HIK VISION DS-2DF7284-AEL Manuale utente

IR High-definition Network

Speed Dome

UD.6L0201D1167A01

HIKVision DS-2DF7284-AEL 2MP Ultra-low Temperature IR Network Speed Dome

USER MANUAL

www.cctvireland.ie

User Manual of Network Speed Dome

Thank you for purchasing our product. If there are any questions, or requests, please

do not hesitate to contact the dealer.

This manual applies to IR HD Network Speed Dome.

This manual may contain several technical or printing errors, and the content is

subject to change without notice. The updates will be added to the new version of

this manual. We will readily improve or update the products or procedures described

in the manual.

DISCLAIMER STATEMENT

“Underwriters Laboratories Inc. (“UL”) has not tested the performance or reliability

of the security or signaling aspects of this product. UL has only tested for fire, shock

or casualty hazards as outlined in UL’s Standard(s) for Safety, UL60950-1. UL

Certification does not cover the performance or reliability of the security or signaling

aspects of this product. UL MAKES NO REPRESENTATIONS, WARRANTIES OR

CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF

ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.”

0501001030822

www.cctvireland.ie

User Manual of IR Network Speed Dome

Regulatory Information

FCC Information

FCC compliance: This equipment has been tested and found to comply with the limits

for a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his

own expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may

cause undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied accessories too are

marked with "CE" and comply therefore with the applicable

harmonized European standards listed under the Low Voltage Directive

2006/95/EC, the EMC Directive 2004/108/EC, the RoHS Directive

2011/65/EU.

2012/19/EU (WEEE directive): Products marked with this symbol

cannot be disposed of as unsorted municipal waste in the European

Union. For proper recycling, return this product to your local supplier

upon the purchase of equivalent new equipment, or dispose of it at

designated collection points. For more information see: www.recyclethis.info.

2006/66/EC (battery directive): This product contains a battery that

cannot be disposed of as unsorted municipal waste in the European

Union. See the product documentation for specific battery information.

The battery is marked with this symbol, which may include lettering to

indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the

battery to your supplier or to a designated collection point. For more information see:

www.recyclethis.info.

www.cctvireland.ie

User Manual of IR Network Speed Dome

Safety Instruction

These instructions are intended to ensure that the user can use the product correctly

to avoid danger or property loss.

The precaution measure is divided into ‘Warnings’ and ‘Cautions’:

Warnings: Serious injury or death may be caused if any of these warnings are

neglected.

Cautions: Injury or equipment damage may be caused if any of these cautions are

neglected.

Warnings Follow these safeguards to

prevent serious injury or death.

Cautions Follow these precautions to

prevent potential injury or material

damage.

Warnings:

Please adopt the power adapter which can meet the safety extra low voltage

(SELV) standard. And source with 24VAC10% or 12VDC10% (depending on

models) according to the IEC60950-1 and Limited Power Source standard. The

power consumption cannot be less than the required value.

Do not connect several devices to one power adapter as an adapter overload may

cause over-heating and can be a fire hazard.

When the product is installed on a wall or ceiling, the device should be firmly

fixed.

To reduce the risk of fire or electrical shock, do not expose the indoor used

product to rain or moisture.

This installation should be made by a qualified service person and should

conform to all the local codes.

Please install blackouts equipment into the power supply circuit for convenient

supply interruption.

If the product does not work properly, please contact your dealer or the nearest

service center. Never attempt to disassemble the product yourself. (We shall not

assume any responsibility for problems caused by unauthorized repair or

maintenance.)

www.cctvireland.ie

User Manual of IR Network Speed Dome

Cautions:

Make sure the power supply voltage is correct before using the product.

Do not drop the product or subject it to physical shock. Do not install the product

on vibratory surface or places.

Do not expose it to high electromagnetic radiating environment.

Do not aim the lens at the strong light such as sun or incandescent lamp. The

strong light can cause fatal damage to the product.

The sensor may be burned out by a laser beam, so when any laser equipment is

being used, make sure that the surface of the sensor not be exposed to the laser

beam.

Do not place the product in extremely hot, cold temperatures (please refer to the

product specification for the device operating temperature), dusty or damp

environment.

To avoid heat accumulation, good ventilation is required for a proper operating

environment.

While shipping, the product should be packed in its original packing.

Please use the provided glove when open up the product cover. Do not touch the

product cover with fingers directly, because the acidic sweat of the fingers may

erode the surface coating of the product cover.

Please use a soft and dry cloth when clean inside and outside surfaces of the

product cover. Do not use alkaline detergents.

Improper use or replacement of the battery may result in hazard of explosion.

