Hi-Target Qmini M series Manuale utente

Qmini M Series Industrial GIS Data Collector Manual

Qmini M Series

Industrial GIS

Data Collector Manual

Qmini M Series Industrial GIS Data Collector Manual

Handbook revision situation

Revision date

Revision number

Introduction

March 2012

Qmini M series industrial GIS data

collector instructions version 1.0

Qmini M Series Industrial GIS Data Collector Manual

Catalogue

Chapter 1 ..........................................................................................................................................4

Products overview.......................................................................................................................4

Product introduction................................................................................................................5

Product features.......................................................................................................................5

Use and the matters needing attention......................................................................................6

Chapter 2 ..........................................................................................................................................7

The introduction of Qmini M series industrial GIS data collector...........................................7

The front of Qmini M series industrial data collector ..............................................................8

The back of Qmini M series industrial data collector..............................................................9

Interfac....................................................................................................................................10

Touching pen..........................................................................................................................11

Battery ....................................................................................................................................11

Data cable...............................................................................................................................13

Belt .........................................................................................................................................13

Chapter 3 ........................................................................................................................................14

Basic operation...........................................................................................................................14

Keyboard................................................................................................................................15

3G card ..................................................................................................................................16

MicroSD card........................................................................................................................17

Power supply system ...........................................................................................................18

◊charge .................................................................................................................................19

Switch machine operation...................................................................................................20

Data obtain ..........................................................................................................................22

Application functions............................................................................................................26

Chapter 4.......................................................................................................................................27

Qmini M Series Industrial GIS Data Collector Manual

Technology parameters .........................................................................................................27

Technology parameters......................................................................................................27

Qmini M Series Industrial GIS Data Collector Manual

Preface

Manual use

Welcome to use Qmini M series industrial GIS data collector instructions。This manual

applies to Qmini M1 / Qmini M3 / Qmini MR/Qmini MT/Qmini MP series, this manual

introduces how to install、set up and use industrial GIS data collector.

Brief introduction of manual

Qmini M series industrial GIS data collector is a new GPS/GIS data collector, even if you

have used other types of industrial GIS data collector, please also carefully read the

manual before use .

Experience demanded

In order that you can use Qmini M series industrial GIS data collector well, HI-TARGET

suggests you have a certain measure knowledge, and carefully read the instruction. If you

have any questions, please refer to the official website of the Hi-Target: < http://www.hi-

target.com/ >.

Safety technical note

Note: the noticed content must be special in operation, which need your special attention, please

read carefully.

Warn: the warned content is generally very important, if not

operate as warn, it will cause the damage of the instrument, the

loss of the data, and the collapse of the system, even endanger

the security of person

Note: the mentioned content is general special operation, need your

special attention, please read

Qmini M Series Industrial GIS Data Collector Manual

Responsibility absolution

Before you use the product, you should read the introduction carefully. Hi-Target surveying

instrument Co. LTD. will not take the responsibility if you do not operate within the product

instruction。

HI-TARGET surveying instrument Co. LTD. is committed to continuously improve product

function and performance, improve the service quality, and keep the right to change the content

of the instruction without noticing in advance.

We have checked that whether the hardware and software are consistent with the content as the

prints say, but we don't rule out the possibility of bias, the picture in the instruction for reference

only, if you have a product with discrepancies, please refer to the product.

Technology and service

Hi-Target have set up the “technology and service” section in website , if you have

problems you can settle them through the "service guide" telephone 、contacting regional

technology center and headquarters division or through the "experts on the judgment

seat," "technology BBS" message, we will answer your questions as soon as possible.

Related information

You can find the instructions through the following methods:

1 Purchased products from the Hi-Target will with a CD, open the CD and you can find

the instruction;

2 Land the official website of the Hi-Target, through "downloaded zone"—" product

specifications "—" GIS product "and you can it.

Your suggestion

If you have any suggestions and opinions about the introduction, please visit the official

website of the Hi-Target, and leave massage in "technical service" —"advice and

Qmini M Series Industrial GIS Data Collector Manual

complaint" edition , your feedback will help to improve the quality of the introduction

greatly .

Qmini M Series Industrial GIS Data Collector Manual

Chapter 1

Products overview

This chapter introduces:

■Product introduction

■Product features

■Matters needing attention in use

C H A P T E R

Qmini M Series Industrial GIS Data Collector Manual

Product introduction

Qmini M series industrial GIS data collector products are equipped with complete

navigation and position function and GIS data acquisition function, with the operating

mode of physical buttons and touch screen, inputting in both Chinese and English are

supported. It is designed as industrial standard, and can be dropped from 1.5 meters high

to the cement floor without anything, equipped with IP67 level dustproof and waterproof,

it can adapt to complex work environment in the field. At the same time, the

configuration of the large capacity of lithium battery can meet the requirements of all day

work.

Qmini M series industrial GIS data collector is integrated designed, and it is equipped

with functions such as collection of GPS, embedded Windows Mobile 6.5 system, digital

camera, microphone, 3 G communications, bluetooth communication, large storage, USB

port, SD card expansion ,etc.

Product features

◊Industrial integration design, with a variety of functions

◊Can be used as the industrial standard GPS navigation

◊The built-in digital camera, which can realize image information site acquisition,

automatically realize GPS coordinates and image information matching labeling

◊The built-in microphone, it can realize voice information site collected

◊with the function of speech play

◊The built-in bluetooth , to realize the wireless data transmission

Qmini M Series Industrial GIS Data Collector Manual

◊Integrated industrial 3 G wireless communication. Realizing the communication

between management center and mobile GPS terminal, the function is applicable to

Qmini3 / Qmini3P and QminiH3 / QminiHP model.

Use and the matters needing attention

Although Qmini series industrial GIS data collector use the corrosion resistance and

impact resistance materials, but the instrument still need our careful use and maintenance,

and keep it in dry environment as far as possible. In order to improve the stability of the

data collector industrial GIS and use cycle, please avoid industrial GIS data collector

exposed to extreme environment, such as: damp, high temperature, low temperature,

corrosive gas or liquid, etc.

To ensure continuous observation of the satellite tracking and satellite signal quality,

the stations should be set over the open place as far as possible, barriers are not permitted

in more than 15 degree; To reduce the interference of electromagnetic wave to GNSS

satellite signal ,within 200 m strong electromagnetic interference is not permitted, such

as TV tower, microwave station, high voltage transmission line; To avoid or reduce the

happening of the multipath effect, stations should be far away from to the terrain which

reflect electromagnetic wave signal strongly, such as high building, sliced waters, etc.

Warning: industrial GIS data terminal in use and preservation must be

stipulated in the temperature range. Detail requirements, please refer to

chapter 4: technical parameters.

Altri manuali per Qmini M series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Hi-Target Registratore di dati

Hi-Target

Hi-Target Qmini M series Manuale utente

Hi-Target

Hi-Target Qmini Series Manuale utente

Hi-Target

Hi-Target Qbox Series Manuale utente

Hi-Target

Hi-Target iBoat BS3 Manuale utente

Hi-Target

Hi-Target HTS-420R Manuale utente

Manuali Registratore di dati popolari di altre marche

TESTO

TESTO 176 Manuale utente

HT Italia

HT Italia XL421 Manuale utente

HBM

HBM SOMAT XR CX22B-R Manuale utente

Agtrix

Agtrix 380i Manuale utente

Hobo

Hobo H8 Pro Manuale utente

Beijing ART Tech

Beijing ART Tech PCI2320 Manuale utente

Athena

Athena GET SL1 Manuale utente

Motec Systems

Motec Systems C185 Manuale utente

Beijing ART Tech

Beijing ART Tech USB2832 Manuale utente

Rotronic

Rotronic HygroLog HL20 Manuale utente

MRC

MRC DW-6092 Manuale utente

Racelogic

Racelogic VBOX LapTimer Manuale utente

Edu-Logger

Edu-Logger 900-240 Manuale utente

Elma

Elma DT173 Manuale utente

MadgeTech

MadgeTech PRTemp140 Scheda tecnica

Comet

Comet U0121M Manuale utente

pico Technology

pico Technology PT-104 Manuale utente

Soil Instruments

Soil Instruments GTecLink Manuale utente