Hello Kitty KT3097BK Manuale utente
WARNING:
This is an electric appliance – not a toy! To avoid
risk of fire, burns, personal injury and electric shock it should not
be played with or placed where small children can reach it. Not
appropriate for use by children 12 years of age and younger.
90 DAY LIMITED WARRANTY AND SERVICE
VALID IN THE U.S.A ONLY
SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from defective materials or
factory workmanship for a period of 90 days from the date of original customer purchase and provided the product is
utilized within the U.S.A. This warranty is not assignable or transferable. Our obligation under this warranty is the
repair or replacement of the defective unit or any part thereof, except batteries, when it is returned to the SPECTRA
Service Department, accompanied by proof of the date of original consumer purchase, such as a duplicate copy of a
sales receipt.
You must pay all shipping charges required to ship the product to SPECTRA for warranty service. If the product is
repaired or replaced under warranty, the return charges will be at SPECTRA’s expense. There are no other express
warranties other than those stated herein.
This warranty is valid only in accordance with the conditions set forth below:
1. The warranty applies to the SPECTRA product only while:
a. It remains in the possession of the original purchaser and proof of purchase is demonstrated.
b. It has not been subjected to accident, misuse, abuse, improper service, usage outside the descriptions and
warnings covered within the user manual or non-SPECTRAapproved modifications.
c. Claims are made within the warranty period.
2. This warranty does not cover damage or equipment failure caused by electrical wiring not in compliance with
electrical codes or SPECTRA user manual specifications, or failure to provide reasonable care and necessary
maintenance as outlined in the user manual.
3. Warranty of all SPECTRA products applies to residential use only and is void when products are used in a
nonresidential environment or installed outside the United States.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. TO
OBTAIN SERVICE please remove all batteries (if any) and pack the unit carefully and send it freight prepaid to
SPECTRA at the address shown below. IF THE UNIT IS RETURNED WITHIN THE WARRANTY PERIOD shown
above, please include a proof of purchase (dated cash register receipt) so that we may establish your eligibility for
warranty service and repair of the unit without cost. Also include a note with a description explaining how the unit is
defective. A customer service representative may need to contact you regarding the status of your repair, so please
include your name, address, phone number and email address to expedite the process.
IF THE UNIT IS OUTSIDE THE WARRANTY PERIOD, please include a check for $8.00 to cover the cost of repair,
handling and return postage. All out of warranty returns must be sent prepaid.
It is recommended that you contact SPECTRA first at 1-800-777-5331 or by email at custserv@spectraintl.com for
updated information on the unit requiring service. In some cases the model you have may be discontinued, and
SPECTRA reserves the right to offer alternative options for repair or replacement.
SPECTRA MERCHANDISING INTERNATIONAL, INC.
4230 North NormandyAvenue,
Chicago, IL60634, USA.
1-800-777-5331
To register your product, visit the link below to enter your information.
http://www.spectraintl.com/wform.htm
Printed in China
LIQUID MOTION GLOW
USER MANUAL
KT3097BK
ASSEMBLY INSTRUCTIONS：
•CAREFULLY UNPACK THE UNIT FROM THE BOX.
•ASSEMBLE THE UNIT ON A FLAT AND CLEAN SURFACE.
•RECENTRE THE BULB IF NECESSARY.IT IS IMPORTANT THAT THE
LIGHT BULB IN YOUR UNIT’S BASE BE COMPLETETLY CENTRED AND
TIGHTENED.THE BULB AND SOCKET MIGHT HAVE BEEN SLIGHTLY
MOVED BURING SHIPPING.IF SO GENTLY PUSH THE SOCKET WITH
YOUR FINGERS TO RECENTER IT. MAKE SURE THAT THE UNIT IS
UNPLUGGED BEFORE TOUCHING IT.
•POSITION THE BODY (B) ON THE BASE (A) AND MAKE SURE IT IS
STEADY.
•PLACE THE CAP(C) ON TOP OF THE BOTTLE TO COMPLETE.
•PLUG IN AND TURN THE SWITCH ON.
•USE ONLY 20 WATT TYPE R39 FROSTED BULB FOR REPLACEMENT.
VARIANCE IN BULB SIZE OR WATTAGE WILL RESULT
UNSATISFACTORY OPERATION, FIRE OR BREAKAGE OF THE GLASS
VESSEL.
CARE AND OPERATION:
•THE UNIT IS DESIGNED TO OPERATE IN AN AVERAGE ROOM TEMPERATURE 20-25 C
(68-77 F).MAKE SURE THE UNIT IS AT ROOM TEMPERATURE BEFORE STARTING.