Please use the manufacturer recommended battery type.

www.cctvireland.ie

User Manual of IR Network Speed Dome

Table of Contents

Chapter 1 Overview....................................................................................................................8

1.1 System Requirement...........................................................................................................8

1.2 Appearance ........................................................................................................................8

1.3 Functions............................................................................................................................8

Chapter 2 Network Connection ................................................................................................11

2.1 Setting the Network Speed Dome over the LAN ................................................................11

2.1.1 Wiring over the LAN .....................................................................................................11

2.1.2 Detecting and Changing the IP Address .........................................................................12

2.2 Setting the Network Speed Dome over the WAN...............................................................13

2.2.1 Static IP Connection......................................................................................................13

2.2.2 Dynamic IP Connection.................................................................................................14

Chapter 3 Access to the Network Speed Dome.........................................................................17

3.1 Accessing by Web Browsers ..............................................................................................17

3.2 Accessing by Client Software.............................................................................................19

Chapter 4 Live View .................................................................................................................21

4.1 Power-up Action...............................................................................................................21

4.2 Live View Page..................................................................................................................21

4.3 Starting Live View.............................................................................................................22

4.4 Recording and Capturing Pictures Manually ......................................................................24

4.5 Operating PTZ Control.......................................................................................................24

4.5.1 PTZ Control Panel .........................................................................................................25

4.5.2 Setting / Calling a Preset ...............................................................................................25

4.5.3 Setting / Calling a Patrol................................................................................................ 27

4.5.4 Setting / Calling a Pattern..............................................................................................29

4.6 Configuring Live View Parameters.....................................................................................30

Chapter 5 PTZ Configuration.....................................................................................................32

5.1 Configuring Initial Position................................................................................................32

5.2 Configuring Basic PTZ Parameters .....................................................................................33

5.3 Configuring PTZ Limit Stops...............................................................................................34

5.4 Configuring Scheduled Tasks .............................................................................................35

5.5 Configuring Park Actions...................................................................................................37

5.6 Configuring Privacy Mask..................................................................................................38

5.7 Configuring Smart Tracking ...............................................................................................39

5.8 Clearing PTZ Configurations ..............................................................................................40

Chapter 6 Speed Dome Configuration ......................................................................................41

6.1 Configuring Local Parameters............................................................................................41

6.2 Configuring Time Settings.................................................................................................42

6.3 Configuring Network Settings............................................................................................45

www.cctvireland.ie

User Manual of IR Network Speed Dome

6.3.1 Configuring TCP/IP Settings...........................................................................................45

6.3.2 Configuring Port Settings ..............................................................................................47

6.3.3 Configuring PPPoE Settings ........................................................................................... 47

6.3.4 Configuring DDNS Settings ............................................................................................48

6.3.5 Configuring SNMP Settings ...........................................................................................50

6.3.6 Configuring 802.1X Settings ..........................................................................................51

6.3.7 Configuring QoS Settings...............................................................................................53

6.3.8 Configuring FTP Settings ...............................................................................................54

6.3.9 Configuring UPnP™ Settings..........................................................................................55

6.3.10 Configuring NAT (Network Address Translation) Settings ...........................................55

6.3.11 Configuring Email Settings ........................................................................................56

6.4 Configuring Video and Audio Settings ...............................................................................58

6.4.1 Configuring Video Settings............................................................................................58

6.4.2 Configuring Audio Settings............................................................................................59

6.4.3 Configuring ROI Settings ...............................................................................................60

6.5 Configuring Image Settings ...............................................................................................61

6.5.1 Configuring Display Settings..........................................................................................61

6.5.2 Configuring OSD Settings ..............................................................................................67

6.5.3 Configuring Text Overlay Settings ..................................................................................69

6.6 Configuring and Handling Alarms......................................................................................70

6.6.1 Configuring Motion Detection.......................................................................................70

6.6.2 Configuring Video Loss Alarm .......................................................................................74

6.6.3 Configuring Video Tampering Alarm..............................................................................75

6.6.4 Configuring External Alarm Input ..................................................................................76

6.6.5 Configuring Alarm Output.............................................................................................78

6.6.6 Handling Exception.......................................................................................................79

Chapter 7 Record Settings ........................................................................................................81

7.1 Configuring NAS Settings...................................................................................................81

7.2 Configuring Recording Schedule........................................................................................82

7.3 Configuring Snapshot Settings...........................................................................................86

Chapter 8 Playback...................................................................................................................88

Chapter 9 Log Searching...........................................................................................................92

Chapter 10 Others......................................................................................................................94

10.1 Managing User Accounts ..................................................................................................94

10.2 Configuring RTSP Authentication.......................................................................................97

10.3 Configuring Anonymous Visit............................................................................................97

10.4 Configuring IP Address Filter.............................................................................................98

10.5 Viewing Device Information..............................................................................................98

10.6 Maintenance ....................................................................................................................99

10.6.1 Rebooting the Speed Dome ......................................................................................99

10.6.2 Restoring Default Settings.........................................................................................99

10.6.3 Importing/Exporting Configuration File...................................................................100

www.cctvireland.ie

User Manual of IR Network Speed Dome

10.6.4 Upgrading the System............................................................................................. 100

10.7 RS-485 Settings............................................................................................................... 102

Appendix .......................................................................................................................................103

Appendix 1 SADP Software Introduction ..................................................................................... 103

Appendix 2 Port Mapping ...........................................................................................................105

www.cctvireland.ie

User Manual of IR Network Speed Dome

Chapter 1 Overview

1.1 System Requirement

System requirement of web browser accessing is as follows:

Operating System: Microsoft Windows XP SP1 and above version / Vista / Win7 /

Server 2003 / Server 2008 32bits

CPU: Intel Pentium IV 3.0 GHz or higher

RAM: 1G or higher

Display: 1024×768 resolution or higher

Web Browser: Internet Explorer 7.0 and above version, Apple Safari 5.02 and above

version, Mozilla Firefox 3.5 and above version and Google Chrome8 and above

versions.

1.2 Appearance

Figure 1-1 Appearance

1.3 Functions

Note: The functions vary depending on the models of speed dome.

Limit Stops

The dome can be programmed to move within the limit stops (left/right, up/down).

Scan Modes

The dome provides 5 scan modes: auto scan, tilt scan, frame scan, random scan and

panorama scan.

Preset Freezing

This feature freezes the scene on the monitor when the dome is moving to a preset.

www.cctvireland.ie

User Manual of IR Network Speed Dome

This allows for smooth transition from one preset scene to another. It also

guarantees that masked area will not be revealed when the dome is moving to a

preset.

Presets

A preset is a predefined image position. When the preset is called, the dome will

automatically move to the defined position. The presets can be added, modified,

deleted and called.

Label Display

The on-screen label of the preset title, azimuth/elevation, zoom, time and dome

name can be displayed on the monitor. The displays of time and speed dome name

can be programmed.

Auto Flips

In manual tracking mode, when a target object goes directly beneath the dome, the

video will automatically flips 180 degrees in horizontal direction to maintain

continuity of tracking. This function can also be realized by auto mirror image

depending on different camera models.

Privacy Mask

This function allows you to block or mask certain area of a scene, for preventing the

personal privacy from recording or live viewing. A masked area will move with pan

and tilt functions and automatically adjust in size as the lens zooms telephoto and

wide.

3D Positioning

In the client software, use the left key of mouse to click on the desired position in the

video image and drag a rectangle area in the lower right direction, then the dome

system will move the position to the center and allow the rectangle area to zoom in.

Use the left key of mouse to drag a rectangle area in the upper left direction to move

the position to the center and allow the rectangle area to zoom out.

Proportional Pan/Tilt

Proportional pan/tilt automatically reduces or increases the pan and tilt speeds

according to the amount of zoom. At telephoto zoom settings, the pan and tilt

speeds will be slower than at wide zoom settings. This keeps the image from moving

too fast on the live view image when there is a large amount of zoom.

Auto Focus

The auto focus enables the camera to focus automatically to maintain clear video

images.

Day/Night Auto Switch

The speed domes deliver color images during the day. And as light diminishes at night,

the speed domes switch to night mode and deliver black and white images with high

quality.

Slow Shutter

In slow shutter mode, the shutter speed will automatically slow down in low

illumination conditions to maintain clear video images by extending the exposure

time. The feature can be enabled or disabled.

Backlight Compensation (BLC)

www.cctvireland.ie

Indice

Altri manuali HIK VISION Telecamera a cupola

HIK VISION

HIK VISION DS-2CC592 P(N)-FB Manuale utente

Manuali Telecamera a cupola popolari di altre marche

ACTi

ACTi E89 Manuale utente

Axis

Axis P5414-E PTZ Manuale utente

Avigilon

Avigilon 1.0-H3-DO1 Manuale utente

Zavio

Zavio D4220 Manuale utente

Lilin

Lilin SP9264 Manuale utente

Bosch

Bosch EX40N Manuale utente

Vivotek

Vivotek FE9182-H Manuale utente

Zavio

Zavio P8220 Manuale utente

Eneo

Eneo TVD-1080V2812IR Manuale utente

Bosch

Bosch FLEXIDOME IP 7000 VR Manuale utente

Golbong

Golbong 2252-23 Scheda tecnica

DW Snapit DWC-V4367WD Manuale utente

Vivotek

Vivotek SD9161-H Manuale utente

ALIBI

ALIBI ALI-NS1014VR Manuale utente

Onvif

Onvif IPMV3FI Manuale utente

Riva

Riva RC3502SV-7311 Manuale utente

Zavio

Zavio P6210 Manuale utente

Arecont Vision

Arecont Vision AV1555DN-F Manuale utente