HIK VISION DS-2TD4166-50/V2 Manuale utente

Thermal Bi-spectrum

Network Speed Dome

Quick Start Guide

Thermal Network Speed Dome Quick Start Guide

Quick Start Guide

Any and all information, including, among others, wordings, pictures, graphs are the

properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries

(hereinafter referred to be “Hikvision”). This user manual (hereinafter referred to be

“the Manual”) cannot be reproduced, changed, translated, or distributed, partially or

wholly, by any means, without the prior written permission of Hikvision. Unless

otherwise stipulated, Hikvision does not make any warranties, guarantees or

representations, express or implied, regarding to the Manual.

About this Manual

This Manual is applicable to Thermal Bi-spectrum Network Speed Dome.

The Manual includes instructions for using and managing the product. Pictures, charts,

images and all other information hereinafter are for description and explanation only.

The information contained in the Manual is subject to change, without notice, due to

firmware updates or other reasons. Please find the latest version in the company

website (http://overseas.hikvision.com/en/).

Please use this user manual under the guidance of professionals.

Trademarks Acknowledgement

and other Hikvision’s trademarks and logos are the properties of Hikvision

in various jurisdictions. Other trademarks and logos mentioned below are the properties

of their respective owners.

Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED,

WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL

FAULTS AND ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY,

FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN

NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE

LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT

DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,

BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION

WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES.

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE

WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR

Thermal Network Speed Dome Quick Start Guide

iii

ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM

CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY

RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN

YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR

USE CONFORMS THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT

THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW,

THE LATER PREVAILS.

Regulatory Information

FCC Information

FCC compliance: This equipment has been tested and found to comply with the limits

for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference

in which case the user will be required to correct the interference at his own expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may

cause undesired operation

EU Conformity Statement

This product and - if applicable - the supplied accessories too are marked

with "CE" and comply therefore with the applicable harmonized European

standards listed under the EMC Directive 2014/30/EU, the RoHS Directive

2011/65/EU.

2012/19/EU (WEEE directive): Products marked with this symbol cannot be

disposed of as unsorted municipal waste in the European Union. For proper

recycling, return this product to your local supplier upon the purchase of

equivalent new equipment, or dispose of it at designated collection points.

For more information see: www.recyclethis.info.

2006/66/EC (battery directive): This product contains a battery that cannot

be disposed of as unsorted municipal waste in the European Union. See the

product documentation for specific battery information. The battery is

marked with this symbol, which may in clude lettering to indicate cadmium

(Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to

Thermal Network Speed Dome Quick Start Guide

your supplier or to a designated collection point. For more information see:

www.recyclethis.info.

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

Safety Instruction

These instructions are intended to ensure that user can use the product correctly to

avoid danger or property loss.

The precaution measure is divided into Warnings and Cautions:

Warnings: Neglecting any of the warnings may cause serious injury or death.

Cautions: Neglecting any of the cautions may cause injury or equipment damage.

Warnings

The device should be used in compliance with local laws and electrical safety

regulations. Refer to the appropriate documentation for detailed information.

The input voltage should conform to IEC60950-1 standard: SELV (Safety Extra Low

Voltage) and the Limited Power Source (24 VAC). Refer to the appropriate

documentation for detailed information.

DO NOT connect multiple devices to one power adapter, to avoid over-heating or fire

hazards caused by overload.

Make sure the plug is properly connected to the power socket.

If smoke, odor, or noise arises from the device, immediately turn off the power,

unplug the power cable, and contact the service center.

The installer and user are responsible for password and security configuration and its

settings.

Both internal and external grounds should be connected properly. (The cross section

area of the grounding wire must be no less than 4 mm2, and no less than that of the

phase connector).

Cautions

Do not drop the device or subject it to physical shock.

Warnings Follow

these safeguards to

prevent serious

injury or death.

Cautions Follow these

precautions to prevent

potential injury or

material damage.

Thermal Network Speed Dome Quick Start Guide

Wipe the device gently with a clean cloth and a small quantity of ethanol, if

necessary.

Do not aim the lens at the sun or any other bright light.

When any laser equipment is in use, make sure that the device lens is not exposed to

the laser beam, or it may burn out.