•INITIAL WARM-UP OF THE UNIT WILL TAKE 3 TO 5 HOURS.SUBSEQUENT WARM-UPS WILL TAKE
LESS TIME DEPENDING ON THE ROOM TEMPERATURE.THE UNIT WILL FUNCTION BEST IF IT IS
OPERATED NO LONGER THAN 10 HOURS AT A TIME.THE UNIT’S FUNCTION WILL BE ACHIEVED
FULLY AFTER THE UNIT HAS BEEN USED 5 OR 6 TIMES.
•THE UNIT OPERATES BEST AT ROOM TEMPERATURES BETWEEN 20-25 C (68-77 F). DO NOT
PLACE IT NEAR SOURCES OF HEAT OR COLD SUCH AS HEAT AND AIR CONDITIONING VENTS.
•DO NOT ADD ANY FLUIDS OR SOLIDS TO YOUR UNIT.THE AIR SPACE AT THE TOP OF THE
VESSEL HAS BEEN PROVIDED TO ALLOW FOR EXPANSION.
•DO NOT OPERATE THE UNIT ON ANY WARM OR HOT SURFACES.OPERATE THE UNIT ONLY ON ROOM
TEMPERATURE SURFACES.
•OPERATION OR STORAGE OF THE UNIT IN DIRECT SUNLIGHT WILL CAUSE COLORS TO FADE.
•ALMAYS OPERATE THE UNIT ON A FIRM STATIONARY SURFACE. THE UNIT OPERATES AT A VERY
WARM TEMPERATURE AND THE VESSEL IS MADE OF GLASS. KEEP THE UNIT OUT OF REACH OF
SMALL CHILDREN AND PETS.
•THE COLOR HUE OF THE＂WAX＂WILL MELLOW AFTER ABOUT 10-20 HOURS OF CONTINOUS
OPERATION.
•DURING THE INITIAL WARM-UP OF THE UNIT, THE HEAT COIL IN THE BASE MAY TEND TO
STAND ON END OR FLOAT TO THE TOP OF THE VESSEL.IF THIS HAPPENS.KEEP YOUR UNIT
OPERATION FOR 4 OR MORE HOURS TO ALLOW THE＂WAX＂MATERIAL TO BECOME COMPLETELY
MELTED.THE COIL SHOULD THEN AUTOMATICALLY DROP DOWN TO IT’S CORRECT POSITION IN
THE BASE OF THE VESSEL.IF THE COIL DOES NOT DROP DOWN, TWIRL THE VESSEL GENTLY IN
THE BASE AND THE COIL WILL DROP.
•USE ONLY FINE GLASS CLEANER AND A SOFT CLOTH TO CLEAN THE SURFACE, ALWAYS UNPLUG
IT BEFORE CLEANING.
USE ONLY R39, 20W, APPLIANCE BULB FOR REPLACEMENT BULB.VARIANCE IN BULB SIZE OR
WATTAGE WILL RESULT UNSATISFACTORY OPERATION, FIRE OR BREAKAGE OF THE GLASS VASE.
THE VESSEL AND BASE WILL BE WARM TO THE TOUCH IN OPERATION AND WHILE AFTER THE
UNIT HAS BEEN TURNED OFF/UNPLUGGED.
KEEP OUT OF REACH OF CHILDREN AND PETS.
ALWAYS OPERATE THE UNIT ON A FIRM STATIONARY SURFACE THAT IS AT ROOM
TEMPERATURE.
DO NOT OPERATE THE UNIT ON ANY WARM OR HOT SURFACES. OPERATE ONLY AT ROOM
TEMPERATURE.
WHEN THE UNIT IS IN OPERATION, BE SURE NOT TO MOVE OR SHAKE IT IN ORDER TO AVOID
LIQUID BECOMING MURKY AND PERMANENTLY DAMAGE.
THE UNIT SHOULD NEVER BE HEATED UP BY ANY OTHER MEANS NOR SHOULD IT BE COOLED
DOWN ARTIFICIALLY. NOT BE USED WHEN THE VASE IS CRACKED OR DAMAGED.
THE SPACE ON THE TOP OF THE VASE IS PROVIDED FOR EXPANSION.DO NOT BREAK THE SEAL
OF THE CAP TO FILL IT WITH LIQUID OR SOLID. BREAKING THE SEAL WILL VOID YOUR
WARRANTY AND RUIN THE PRODUCT.
IF THE EXTERNAL FLEXIBLE CABLE OR CORD OF THE UNIT IS DAMAGED, IT SHALL BE
EXCLUSIVELY REPLACED BY THE MANUFACTURER OR SERVICE AGENT OR A SIMILAR QUALIFIED
PERSON IN ORDER TO AVOID A HAZARD.
Altri manuali Hello Kitty Lanterna
