HighPoint RocketU 1344D Manuale utente
RocketU 1344D
PCIe 3.0 to Quad Port USB-C 3.2 10Gb/s HBA
Quick Installation Guide
V1.02
1
Table of Contents
Introducing the HighPoint RocketU 1344D................................................2
Kit Contents............................................................................................... 2
System Requirement................................................................................. 2
Board Layout..............................................................................................3
Installing the RocketU 1344D Host Adapter..............................................4
Driver Installation...................................................................................... 6
Verifying Installation (Windows)............................................................... 7
Verifying Installation (macOS)................................................................... 8
Verifying Installation (Linux)......................................................................8
Connecting USB Storage Devices...............................................................9
FCC Part 15 Class B Radio Frequency Interference statement................ 10
Customer Support................................................................................... 11
2
Introducing the HighPoint RocketU 1344D
The RocketU 1344D is a 4-lane USB-C 3.2 10Gb/s PCIe 3.0 x4 host
adapter. It can be easily installed into any x4/x8/x16 slot, and is natively
supported by the latest versions of Windows, MacOS, and Linux
distributions.
Backwards Compatible with USB 3.2 Gen2, USB 3.2 Gen1, USB 2.0
Devices
RocketU 1344D controllers can be installed into any computing platform
with an industry-standard PCIe 3.0 or 4.0 x16 slot. The four independent
USB Type-C ports support any industry-standard USB 2.0, USB 3.2 Gen1,
USB 3.2 Gen2 device, including USB hard drives and SSD’s, cameras,
printers, capture devices and peripherals.
Kit Contents
RocketU 1344D host controller
Quick Installation Guide
Low Profile Bracket
System Requirement
PC with Windows 8.1 and later
macOS 10.9 and later
Linux 2.6.35 and later
3
Board Layout
4x USB Type-C Ports
External power port
4
Installing the RocketU 1344D Host Adapter
Note: Make sure the system is powered-off before installing the host adapter.
1. Open the system chassis and locate an unused PCI-Express
x4/x8/x16 slot.
Figure 1 - PCIe x16 slot diagram
2. Gently insert the RocketU 1344D into the PCI-Express slot, and
secure the bracket to the system chassis.
3. After installing the adapter, attach the USB device with USB cables.
4. Power up the USB Device external power supply.
Note: If the external power supply is not powered on, the USB Device
may drop offline or remain undetected, which could lead to data
loss.
5
RU1344D relies on two power sources to support four USB Devices,
power supplied through the PCIe bus, and power from the system’s
PSU via an external power cable. If the external cable is not
connected, there will be insufficient power to support all 4 USB
Devices; this may cause the USB Device to drop offline.
Note
：
The RU1344D does not require the external power cord
when used with Mac Pro 2019.
5. Close and secure the system chassis.
Connect 6 pin PCIe power cable
6
Driver Installation
Windows Platforms: The RocketU 1344D is natively supported by
Windows 8 and later (no driver installation is required).
Mac OS: The RocketU 1344D is natively supported by macOS 10.9 and
later (no driver installation is required).
Linux:The RocketU 1344D is natively supported by Linux 2.6.35 and
later (no driver installation is required).
7
Verifying Installation (Windows)
1. Open Device Manager.
2. Expand the 'Universal Serial Bus Controllers' entry.
3. If the driver is installed properly, two “ASMedia USB 3.1 eXtensible
Host Controller” and six “USB Root Hub” entry should be displayed.
Note: USB3.1 has been renamed to USB3.2, but the system display
has not been updated to USB3.2, the current display is still USB3.1.
8
Verifying Installation (macOS)
1. Access the System Information app, and click on PCI under
Hardware.
2. Verify if the driver is installed properly for the “pci1b21, 2142” USB
eXtensible Host Controller.
Verifying Installation (Linux)
1. Open terminal and enter the following command:
lspci
2. If the driver is installed properly, two “ASM2142 USB 3.1 Host
Controller” entry should be displayed.
9
Note: USB3.1 has been renamed to USB3.2, but the system display
has not been updated to USB3.2, the current display is still USB3.1.
Connecting USB Storage Devices
1. Power on the system.
2. Connect the USB device to the HighPoint RocketU HBA with a USB
cable.
3. For hard drives or enclosures, allow the device to spin up for a few
moments. Once the devices are ready, they will be recognized by
the operating system and can be accessed as needed.
Indice
Altri manuali HighPoint Scheda PCI
HighPoint
HighPoint RocketU 1244C Manuale utente
HighPoint
HighPoint RocketU 1344A Manuale utente
HighPoint
HighPoint RocketU 1144F Manuale utente
HighPoint
HighPoint Rocket 750 Manuale utente
HighPoint
HighPoint RocketRAID Quad Manuale utente
HighPoint
HighPoint RocketRAID 4520 Series Manuale utente
HighPoint
HighPoint Rocket 750 Manuale utente
HighPoint
HighPoint Rocket 710 Manuale utente
HighPoint
HighPoint RocketU 1444C Manuale utente
HighPoint
HighPoint RocketU 1388D Manuale utente
