HIK VISION DS-K1T804A Series Manuale utente
DS-K1T804A Series Fingerprint Access
Control Terminal
User Manual
UD18256B-A
Legal Informaon
©2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights
reserved.
About this Manual
The Manual includes instrucons for using and managing the
Product. Pictures, charts, images and all other informaon
hereinaer are for descripon and explanaon only. The
informaon contained in the Manual is subject to change,
without noce, due to rmware updates or other reasons. Please
nd the latest version of this Manual at the Hikvision website
( hps://www.hikvision.com/ ).
Please use this Manual with the guidance and assistance of
professionals trained in supporng the Product.
Trademarks
and other Hikvision's trademarks
and logos are the properes of Hikvision in various jurisdicons.
Other trademarks and logos menoned are the properes of
their respecve owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS
MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE,
SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH
ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A
PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT
YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU
FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT
DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA,
CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,
WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING
NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN
CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF
HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES
FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE
ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY
LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK,
HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET
SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL
APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR
ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN
A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD
PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
i
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA
PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE
THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS
DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF
CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE
CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE
NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS
ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND
THE APPLICABLE LAW, THE LATER PREVAILS.
Data Protecon
During the use of device, personal data will be collected, stored
and processed. To protect data, the development of Hikvision
devices incorporates privacy by design principles. For example,
for device with facial recognion features, biometrics data is
stored in your device with encrypon method; for ngerprint
device, only ngerprint template will be saved, which is
impossible to reconstruct a ngerprint image.
As data controller, you are advised to collect, store, process and
transfer data in accordance with the applicable data protecon
laws and regulaons, including without limitaon, conducng
security controls to safeguard personal data, such as,
implemenng reasonable administrave and physical security
controls, conduct periodic reviews and assessments of the
eecveness of your security controls.
ii
Symbol Convenons
The symbols that may be found in this document are dened as
follows.
Symbol Descripon
Danger Indicates a hazardous situaon which, if not avoided,
will or could result in death or serious injury.
Cauon
Indicates a potenally hazardous situaon which, if
not avoided, could result in equipment damage, data
loss, performance degradaon, or unexpected
results.
Note Provides addional informaon to emphasize or
supplement important points of the main text.
iii
Regulatory Informaon
FCC Informaon
Please take aenon that changes or modicaon not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide
reasonable protecon against harmful interference in a
residenal installaon. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instrucons, may cause harmful interference
to radio communicaons. However, there is no guarantee that
interference will not occur in a parcular installaon. If this
equipment does cause harmful interference to radio or television
recepon, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separaon between the equipment and receiver.
—Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for
help
This equipment should be installed and operated with a minimum
distance 20cm between the radiator and your body.
FCC Condions
This device complies with part 15 of the FCC Rules. Operaon is
subject to the following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operaon.
EU Conformity Statement
This product and - if applicable - the supplied
accessories too are marked with "CE" and
comply therefore with the applicable
harmonized European standards listed under
iv
the EMC Direcve 2014/30/EU, the RoHS
Direcve 2011/65/EU
2012/19/EU (WEEE direcve): Products marked
with this symbol cannot be disposed of as
unsorted municipal waste in the European
Union. For proper recycling, return this product
to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at
designated collecon points. For more
informaon see: www.recyclethis.info
2006/66/EC (baery direcve): This product
contains a baery that cannot be disposed of as
unsorted municipal waste in the European
Union. See the product documentaon for
specic baery informaon. The baery is
marked with this symbol, which may include
leering to indicate cadmium (Cd), lead (Pb), or
mercury (Hg). For proper recycling, return the
baery to your supplier or to a designated
collecon point. For more informaon
see:www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards
requirements.
This device complies with Industry Canada licence-exempt RSS
standard(s). Operaon is subject to the following two condions:
1. this device may not cause interference, and
2. this device must accept any interference, including
interference that may cause undesired operaon of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radioexempts de licence. L'exploitaon
est autorisée aux deux condions suivantes :
1. l'appareil ne doit pas produire de brouillage, et
2. l'ulisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est suscepble d'en
compromere le fonconnement.
Under Industry Canada regulaons, this radio transmier may
only operate using an antenna of a type and maximum (or lesser)
gain approved for the transmier by Industry Canada. To reduce
potenal radio interference to other users, the antenna type and
its gain should be so chosen that the equivalent isotropically
radiated power (e.i.r.p.) is not more than that necessary for
successful communicaon.
Conformément à la réglementaon d'Industrie Canada, le présent
émeeur radio peut fonconner avec une antenne d'un type et
d'un gain maximal (ou inférieur) approuvé pour l'émeeur par
Industrie Canada. Dans le but de réduire les risques de brouillage
radioélectrique à l'intenon des autres ulisateurs, il faut choisir
le type d'antenne et son gain de sorte que la puissance isotrope
rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité
nécessaire à l'établissement d'une communicaon sasfaisante.
This equipment should be installed and operated with a minimum
distance 20cm between the radiator and your body.
v
Cet équipement doit être installé et ulisé à une distance
minimale de 20 cm entre le radiateur et votre corps.
vi
Safety Instrucon
These instrucons are intended to ensure that user can use the
product correctly to avoid danger or property loss.
The precauon measure is divided into Dangers and Cauons:
Dangers: Neglecng any of the warnings may cause serious injury
or death.
Cauons: Neglecng any of the cauons may cause injury or
equipment damage.
Dangers: Follow these safeguards
to prevent serious injury or death.
Cauons: Follow these precauons
to prevent potenal injury or
material damage.
Dangers
•All the electronic operaon should be strictly compliance with
the electrical safety regulaons, re prevenon regulaons and
other related regulaons in your local region.
•Please use the power adapter, which is provided by normal
company. The power consumpon cannot be less than the
required value.
•Do not connect several devices to one power adapter as
adapter overload may cause over-heat or re hazard.
•Please make sure that the power has been disconnected
before you wire, install or dismantle the device.
•When the product is installed on wall or ceiling, the device
shall be rmly xed.
•If smoke, odors or noise rise from the device, turn o the
power at once and unplug the power cable, and then please
contact the service center.
•Do not ingest baery, Chemical Burn Hazard.
This product contains a coin/buon cell baery. If the coin/
buon cell baery is swallowed, it can cause severe internal
burns in just 2 hours and can lead to death.
Keep new and used baeries away from children. If the baery
compartment does not close securely, stop using the product
and keep it away from children. If you think baeries might
have been swallowed or placed inside any part of the body,
seek immediate medical aenon.
•If the product does not work properly, please contact your
dealer or the nearest service center. Never aempt to
disassemble the device yourself. (We shall not assume any
responsibility for problems caused by unauthorized repair or
maintenance.)
Cauons
•This equipment is not suitable for use in locaons where
children are likely to be present.
•Do not drop the device or subject it to physical shock, and do
not expose it to high electromagnesm radiaon. Avoid the
vii
equipment installaon on vibraons surface or places subject
to shock (ignorance can cause equipment damage).
•Do not place the device in extremely hot (refer to the
specicaon of the device for the detailed operang
temperature), cold, dusty or damp locaons, and do not
expose it to high electromagnec radiaon.
•The device cover for indoor use shall be kept from rain and
moisture.
•Exposing the equipment to direct sun light, low venlaon or
heat source such as heater or radiator is forbidden (ignorance
can cause re danger).
•Do not aim the device at the sun or extra bright places. A
blooming or smear may occur otherwise (which is not a
malfuncon however), and aecng the endurance of sensor
at the same me.
•Please use the provided glove when open up the device cover,
avoid direct contact with the device cover, because the acidic
sweat of the ngers may erode the surface coang of the
device cover.
•Please use a so and dry cloth when clean inside and outside
surfaces of the device cover, do not use alkaline detergents.
•Please keep all wrappers aer unpack them for future use. In
case of any failure occurred, you need to return the device to
the factory with the original wrapper. Transportaon without
the original wrapper may result in damage on the device and
lead to addional costs.
•Improper use or replacement of the baery may result in
hazard of explosion. Replace with the same or equivalent type
only. Dispose of used baeries according to the instrucons
provided by the baery manufacturer.
•You can view the device License via the website: hp://
opensource.hikvision.com/Home/List?id=46.
viii
Available Models
The ngerprint access control terminal contains the following
models:
Product Name Model Descripon
Fingerprint Access
Control Terminal
DS-K1T804AF Supports ngerprint
only.
DS-K1T804AMF Supports presenng
Mifare card.
DS-K1T804AEF Supports presenng
EM card.
Use only power supplies listed in the user instrucons:
Model Manufacturer Standard
DSA-12PFT-12FUK
120100
Dee Van Enterprise
Co., Ltd. BS
DSA-12PFT-12FAU
120100
Dee Van Enterprise
Co., Ltd. AS
DSA-12PFT-12FIN
120100
Dee Van Enterprise
Co., Ltd. IS
DSA-12PFT-12FUS
120100
Dee Van Enterprise
Co., Ltd. IEC
DSA-12PFT-12 FBZ
120100
Dee Van Enterprise
Co., Ltd. NBR
ADS-12B-12 12012E Shenzhen Honor
Electronics Co., Ltd. IEC
ADS-12B-12 12012E Shenzhen Honor
Electronics Co., Ltd. NEMA
ADS-12B-12 12012E Shenzhen Honor
Electronics Co., Ltd. NBR
ADS-12B-12 12012E Shenzhen Honor
Electronics Co., Ltd. BS
ix
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali HIK VISION Controllori di accesso IP
HIK VISION
HIK VISION DS-K1F600U-D6E Series Manuale utente
HIK VISION
HIK VISION DS-K5603-Z Manuale utente
HIK VISION
HIK VISION DS-K2601 Istruzioni operative e di manutenzione
HIK VISION
HIK VISION DS-K2600 Series Manuale utente
HIK VISION
HIK VISION DS-K5603-Z Manuale utente
HIK VISION
HIK VISION DS-K2600 Series Manuale utente
HIK VISION
HIK VISION DS-K1T501SF Manuale utente
HIK VISION
HIK VISION UD12126B-B Manuale utente
HIK VISION
HIK VISION DS-K1T105E-C Manuale utente
HIK VISION
HIK VISION DS-K2600-G Series Manuale utente
HIK VISION
HIK VISION DS-K2600 Series Manuale utente
HIK VISION
HIK VISION DS-K5671-3XF Series Manuale utente
HIK VISION
HIK VISION DS-K4E100 Manuale utente
HIK VISION
HIK VISION DS-K1T802 Manuale utente
HIK VISION
HIK VISION DS-K3B601 Manuale utente
HIK VISION
HIK VISION DS-K1T500S Manuale utente
HIK VISION
HIK VISION 26 series Manuale utente
HIK VISION
HIK VISION DS-K2604T Manuale utente
HIK VISION
HIK VISION UD22708B Manuale utente
HIK VISION
HIK VISION DS-K1T105M Guida di sicurezza