Do not place the camera in extremely hot, cold (the operating temperature shall

be-30°C ~+60°C), dusty or damp locations, and do not expose it to high

electromagnetic radiation.

Place the device in a dry and well-ventilated environment.

Keep non-waterproof devices away from liquids.

Keep the device in original or similar packaging while transporting it.

A few device components (e.g., electrolytic capacitor) require regular replacement.

The average lifespan varies, so periodic checking is recommended. Contact your

dealer for details.

Improper use or replacement of the battery may result in explosion hazard. Replace

with the same or equivalent type only. Dispose of used batteries in conformance with

the instructions provided by the battery manufacturer.

Never attempt to disassemble the device.

0505121090329

 
Thermal Network Speed Dome Quick Start Guide 
 
vi 
Table of Contents 
Preparation ..................................................................................................1 
Appearance Description ...............................................................................2 
1 Speed dome Appearance......................................................................................... 2 
2 Cable Descriptions ................................................................................................... 2 
3 Alarm In/Out Connections....................................................................................... 3 
Installing the Speed dome............................................................................4 
1 Monitoring Distance Range ..................................................................................... 5 
2 Wiring...................................................................................................................... 6 
3 Installing Memory Card ........................................................................................... 9 
4 Installing Speed Dome ............................................................................................. 9 
5 Finishing Installing ................................................................................................. 14 
Setting the System over the LAN ................................................................15 
1 Wiring.................................................................................................................... 15 
2 Activating the System ............................................................................................ 15 
2.1 Activation via Web Browser ............................................................................ 15 
2.2 Activation via SADP Software.......................................................................... 16 
3 Modifying the IP Address........................................................................................17 
Operating via Web browser........................................................................19 
1 Accessing the System............................................................................................. 19 
2 Live View Page....................................................................................................... 20 
Appendix....................................................................................................22 
1 Common Material Emissivity Reference ................................................................ 22 
2 Frequently Asked Questions (FAQ) ........................................................................ 23 
2.1 Device Running Error ...................................................................................... 23 
2.2 Device Upgrading ............................................................................................ 23 
2.3 Others ............................................................................................................. 23 
 

Thermal Network Speed Dome Quick Start Guide

1Preparation

Basic Requirement

All the electronic operation should be strictly compliance with the electrical safety

regulations, fire prevention regulations and other related regulations in your local

region.

Check the package contents and make sure that the device in the package is in

good condition and all the assembly parts are included.

Use the system according to the working environment requirement.

Checking Installing Environment

Be sure that there is enough space to install the speed dome and accessories.

Make sure that the wall is strong enough to withstand at least 8 times the weight

of the system and the mount.

Preparing Cables

According to the actual network bandwidth, the Cat5 (in 100M) or Cat6 (100M

above) is needed.

When the Speed dome uses standard 24V AC power supply, the power cable

should be American wire gauge 18 or above. The formula of the cross-section S

(mm²) and the maximum transmission distance L (m) of the bare wire is L=50*S.

Choose the video cable according to the transmission length. The video should

meet the least demands as: 75Ω resistance; 100% copper core conducting wire;

95% weaving copper shield.

RS485 communication cable, please refer to Appendix 2

24V AC power cable, please refer to Appendix 3

Preparing Tools

Before installation, please prepare the tools needed, such as the expansion screws,

electric hammer, electric drill, wrench, screwdriver, electroprobe and network

cable.

Original Packaging

When you unpack the speed dome, please keep the original package properly, in

case of returning or repairing the speed dome, you can pack the speed dome with

the package.

Note: The user should be responsible for any damage caused when transporting

with unoriginal package.

Thermal Network Speed Dome Quick Start Guide

2Appearance Description

There are three kinds of thermal network speed domes: Type I speed dome, Type II

speed dome, and Type III speed dome. The appearance description of three cameras are

shown below.

2.1 Speed dome Appearance

Refer to the following figures for thermal speed domes overview.

Type I Speed Dome Type II Speed Dome Type III Speed Dome

Figure 2-1 Thermal Speed dome Overview

2.2 Cable Descriptions

The cable interfaces of speed dome are shown in Figure 2-2. The cables of RS-485,

power supply, alarm inputs, alarm outputs, etc. are distinguished by different colors.

