Heltun HE-FT01 Manuale utente
QUICK START GUIDE
Fan Coil Thermostat HE-FT01
Founder of HELTUN
Ashot Mashuryan
We are inspired by your imagination of
home comfort when making it into reality.
Welcome to the club of bizarre dream makers.
5
11
17
23
29
35
41
47
53
59
65
71
77
83
English .................................................................................................................................
Русский ..............................................................................................................................
Français ..............................................................................................................................
Deutsch .............................................................................................................................
Nederlands ........................................................................................................................
Italiano ..............................................................................................................................
Español ..............................................................................................................................
Polskie ................................................................................................................................
Hrvatski ..............................................................................................................................
Magyar ...............................................................................................................................
Slovenský ..........................................................................................................................
Lietuvis ..............................................................................................................................
Svenska ..............................................................................................................................
Română ..............................................................................................................................
5 6
7 8
9 10
11 12
OVERVIEW
The HELTUN HE-FT01 Advanced Programmable Thermostat is elegantly designed and ‘Impossibly
Smart’ providing wireless over-the-Internet control of your home’s fan coil heating/cooling system.
The HE-FT01 is‘Impossibly Thin’on the wall yet packed with features to help you save energy while
providing the ultimate in comfort and convenience.
Perfectly controls air conditioning systems
The HE-FT01 is designed to maintain constant room temperatures by using internal air temperature sensor. It controls 2-pipe or 4-pipe air
conditioning/heating systems such as: split/multi-split systems, chillers and fan coil unit systems, central air conditioning systems,
multi-zone VRF/VRV air conditioning systems, etc. The fan speed is controlled by three relay outputs. Two more relay outputs control
cooling and heating valves. The HE-FT01 has two independent inputs for relay channels which allow it to control fans and valves with
dierent power sources or to use relay outputs as dry contacts. Each relay can carry a load of up to 5 Amps.
Multiple built-in sensors
The HE-FT01 has an LCD screen, six high sensitivity capacitive touch buttons, and internal temperature sensor with compensating software
for precise temperature monitoring and control. It also has built-in humidity and illumination sensors. You can instantly access information
from all sensors on the user-friendly display.
Monitor all important information without even a touch
The at-a-glance display shows: ambient air temperature, user set point, humidity level, current operating mode, climate mode, fan speed, time,
day of the week, and status of the Z-Wave network. Display brightness adjusts to ambient light conditions automatically making it easy to read.
Highly congurable
You can select one of four operation modes (COM, TIME, ECO, OFF) with individual set points either manually or by using a Z-Wave
controller/gateway. The HE-FT01 operates in four Climate Modes: Heating & Cooling, Heating only, Cooling only, or Ventilation and has six
fan speed control modes: Low, Medium, High, Auto Medium, Auto High, & O.
Know how much energy you use
The HE-FT01 built-in Power Consumption System monitors how much energy you used during any particular day, week, or month. Just
specify the consumption of the load in watts for each relay channel and the thermostat logic will calculate total consumption relative to
the time since the output was in the‘ON’ state.
Based on the latest Z-Wave platform
The HE-FT01 integrates a Z-Wave Plus v2 700 platform module allowing it to be used with Z-Wave home automation systems.The HE-FT01
supports Z-Wave‘S0’and‘S2’security protocols, SmartStart technology, and can be connected (“associated”) to other Z-Wave devices, such
as relays, switchers, etc.
5
TECHNICAL SPECIFICATIONS
Declaration of Conformity
Hereby, Heltun declares that the device is in compliance with directives:
EMC 2014/30/EU, LVD 2014/35/EU, RED 2014/53/EU, RoHS 2011/65/EU.
Front frame (on wall) dimensions: 89mm (H) х 89mm (W) х 9mm (D)
Rear electronics package dimensions: 53mm (H) х 53mm (W) х 28mm (D)
Materials: Tempered glass display/body, Flame retardant plastic
5 frame colors: White, Gloss Black, Matte Black, Silver, Chrome
6 glass colors: White, Black, Yellow, Green, Red, Blue
LCD: 73mm x 42mm (3.3 inch), black with white segments
6 capacitive-touch buttons
Operating temperature: 0°С to +50°С
Operating humidity: 10% to 95% RH
Power supply: 85-265VAC 50Hz/60Hz or 24-48VDC
Power consumption: <1W
5 relays with resistive load up to 5A each
- 2 relays for cooling and heating valves
- 3 relays for fan speed
2 independent relay inputs (dry contact)
Relays switching with zero-cross technology
Relays life: 100.000 switches
Internal ambient light sensor
Internal temperature sensor
- Measurement range: –30°C to +80°C
- Accuracy: ±0.5°C
Internal humidity sensor
- Measurement range: 0% to 80% RH
- Accuracy: ±3.0% RH
Software energy consumption logic
IP class: IP21
Z-Wave Plus V2 SDK: V7.11
Z-Wave 700 module: ZGM130S
Requires mounting to ush electrical junction box:
round or square type – min. depth 40mm
Placement of the HE-FT01 is of utmost importance for proper operation and must be away from sunlight and sources of direct heat. For
air temperature proper measurement, we recommend installing the HE-FT01 approximately 1.5 meters above the oor.
Remove the display unit and backplate of the HE-FT01 from the packaging.
FIRST ENSURE THE POWER IS OFF at the main circuit breaker, and then test the wires with a probe or multimeter to verify. Insert the
wires to the correct HE-FT01 terminals by inserting a small Phillips-head screwdriver into the slot beneath each terminal and unscrew
to open.
