HIK VISION DS-2CD6D54G1-IZS Manuale utente

Flexible Network Camera

Quick Start Guide

rights reserved.

About this Manual

The Manual includes instructions for using and managing the

Product. Pictures, charts, images and all other information

hereinafter are for description and explanation only. The information

contained in the Manual is subject to change, without notice, due to

rmware updates or other reasons. Please nd the latest version of

this Manual at the Hikvision website (http://www.hikvision.com).

Please use this Manual with the guidance and assistance of

professionals trained in supporting the Product.

Trademarks Acknowledgment

and other Hikvision’s trademarks and logos are

the properties of Hikvision in various jurisdictions.

Other trademarks and logos mentioned are the properties of their

respective owners.

LEGAL DISCLAIMER

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,

THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS

HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED

“AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKVISION

MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING

WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY

QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE

USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN

NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY

SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT

DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR

LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION,

OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS

OF DOCUMENTATION, WHETHER BASED ON BREACH OF

CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT

LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE

OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET

PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION

SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL

OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES

RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS

INSPECTION, OR OTHER INTERNET SECURITY RISKS;

HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL

SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH

ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE

FOR ENSURING THAT YOUR USE CONFORMS TO THE

APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE,

FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT

INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING

WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL

PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER

PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR

ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT

OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION,

THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR

BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT

RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE

NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS

ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL

AND THE APPLICABLE LAW, THE LATER PREVAILS.

Regulatory Information

FCC Information

Please take attention that changes or modification not expressly ap-

proved by the party responsible for compliance could void the user’s

authority to operate the equipment.

FCC compliance: This equipment has been tested and found to com-

ply with the limits for a Class B digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equip-

ment generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help

FCC conditions

This device complies with part 15 of the FCC Rules. Operation is sub-

ject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied accessories

too are marked with "CE" and comply therefore withthe

applicable harmonized European standards listed under

the the EMC Directive 2014/30/EU, the RoHS Directive

2011/65/EU.

2012/19/EU (WEEE directive): Products marked with

this symbol cannot be disposed of as unsorted municipal

waste in the European Union. For proper recycling, return

this product to your local supplier upon the purchase of

equivalent new equipment, or dispose of it at designated

collection points. For more information see: www.

recyclethis.info

2006/66/EC and its amendment 2013/56/EU (battery

directive): This product contains a battery that cannot be

disposed of as unsorted municipal waste in the European

Union. See the product documentation for specic battery

information. The battery is marked with this symbol, which

may include lettering to indicate cadmium (Cd), lead (Pb),

or mercury (Hg). For proper recycling, return the battery to

your supplier or to a designated collection point. For more

information see: www.recyclethis.info.

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (B)/NMB-3(B) standards require-

ments.

Cautions&Warnings

These instructions are intended to ensure that the user can use the

product correctly to avoid danger or property loss.

Laws and Regulations

The device should be used in compliance with local laws,

electrical safety regulations, and re prevention regulations.

Transportation

Keep the device in original or similar packaging while transporting

it.

Power Supply

The power source should meet limited power source or PS2

requirements according to IEC 60950-1 or IEC 62368-1 standard.

Refer to the appropriate documentation for detailed information.

DO NOT connect multiple devices to one power adapter, to avoid

over-heating or re hazards caused by overload.

Make sure the plug is properly connected to the power socket.

System Security

The installer and user are responsible for password and security

conguration.

Battery

This equipment is not suitable for use in locations where children

are likely to be present.

CAUTION: Risk of explosion if the battery is replaced by an

incorrect type. Dispose of used batteries according to the

instructions

ATTENTION: IL Y A RISQUE D'EXPLOSION SI LA BATTERIE

EST REMPLACÉE PAR UNE BATTERIE DE TYPE

INCORRECT. METTRE AU REBUT LES BATTERIES USAGÉES

CONFORMÉMENT AUX INSTRUCTIONS

Improper replacement of the battery with an incorrect type may

defeat a safeguard (for example, in the case of some lithium

battery types).

DO NOT dispose of the battery into fire or a hot oven, or

mechanically crush or cut the battery, which may result in an

explosion.

DO NOT leave the battery in an extremely high temperature

surrounding environment, which may result in an explosion or the

leakage of ammable liquid or gas.

DO NOT subject the battery to extremely low air pressure, which

may result in an explosion or the leakage of ammable liquid or

gas.

Maintenance

If the product does not work properly, please contact your

dealer or the nearest service center. We shall not assume any

responsibility for problems caused by unauthorized repair or

maintenance.

A few device components (e.g., electrolytic capacitor) require

regular replacement. The average lifespan varies, so periodic

checking is recommended. Contact your dealer for details.

Cleaning

Please use a soft and dry cloth when clean inside and outside

surfaces of the product cover. Do not use alkaline detergents.

Using Environment

When any laser equipment is in use, make sure that the device

lens is not exposed to the laser beam, or it may burn out.

DO NOT expose the device to high electromagnetic radiation or

dusty environments.

For indoor-only device, place it in a dry and well-ventilated

environment.

DO NOT aim the lens at the sun or any other bright light.

Make sure the running environment meets the requirement of

the device. The operating temperature shall be -30°C to +60°C

(-22 °F to 140 °F), or -40°C to +60°C (-40 °F to 140 °F) if the

camera model has an “H” in its sufx, and the operating humidity

shall be 95% or less (no condensing).Refer to the appropriate

documentation for detailed information.

DO NOT place the device in extremely hot, cold, dusty or damp

locations, and do not expose it to high electromagnetic radiation.

White Light Illuminator (If supported)

Possibly hazardous optical radiation emitted from this product.

DO NOT stare at operating light source. May be harmful to the

eyes.

Wear appropriate eye protection or DO NOT turn on the white light

when you assemble, install or maintain the camera.

Emergency

If smoke, odor, or noise arises from the device, immediately turn

off the power, unplug the power cable, and contact the service

center.

Time Synchronization

Set up device time manually for the first time access if the local

time is not synchronized with that of the network. Visit the device

via Web browse/client software and go to time settings interface.

Installation

This camera series shares a similar structure. We take one type

among this series for demonstration.

Make sure the device is firmly secured to any wall or ceiling

mountings.

Be sure that there is enough space to install the device and

accessories.

Make sure that the device in the package is in good condition and

all the assembly parts are included.

Make sure that the wall is strong enough to withstand at least 4

times the weight of the device and the mount.

Please make sure your power supply matches with your device.

Refer to the appropriate documentation for detailed information.

Make sure that the power has been disconnected before you wire,

install, or disassemble the device.

Make sure that no reective surface is too close to the device

lens. The IR light from the device may reect back into the lens

causing reection.

CAUTION: Hot parts! Burned ngers when handling

the parts. Wait one-half hour after switching off

before handling parts. This sticker is to indicate that

the marked item can be hot and should not be touched without

taking care. For device with this sticker, this device is intended for

installation in a restricted access location, access can only be

gained by service persons or by users who have been instructed

about the reasons for the restrictions applied to the location and

about any precautions that shall be taken.

Symbols and Marks

Notice

Warning

Forbidden

Correct

Incorrect

Turn to page A and continue.

i. Not necessarily included accessory.

ii. Variable accessory amount.

iii. Skip this step if not required.

MicroSD card

Grounding

Disposal

Purchase separately

Other situations

Other situations omitted

Waterproof

Skip this step if not necessary

Indice

Altri manuali HIK VISION Telecamera di sicurezza

HIK VISION

HIK VISION HWI-T241H Manuale utente

HIK VISION

HIK VISION DS-2CC502 / 572P(N)-M Manuale utente

HIK VISION

HIK VISION TURBO HD TVI-AC334-FD4/FD4-2.8 Manuale utente

HIK VISION

HIK VISION DS-2CD1043G0E-I Manuale utente

HIK VISION

HIK VISION DINOX DSR-3310 Manuale utente

HIK VISION

HIK VISION UD05331N Manuale utente

HIK VISION

HIK VISION DS-2CE10DFT-FC Manuale utente

HIK VISION

HIK VISION iDS-TCE507-BR Foglio di istruzioni

HIK VISION

HIK VISION PanoVu Mini Manuale utente

HIK VISION

HIK VISION DS-2CD2132-I Manuale utente

HIK VISION

HIK VISION DS-2TD4136T-25 Manuale utente

HIK VISION

HIK VISION DS-2CC12D8T-AMM Manuale utente

HIK VISION

HIK VISION DS-2AF1-7XY-B Manuale utente

HIK VISION

HIK VISION DS-2CD854F-E series Manuale utente

HIK VISION

HIK VISION DS-2CE12DFT-PIRXOF Manuale utente

HIK VISION

HIK VISION DS-2TD2466-9X Manuale utente

HIK VISION

HIK VISION HWP-N2404IH-DE3 Manuale utente

HIK VISION

HIK VISION HiWatch DS-I112 Manuale utente

HIK VISION

HIK VISION DSR-5310 Manuale utente

HIK VISION

HIK VISION DE4 Series Manuale utente

HIK VISION

HIK VISION ECI-B62Z2 Manuale utente

HIK VISION

HIK VISION DS?2CD753F?E Manuale utente

HIK VISION

HIK VISION DS-2CE1512PN-IR Manuale utente

HIK VISION

HIK VISION DS-2CD8153F-EWI Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente