HighPoint SSD7104F Manuale utente

1

SSD7104F

4x M.2 Port to PCIe 3.0x16 NVMe RAID Controller

Quick Installation Guide

V1.00

2

System Requirements

PC Requirements

System with a free PCIe3.0 (or 4.0) x16 slot

Windows 10, Windows Server 2016 and Windows Server 2019

Linux kernel 3.10 and later

MacOS 10.13 and later

SSD7104F Kit Content

SSD7104F Controller Card

Quick Installation Guide

3

SSD7104F Hardware

Front View

Full-length black anodized, fan-less heatsink

PCIe x16 host interface with Smart

Low-Noise Cooling Fan

4

SSD7104F Hardware Installation

Step 1. On the rear of the SSD7104F, remove the six screws that secure

the unit’s heat sink to the PCB.

After removing the screws, carefully remove the heat sink from the

SSD7104F.

Step 2. After removing the casing, carefully turn it over to view the

thermal pad. The blue film must be removed from the pad before

reinstalling the panel. This film protects the pad from damage and

foreign objects prior to installation, however, it can also prevent

the thermal pad form conducting the heat away from the NVMe

SSD's if we don't remove it.

5

Step 3. These 4 screws are used to install the NVMe SSD’s

The SSD7104F can support any M.2 form factor (2242, 2260,

2280, and 22110).

Step 4. Please remove the screws on the right side of SSD7104F

Step 5. Gently insert the SSD into the slot.

6

Note: Please make sure all disks are clean before you insert them

into the slot to avoid unexpected situations.

Step 6. Refasten the screw to secure the SSD.

Repeat Steps 4 to 6 to install the remaining SSD.

Note: Make sure the SSD’s are carefully, but securely installed into

each M.2 port. Loose connections can cause a variety of stability

and performance issues, and may ultimately result in data loss.

The following example shows four M.2 SSDs installed into Ports 1-4:

Port1

Port2

Port3

Port4

7

Step 7. Replace the heat sink after installing all SSDs

Step 8. On the rear of the SSD7104F, refasten the six screws that were

removed in step 1.

Note

：

Make sure the aluminum cover is properly aligned with the

controller board (PCB), and that it makes full contact with the thermal

pad, before refastening it to the SSD7204. If the cover is improperly

installed, the fan and thermal pad will be unable to sufficiently cool the

NVMe SSD’s and controller componentry, which may result in damage

to the SSD’s or controller hardware, performance loss, unstable I/O,

and the loss of data.

Note: Please be sure to connect NVMe before using the product to

reduce the occurrence of unnecessary errors!

Note: Install the driver in the system first and then install the board!

8

Resources

A variety of manuals, guides and FAQ’s are available for the

SSD7104F RAID controller.

In addition, we recommend visiting the Software Downloads webpage

for the latest drivers, management interfaces, and installation guides.

Software Download:

SSD7104F Driver, WebGUI, Installation Guide

https://highpoint-tech.com/USA_new/series-ssd7104-download.htm

Other Reference Information:

Motherboard & NVMe SSD Compatibility List

SSD7104F User Guide – How To Set Up & Monitor RAID Array

https://highpoint-tech.com/USA_new/series-ssd7104-resource.htm

9

Customer Support

If you encounter any problems while utilizing the SSD7104F drive, or

have any questions about this or any other HighPoint Technologies, Inc.

product, feel free to contact our Customer Support Department.

Web Support:

https://www.highpoint-tech.com/websupport/

HighPoint Technologies, Inc. websites:

https://www.highpoint-tech.com

© Copyright 2021 HighPoint Technologies, Inc. All rights reserved.

Indice

Altri manuali HighPoint Hardware per computer

HighPoint

HighPoint SSD7505 Manuale utente

HighPoint

HighPoint SSD7101A-1 Manuale utente

HighPoint

HighPoint RocketAIC 7749EM Manuale utente

HighPoint

HighPoint RocketStor 6661A-mSAS1 Manuale utente

HighPoint

HighPoint SRD Series Manuale utente

HighPoint

HighPoint RR2720A Manuale utente

HighPoint

HighPoint SRD7104FDC Manuale utente

HighPoint

HighPoint RocketRAID 1640 Manuale utente

HighPoint

HighPoint SRD Series Manuale utente

HighPoint

HighPoint SSD6202 Manuale utente

HighPoint

HighPoint Rocket 1104 Manuale utente

HighPoint

HighPoint SRD Series Manuale utente

HighPoint

HighPoint SSD7101A Manuale utente

HighPoint

HighPoint SSD7000 Series Manuale utente

HighPoint

HighPoint RocketRAID 840A Manuale utente

HighPoint

HighPoint RR2720A Manuale utente

HighPoint

HighPoint BRD Series Manuale utente

HighPoint

HighPoint RR3740 Manuale utente

HighPoint

HighPoint HS8004F Manuale utente

HighPoint

HighPoint SSD6200 Series Manuale utente

HighPoint

HighPoint RocketRAID 3622 Manuale utente

HighPoint

HighPoint SSD7110 Manuale utente

HighPoint

HighPoint SSD7202 Manuale utente

HighPoint

HighPoint Rocket 1108A Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente