6
5) Press key M+/SAVE to save after changing and return to parameters choosing. While
Press key ZERO/ESC to return without saving.
6) Press key ZERO/ESC again to return to weighing mode.
Note: In the parameter setting mode, press the numeric key to choose the parameter
directly.
5-2 Parameters
1) SET00 internal code checking
2) SET01 backlight modes shifting
Options are On, OFF, and AUTO
= Backlight
= No backlight
=Auto-on after getting a stable weigh data or any key is pressed. But auto off after N
seconds (N=2s, 5s, 10s, 20s, ever) with no action.
(ever=the backlight lasts forever with more than 9d placed on the pan) when it is stable.
3) SET02 current using units setting (for weighing window and unit weight window)
options are : kg kg，kg g，g g，lb lb
E.g. When Kg, G is selected, means weighing window current using unit is kg and unit
weight window current using unit is g
How to set current using units?
When parameter SET02 UNIT is selected, press SMPL to choose the desired unit,
press M+/SAVE to save the setting , then press
e
/MR or TARE/
f
to advance to next
parameter setting.
4) SET03 zero range setting: d0, d1, d2, d3, d4, d5.
d0 (one division) , d1 (2 divisions), d2 (3 divisions), d3 (4 divisions), d4 (5 divisions) and
d5 (6 divisions)
5) SET04 whether to save the upper & lower limit of quantity checking: on, off
OFF = previously set quantity checking values are not retained when the unit is turned on.
ON = previously set quantity checking values are retained when the unit is turned on.
6) SET05 stable weight checking setting: on, off
On: it starts checking weight when the weight and quantity are within the checking range