Please refer to the labels attached on the cables for identification.

Thermal Network Speed Dome Quick Start Guide

VIDEO

RED AC24V

YELLOW/GREEN

BLACK AC24V

YELLOW R485

ORANGE R485 +

Power Cable

RS485-

RS485+

Video Cable

Alarm Inputs

Network Cable

Alarm Outputs

Audio Input / Output

Figure 2-2 Cables of Thermal Speed domes

2.3 Alarm In/Out Connections

This section is only for the speed dome with alarm in/out functions.

The speed dome can be connected with alarm inputs (0~5VDC) and alarm outputs. Refer

to the following diagrams for alarm output:

JQC-3FG

Relay

30VDC

GND OUT

L N

～220V AC

Thermal speed

Dome

Relay Output

(10A 250VAC)

Diagram (left) Diagram (right)

OUT(n)

DC Load

Thermal Speed

Dome

Relay Output

OUT(n)

Figure 2-3 Alarm Out Connections

The alarm provides the relay output (no voltage), and the external power supply is

required when it connects to the alarm device.

For DC power supply (left diagram), the input voltage must be no more than 30VDC,

1A.

For AC power supply, the external relay must be used (right diagram) to prevent

damages to the speed dome and avoid risk of electric shock.

Thermal Network Speed Dome Quick Start Guide

3Installing the Speed dome

Before you start:

1. Check the package contents and make sure that the device in the package is in good

condition and all the assembly parts are included.

2. Please turn off the power of the speed dome before connecting the cables.

Do not drag the speed dome with its waterproof cables, or the waterproof

performance is affected.

Please remove the protective film on the dome after the installation.

Do not touch the bubble of the lower dome directly. The image blurs otherwise.

For cement wall, you need to use the expansion screw to fix the bracket. The

mounting hole of the expansion pipe on the wall should align with the mounting

hole on the bracket.

For wooden wall, you can just use the self-tapping screw to fix the bracket.

Please make sure that the wall is strong enough to withstand more than 8 times the

weight of the dome and the bracket.

The bracket in Figure 3-6 is the recommended bracket for this series of speed dome,

and a pendent adapter is required if any other bracket is selected. The dimension of

pendant adapter is G11

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali HIK VISION Telecamera di sicurezza

HIK VISION

HIK VISION UD04357B Manuale utente

HIK VISION

HIK VISION TVI-AC334-VD4Z Manuale utente

HIK VISION

HIK VISION DS-2TD2137-4/P Manuale utente

HIK VISION

HIK VISION DS-2CD1023G0E-IF Manuale utente

HIK VISION

HIK VISION HiLook THC-B127-LPC Manuale utente

HIK VISION

HIK VISION DeepinView DS-2XM6425G0/F Series Manuale utente

HIK VISION

HIK VISION THC-T129-P Manuale utente

HIK VISION

HIK VISION DS-2CE11D0T-PIRL Manuale utente

HIK VISION

HIK VISION DS-2TD2636-15 Manuale utente

HIK VISION

HIK VISION DS-2CE16D(F)7T-AIT3Z Manuale utente

HIK VISION

HIK VISION TURBO HD D8T POC Series Manuale utente

HIK VISION

HIK VISION DS-2CD6D54G1-ZS/RC Manuale utente

HIK VISION

HIK VISION DS-2SF8C442MXG-EL/26 Manuale utente

HIK VISION

HIK VISION DS-2CD852 Series Manuale utente

HIK VISION

HIK VISION DS-2CC5102P Manuale utente

HIK VISION

HIK VISION E-series Manuale utente

HIK VISION

HIK VISION DS-2TD2136-7 Manuale utente

HIK VISION

HIK VISION iDS-TCE507-BR Foglio di istruzioni

HIK VISION

HIK VISION Network Speed Dome Camera Manuale utente

HIK VISION

HIK VISION Explosion-Proof Manuale utente

HIK VISION

HIK VISION iDS-2CD7 G0 Series Manuale utente

HIK VISION

HIK VISION DS-2CD2T87G2-L Manuale utente

HIK VISION

HIK VISION DS-2XC6225G0-L Manuale utente

HIK VISION

HIK VISION UD04395B-B Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente