HESA TCN-11SDDN Manuale utente

1/36

User Manual

IP CA M E R A

TCN-11SDDN

(COD. KUNTC11SD)

DT01845HE0510R00

2/36

WARINGS

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

PRODUCT TO RAIN OR MISTURE.

DO NOT INSERT ANY METALLIC OBJECT THROUGH VENTILATION GRILLS.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION_TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THE TRADEMARKS MENTIONED IN THE MANUAL ARE LEGALLY REGISTERED

TO THEIR RESPECTIVE COMPANIES.

3/36

Content

I. PREFACE.............................................................................................................................................. 4

II. PRODUCT SPECIFICATIONS............................................................................................................. 4

III. PRODUCT INSTALLATION ................................................................................................................. 6

A. MONITOR SETTING ............................................................................................................................................6

B. HARDWARE INSTALLATION AND I/O PIN ASSIGNMENT ....................................................................................7

C. IP ASSIGNMENT .................................................................................................................................................8

D. INSTALL ACTIVEX CONTROL:..........................................................................................................................10

IV. LIVE VIDEO ........................................................................................................................................ 12

V. CONFIGURATION .............................................................................................................................. 14

A. SYSTEM............................................................................................................................................................15

B. NETWORK ........................................................................................................................................................18

C. A/V SETTING ...................................................................................................................................................24

D. EVENT LIST......................................................................................................................................................30

VI. NETWORK CONFIGURATION.......................................................................................................... 33

VII. FACTORY DEFAULT .......................................................................................................................... 35

VIII. PACKAGE CONTENTS ..................................................................................................................... 35

APPENDIX I ................................................................................................................................................. 35

4/36

I. Preface

This is a professional CCD IP camera with the web server built in. User can view

real-time video via IE browser. It supports MPEG-4 & JPEG video compression

which provides smooth and high video quality. The video can be stored in the SD

card and playback remotely.

With user friendly interface, it is an easy-to-use IP camera which is designed for

security application.

II.Product Specifications

True Day/Night IR Cut Filter

MPEG4/JPEG compression

Supports SD card for local recording

2-way audio

Support Cell phone/PDA

Online firmware upgrade

Compatible with Microsoft Windows Media Player

Specifications

Hardware

CPU ARM 9 ,32 bit RISC

SDRAM 64MB

Flash 8MB

Image sensor 1/3” CCD

Sensitivity Hi-Res at 0.1 Lux, Mid-Res at 0.05 Lux

Lens Changeable Yes, CS Mount

Support DC IRIS Yes

I/O 2 in/ 2out

RS-485 Yes

Video Out 1

Microphone Built-in

Audio Out 1

Power Consumption LAN_DC 12V, 450mA; WLAN_DC 12V,

550mA

Dimensions (W_H_D) 58 x 65 x 131.5 mm

Network

Ethernet 10/ 100 Base-T

5/36

Network Protocol HTTP, TCP/ IP, SMTP, FTP, PPPoE, DHCP,

DDNS, NTP

Wireless (Optional)

Wireless 802.11b/g

WEP 64/ 128 bit

System

NTSC_720x480, 704x480,352x240, 176x120

Video Resolution PAL_720x576, 704x576,352x288, 176x144

Video adjust Brightness, Contrast, Saturation, Hue

CCD setting AES, BLC, AGC, Day/ Night(Auto)

Image snapshot Yes

Full screen monitoring Yes

Compression format MPEG-4/ JPEG

Video bitrate adjust CBR, VBR

Motion Detection Yes, 3 different areas

Triggered action Mail, FTP, Save to SD card

Pre/ Post alarm Yes, configurable

Security Password protection

Firmware upgrade HTTP mode, can be upgraded remotely

Simultaneous

connection

Up to 10

Audio Yes, 2-way

SD card management

Recording trigger Motion Detection, IP check, Network break

down (wire only)

Video format AVI, JPEG

Video playback Yes

Delete files Yes

Web browsing requirement

OS Windows 2000, XP, 2003, IE 6.0 or above

Hardware Suggested Intel-C 2.0G, RAM_512MB, Graphic

card_64MB

Minimum Intel-C 1.6G, RAM_256MB, Graphic

card_32MB

6/36

III. Product Installation

A. Monitor Setting

i. Right-Click on the desktop. Select “ Properties”

ii. Change color quality to highest (32bit).

7/36

B. Hardware Installation and I/O Pin

Assignment

i. Connect power adaptor

ii. Connect IP Cam to PC or network with Ethernet cable

iii. Set up the network configurations according to the network

environment. For further explanation, please refer to chapter VI,

“Network Configuration for IP CAMERA”.

iv. I/O Pin Assignment: Please refer to following figure.

8/36

C. IP Assignment

i. Use the software, “IP Installer” to assign the IP address of IP CAMERA.

The software is in the attached software CD.

ii. IP installer supports two languages

a. IPInstallerCht.exe_Chinese version

b. IPInstallerEng.exe_English version

iii. There are 3 kinds of IP configuration.

a. Fixed IP (Public IP or Virtual IP)

b. DHCP (Dynamic IP)

c. Dial-up (PPPoE)

iv. Execute IP Installer

v. For Windows XP SP2 user, it may popup the following message box.

Please click “Unblock”.

vi. IP Installer configuration:

vii. IP Installer will search all IP Cameras connected on Lan. The user can

click “Search Device” to search again.

viii. Click one of the IP Camera listed on the left side. The network

configuration of this IP camera will show on the right side. You may

change the “name” of the IP Camera to your preference (eg: Office,

warehouse). Change the parameter and click “Submit” then click “OK”.

It will apply the change and reboot the Device.

9/36

ix. Please make sure the subnet of PC IP address and IP CAM IP address

are the same.

The same Subnet:

IP CAM IP address: 192.168.1.200

PC IP address: 192.168.1.100

Different Subnets:

IP CAM IP address: 192.168.2.200

PC IP address: 192.168.1.100

To Change PC IP address:

Control PanelNetwork ConnectionsLocal Area Connection

PropertiesInternet Protocol (TCP/IP) Properties

Please make sure your IP Camera and PC have the same Subnet. If not,

please change IP Camera subnet or PC IP subnet accordingly.

x. A quick way to access remote monitoring is to left-click the mouse twice

on a selected IP Camera listed on “Device list” of IP Installer. An IE

browser will be opened.

xi. Then, please key in the default “user name: admin” and “password:

admin”.

10/36

D. Install ActiveX control:

For the first time to view the camera video via IE, it will ask you to install the

ActiveX component.

If the installation failed, please check the security setting for the IE browser.

i. IE Tools Internet Options… Security Tab Custom Level… 

Security Settings Download unsigned ActiveX controlsSelect

“Enable” or Prompt.

ii. IE Tools Internet Options… Security Tab Custom Level…

Initialize and script ActiveX controls not marked as safe Select

“Enable” or Prompt.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali HESA Telecamera di sicurezza

HESA

HESA TCN-15MIR Manuale utente

HESA

HESA TCN-20M Manuale utente

HESA

HESA SD-PTZ2W Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente