HIK VISION ColorVu Manuale utente

Configuration Guide of ColorVu

Camera LED Supplement Light

1 Brightness configuration of LED supplement light

Note:

1, When the camera is electrified, it is self-check at full power, and the supplement light is bright,

so avoid to stare at supplement light of camera;

2, LED supplement light will be locked in the light-on state for an hour after continuous switching

for 5 times in a short time due to manual test or ambient brightness change.

Path：【 Configuration】-【System】-【System Settings】-【External Device】

1.1 Enable supplement light

1.2 LED light brightness adjustment

LED light brightness can be set to Manual mode or Auto mode.

1.2.1 Manual mode

1. Select Manual mode in LED Light Brightness Adjustment;

2. Adjust LED light Brightness during level 1-100, 0 means no brightness;

3. Startup default is level 15 (sample model is 50, order model is 15)

1.2.2 Auto mode

1. Select LED Light Brightness Adjustment mode with Auto, camera will detect ambient brightness

automatically, adjusting the brightness of supplement light.

2. The level of LED light brightness can limit the maximum brightness of supplement light.

2 Mode configuration of LED Light On

Mode of LED Light On can be set to Timing or Auto.

2.1 Timing mode

1. Selecting Timing in LED Light On, camera will turn on/off the LED supplement light according to

Start/End Time;

2. Setting schedule time according to application requirements. Start time should be earlier than

End Time. Start Time can be on the previous day of End Time.

2.2 Auto mode

1. Camera will detect ambient brightness automatically with Auto mode, and turn on LED light

automatically. The mechanism is similar to the automatic adjustment of infrared supplement

lamplight;

2. Setting filtering time in the range of 0-120s;

When the ambient brightness exceeds the light limit and lasts for a period of time (as shown in the

picture below: 5 seconds), the camera begins to turn the light on and off. This setting prevents the

camera from continuing to turn on and off lights when the brightness changes rapidly;

3. Setting sensitivity in the range of 0-7;

The lower the sensitivity, the greater changing in ambient brightness is required before the camera

can turn on and off the light;

The higher the sensitivity, the lower the requirement of ambient brightness change;

4. Currently, the default mode is Auto. Adjusting the parameters or customizing the firmware if

need to turn off the light by default.

Indice

Altri manuali HIK VISION Telecamera di sicurezza

HIK VISION

HIK VISION UD.6L0201D0151A01 Guida utente

HIK VISION

HIK VISION DS-2CE16C0T-IRF Manuale utente

HIK VISION

HIK VISION iDS-2XM6810F-I/C Guida rapida

HIK VISION

HIK VISION ECI-T22Fx Manuale utente

HIK VISION

HIK VISION iDS-TCM403-B/0832 Manuale utente

HIK VISION

HIK VISION DS-2TD2636-15 Manuale utente

HIK VISION

HIK VISION EPI-4225I-DE Manuale utente

HIK VISION

HIK VISION DS-2DP1636ZIX-D Manuale utente

HIK VISION

HIK VISION iDS-2CD9136-AIS Manuale utente

HIK VISION

HIK VISION DS-2CD7D47G0-XS(2.8mm) Manuale utente

HIK VISION

HIK VISION DS-2DF1-574D Manuale utente

HIK VISION

HIK VISION DS-2CC51A5PN-VF Manuale utente

HIK VISION

HIK VISION DS-2DF1-57XY Manuale utente

HIK VISION

HIK VISION DS-2CE1582N-IR Manuale utente

HIK VISION

HIK VISION D3T Series Manuale utente

HIK VISION

HIK VISION DS-2CV2G46G0-IDW Manuale utente

HIK VISION

HIK VISION DS-2CD4A26FWD-IZSP Manuale utente

HIK VISION

HIK VISION DS-2DE2103 Manuale utente

HIK VISION

HIK VISION DS-2CD5A46GO-IZS Manuale utente

HIK VISION

HIK VISION IDS-2CD70C5G0-AP Manuale utente

HIK VISION

HIK VISION DS-2CD2412F-I Manuale dell'operatore

HIK VISION

HIK VISION PanoVu iDS-2PT9122IX-DE/S Guida rapida

HIK VISION

HIK VISION DS-2CD2452F-IW Manuale utente

HIK VISION

HIK VISION DS-2CE16D0T-I2PFB Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente