh pattern

www.helioscreen.com.au | Phone 1300 766 319

Helioscreen Rubix • INSTALLATION GUIDE | 8

5. TROUBLESHOOTING

3.3 COMPLETING THE INSTALLATION / TRANSFER TO THE CLIENT

• Clearsite.Removepackagingmaterialsfromsiteanddisposeaccordingtolocalregulations.

• Handovertoclientallinstructionsconcerningtheinstallationandoperationoftheawningaswellastheinstructionsforthe

electrical connections of control units and switches.

Give client comprehensive instructions about the operation of the awning. Failure to observe the instructions and incorrect

operation can result in damages to the awning and accidents.

Notifyclientofthewindresistanceclassoftheawning.

4. DISMOUNTING

Ensurethattheareaaroundtheawningisfreeofunauthorizedpersonnel.Shutoffpowertomotor-drivenawningsand

takestepstoensuretheycannotbeswitchedonagain.

• Dismounttheawningexclusivelyinretractedcondition.

• Dismountingoftheawningisthereverseofthemountingprocedure.

TYPE OF FAULT CAUSE REMEDY

Motor drive does not work Nopower Checkconnection(specializedcompany)

Motor drive not correctly connected Checkconnection(specializedcompany)

Thermal protection of the motor drive activated Waitfor15-20mins,thenoperateagain

Remotecontrolbatteriesempty Checklightsignalonsendingunit,replace

batteries

Higher-levelcontrolunitpreventsmanual

operation

Waituntilhigher-levelsignalisnotactivated

any more.

System does not extend or retract fully Endpositionsofthemotordrivechanged,or

incorrect end position setting

Resetorre-programendpositions(seemotor

adjustmentmanual)

Awning makes grating noises Insufﬁcient lubrication Sprayarmarticulationbearingwithasuitable

lubricant(e.g.Teonspray)

Drop proﬁle does not close exactly Adjustmentofthedropproleinaccurate AdjustdropproleaccordingtoItem3.2

System does not close on one side Fabric unevenly sewn Linecoveringonthissidebyapplyingfabric

tape to cloth roller

www.helioscreen.com.au | Phone 1300 766 319

Helioscreen Rubix • INSTALLATION GUIDE | 9

Indice

Altri manuali Helioscreen Accessori

Helioscreen

Helioscreen Neo Manuale utente

Helioscreen

Helioscreen Helioshade Full Cassette Guida all'installazione

Helioscreen

Helioscreen Vario-Pergola Manuale utente

Manuali Accessori popolari di altre marche

Hillco

Hillco 2810 Manuale utente

Siemens

Siemens QSA2700D Manuale dell'operatore

Contours

Contours ZY024 Manuale utente

Saivod

Saivod VS621 Manuale utente

Virtuox

Virtuox VirtuCLEAN 2.0 Manuale utente

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuale utente

Z-Wave

Z-Wave HSD-200Z Manuale utente

turck

turck FMX-IM-2UPLI63FX Manuale utente

Decagon Devices

Decagon Devices 10HS Manuale utente

UPPAbaby

UPPAbaby Cup Holder Manuale utente

Elko

Elko SmartSensor Leakage Wireless Manuale utente

Grizzly

Grizzly H8371 Manuale utente

Panasonic

Panasonic HG-T Series Manuale utente

IFM Electronic

IFM Electronic Efector 250 Series Guida di riferimento

DigiDesign

DigiDesign 888/24 I/O Manuale utente

PROZIS

PROZIS QUAY Manuale utente

patagonia

patagonia PSI Vest Manuale utente

SFC Energy

SFC Energy EFOY GO! Manuale utente