HeroSpeed PLC KITS Manuale utente
PLC KITS
Quick Start Guide
Please read the Quick Start Guide carefully before using the product and keep it.
Related tools and documents of products, please download from
www.herospeed.net.
Statement
Thank you for purchasing our company’s products, any questions&assistance you need, welcome to
contact us at any time.
This user manual is suitable for PLC NVR Kits( Power Line Communication NVR & Power Line
Communication camera). It will be updated according to product’s updating, new version will be not
noticed specifically.
Safety Precautions
1. Please modify default password promptly after the equipment is installed, to avoid being stolen.
2. Please do not place and install the equipment in direct sunlight or near heating equipment.
3. Please do not install the equipment in wet, dusty or soot-burning places.
4. Please keep the equipment horizontally installed or installed in a stable place,avoid the equipment
falling down.
5. Please do not drop and splash liquid on the equipment and ensure no objects filled with liquid on the
equipment and prevent liquid from leaking.
6.Please install the equipment in a well-ventilated place and do not block the vents of the equipment.
7. Please use the equipment within rated input/output range only.
8. Please do not disassemble the equipment without notifying supplier.
9. Please transport, use and reserve the equipment in permissible range of humidity and temperature.
Disclaimer
Please pay special attention to the following exclusions or restrictions:
1. If the product is terminated for any of the following reasons, our company shall not be liable for any
personal injury or property damage to you or third parties:
A. The installation or use of equipment is not strictly in accordance with the requirements;
B. State or public interest;
C. Majeure;
D.Your own or third-party reasons, including but not limited to the use of third-party products, software,
components and so on.
2. Our company does not guarantee the equipment for special purposes or use in any express or
implied way. This equipment shall not be used for medical/safety equipment or other products which
can cause life hazards and personal injury applications or dangerous uses of weapons of mass
destruction, biological and chemical weapons, nuclear explosion and any unsafe use of nuclear energy
or contrary to humanitarian purposes. Any loss or liability arising from such use shall be borne by you.
3. This equipment can perceive specific illegal invasion in correct installation and use, but it can not
avoid accidents or personal injury and property loss caused by this. In daily life, please be vigilant and
strengthen the awareness of safety precautions.
4. We are not liable for any consequential, accidental, special or punitive damages, requests, property
losses, data losses and documents losses. In the maximum extent permitted by law, our liability for
compensation shall not exceed the amount paid by you when purchasing this product.
Products Appearance Description
Ethenet、 Audio Output、Audio Input、VGA、HD、USB、DC12V
PLC NVR Kits Quick Installation Guide
PLC（Power Line Communication）,it is the network signal coupled to the power transmission line,no
need cable,Plug and play,no need any setting,easy installation.
Step1: Installation Preparation
Install HDD. Make sure all the power are cut before intalling.
Installation tool: Cross screwdriver. (Notes: Please use professional hard disk recommended by supplier.)
Notes: Images for instruction use only, the final goods are subjected to the real object.
Notes: Images for instruction use only, the final goods are subjected to the real object.
1. Loosen the screws on the base plate and remove
the upper cover.
2. Align the screw holes on the hard disk with the screw
holes on the base plate and tighten the hard disk to the
bottom with screws.
3. Plug in the hard drive cable and power cable.
USB
HD Port
VGA
Audio Input Audio Input
Audio Output
Audio Output
Ethenet Ethenet
USB
DC 12V DC 12VVGA
HD Port
4. Align the cover against the base and gently close it.
Tighten the top cover to the floor with screws.
Keep the connected PLC camera and PLC recorder at the same ammeter,then we can operate it.The
default NVR address http://192.168.1.88,refer to the below connection.
Please pay special attention when installing:
1. With the same meter,no more than three air switch.
2. PLC camera power supply for the 1A，the label is black;PLC recorder power supply for the 2A,the
label is silver,as shown below.
Notes: Images for instruction use only, the final goods are subjected to the real object.
Make sure the PLC KITS work normally：NVR connection the monitor,and all the devices are in
power.When the monitor display the videos of all the IPC,it shows the devices running well.
The suggested installtion scope;Factory,warehouse or the extensive space.
Note:Make sure the power supply in the regular voltage(100V～240V),it can not be under or exceed the
scope of the power supply,or the PLC kits will be damaged.
Notes: Images for instruction use only, the final goods are subjected to the real object.
Notes: Images for instruction use only, the final goods are subjected to the real object.
PLC Camera
PLC NVR
HD /VGA
Multiple display
monitoring equipment
Internet
picture transmission
Internet
System login
Start up the NVR,right click the desktop and enter the user login interface.
Input the user name and password.
System default user name : “ admin” password : “12345”.
Preview
Enter preview interface after device start up.Preview interface include date and
time of system,and channel name.Login system,double left click to switch
between full screen and multi-screen.
1. Enter menu mode
Login system,right click to popup shortcut menu.
Left click [Menu],enter the main menu interface.
Left click [Playback], enter playback operation interface.
Left click [Record], enter record setting operation interface.
2. Exit menu mode
Right click to exit menu mode.
In the menu mode, right click to return to the previous menu (also for other
menus).
Menu basic operating instructions
Shortcut menu introduction
Click the right mouse button pop-up shortcut menu, shortcut menu consists of the
following three parts:
Preview mode: Select the preview mode in the menu bar you like.
Shortcut menu mode: In the menu bar wheel tour, video settings, add equipment, video playback,
PTZ settings and NVR image color, you can directly enter the appropriate menu.
Main menu : Click to enter after the [Playback], [Export], [HDD], [Record ] , [Camera],
[Configuration], [Maintenance], [Shutdown].
Record
1. HDD formatting, to ensure that the hard disk has been detected and work normally (you can
check status of HDD from menu “HDD”-”General”).
3. Motion Detection Seetting,Enable “Motion”to activate motion recording,motion sections have no
more than 6 times each day. If the setting of manual record and motion record are overlapped,it can
only save the motion records while motion detection cames up.
2. In the shortcut menu, click [Record],enter the video settings interface, or in the main menu,click the
left mouse button [Record], to enter the video settings interface, NVR default all time ordinary Video.
Playback
Enter “Playback” interface by clicking “Playback” from shortcut or main menu, select channels
and search the record files and playback what you want.
(Video playback interface)
Live View
1. Left click 【1-Win】/【4-Win】/【8-Win】/【9-Win】in the menu, it is available to add single channel
or multi-channels on one screen.
2. PLC kits have matched Add Camera by default.Keep all the devices at the same ammeter,power on,it
can realize the time preview when connecting the display device,if you change the defaulted IP address
of IPC,you need to re-add the remote device.
As Follow the above image,enter into the page of remote device by left-click at shortcut menu.
① Keep the NVR & IPC at the same ammeter.
② Delete it,if you have added the device.
③ Click the menu “Add”.
④ Tick all the devices you want to add.
⑤ Click “add”.
⑥ Click "cancel" to return to the interface of last.
2
4
3
56
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali HeroSpeed Sistema di sicurezza
Manuali Sistema di sicurezza popolari di altre marche
EDM
EDM Solution 6+6 Wireless-AE Manuale utente
Highway Safety Group
Highway Safety Group EA401 Manuale utente
Siren
Siren LED GSM Manuale utente
Detection Systems
Detection Systems 7090i Istruzioni per il montaggio
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manuale utente
Siemens
Siemens FDM273 Manuale utente