Follow diagrams on Figure 1 (or 2 or 3 or 4) and the instructions below:
• Power wires: Connect Line & Neutral wires to L & N terminals labeled “POWER”.
• Fan speed source: Connect the required power source for Fan to terminal IN-1-3.
• Valves source: Connect the required power source for Hot & Cold water valves to terminal IN-4-5.
• Fan speed wires: Connect fan speed control wires to relays output terminals OUT-1, OUT-2, OUT-3:
- OUT-1 for the Fan low speed
- OUT-2 for the Fan medium speed
- OUT-3 for the Fan high speed
• Valves wires: Connect valves control wires to relays output terminals OUT-4, OUT-5.
If you use two-valves fan coil system, follow diagram on Figure 1 or 3:
- OUT-4 for the heating valve
- OUT-5 for the cooling valve
If you use one-valve fan coil system, follow diagram on Figure 2 or 4:
Connect valve wire to both outputs OUT-4 and OUT-5.
Note: HELTUN recommends installing cord terminals (electric wire ferrules) on the ends of wires before connecting them to the
HE-FT01 outputs (various colors terminals are included).
Note: Zero-Cross technology is unavailable if the device uses DC voltage (24-48VDC).
Tighten wires using Phillips screwdriver in slot beneath each wire.
Making sure the HE-FT01 backplate is oriented on the wall with the word“TOP”pointed upwards, secure the backplate to the electrical
junction box using the four provided screws (do not overtighten).
Once the backplate is secured onto the wall, assemble the HE-FT01 display unit onto the backplate by rst carefully aligning the two
top snap connectors, and then gently pushing the entire display unit until it‘snaps’into position all the way around.
Next, switch On the main power at the circuit breaker. The HE-FT01 will start up showing the original default factory settings.
Remove the clear protective lm from the display unit by pulling on the top right-hand tab.
1.
2.
3.
4.
5.
6.
INSTALLATION
The HELTUN HE-FT01 thermostat must be installed by a licensed electrician in a manner that conforms to local regulations and
building codes. Provide these instructions to the licensed electrician who is installing the HE-FT01.
WARNING: Electrical power must be switched o during installation.
SmartStart
SmartStart-enabled products can be added to a Z-Wave network by scanning the Z-Wave QR Code shown on the product with
gateways/controllers that provide for SmartStart inclusion. In this case, no further action will be required and the SmartStart product will
be added automatically within ten minutes of being turned on in the vicinity of a network.
To add the HE-FT01 to the Z-Wave network using SmartStart:
Note: The device security code (DSK) and SmartStart QR code are printed on the HE-FT01 back panel plus on the included Security Card
(see Figures 9 & 10).
Z-WAVE NETWORK
The HE-FT01 may be operated in any Z-Wave network with other Z-Wave certied devices from other manufacturers. The HELTUN HE-FT01
will act as a ‘repeater’ for other devices regardless of manufacturer or brand to increase the reliability of the overall network.
Frequency Region
The Parameter 1 (“ Eg”) allows you to manually change the Z-Wave frequency which is mandated in your geographical region.
Modication is possible only while the HE-FT01 is in a ‘Non-Included State.’ While in an ‘Included State’, the Antenna icon will be
shown at the bottom right corner of the LCD screen and modication of this Parameter will be disabled.To navigate through the dierent
values, use the Plus (+) and Minus (–) buttons. After the Frequency Region has been selected, hold the Clock button to save the
Parameter value and reboot the device for the new settings to take eect.
Security
S0, S2 unauthorized, and S2 authorized Inclusion Modes are supported. If you use the S2 authorized Inclusion Mode the security key
should be used during the inclusion process. The Security Key is printed on a card located with this quick start guide and also on the
HE-FT01 backplate (see Figures 9 & 10).
Note: Be sure to save this key. Without the key, it is impossible to perform an Inclusion in S2 authorized mode.
1.
2.
3.
To disassemble, ENSURE POWER IS SWITCHED OFF at the main circuit breaker AND THE LCD SCREEN IS BLANK.
To remove the HE-FT01 display unit grasp rmly at the bottom and pull backwards while tilting outwards until all tabs disconnect.
Remove screws from backplate and disconnect the wires by inserting a small Phillips-head screwdriver into the slot beneath each wire
and unscrewing to release.
DISASSEMBLY
1.
2.
3.
4.
5.
Set the main controller in Security S2 Authenticated“Add Mode”.
Input the thermostat DSK to the controller (or scan the QR code).
Power on the device.
Wait for the adding process to complete.
Successful adding will be conrmed by displaying the Antenna with signal strength bars icon in the bottom right corner of
the main screen.
Altri manuali per HE-FT01
2
Indice
Lingue:
Altri manuali Heltun Termostato
Heltun
Heltun HE-ZW-THERM-FL1 Manuale utente
Heltun
Heltun HE-ZW-THERM-FL2 Manuale utente
Heltun
Heltun HE-FT01 Manuale utente
Heltun
Heltun HE-HT01 Manuale utente
Heltun
Heltun HE-HT01 Manuale utente
Heltun
Heltun HE-HT01 Manuale utente
Heltun
Heltun HE-FT01 Manuale utente
Heltun
Heltun HE-ZW-THERM-FC1 Manuale utente
Heltun
Heltun HE-HT01 Manuale utente
