HIK VISION DS-1901I Guida per l'amministratore

Menson Qi

How to extend the alarm number of netra DVR/NVR

with DS-1901I alarm box

2014-7-16

Hikvision Digital Technology Co., Ltd.

http://www.hikvision.com

Menson Qi

DVR/NVR Side:

Step 1:

Upgrade the DVR/NVR with the special firmware and reboot it.

Steps 2:

Finish RS232 settings as shown below

About Alarm Box DS-1901I

Front Panel

123 4 5 6 7 89 10

No.

Name

Function description

Alarm Output

Alarm output indicator lights when there is alarm output.

Alarm Input

Alarm input indicator lights when there is alarm input.

Power

Power indicator lights when alarm box is powered up.

Status

Indicator flickers when alarm box works correctly.

Arm

Arm indicator lights when there is alarm armed.

Disarm

Disarm indicator lights when all alarms disarmed.

Exception

Exception indicator lights when alarm box error.

Access control

reserved

Tx/Rx

RS485, RS232 transmission indicator

Menson Qi

Rear Panel

No.

Name

Function description

Audio

input

RCA interface for audio input

Volume

Adjust volume, clockwise to turn up; anticlockwise to turn down.

Audio

output

RCA interface for audio output. Max output consumption: 5W.

RS-232

Connector for RS232 device, it’s used for device maintenance and

parameter settings. When connected to DVR/NVR, it can extend

the alarm number of DVR/NVR

DIP Switch

Address

Used for device cascading. When all these 4 switches turn to OFF,

the device hardware address is 0x00, you can set software

address between 1~

Protocol

Used to set RS-232 communication protocol

Default

Used to default the device parameters.

Terminal

resister

Terminal resister switch for RS-485. The default settings is

unconnected (Switch turns Up); when switch turn down, the 120

Ωresister is connected

RS-485

interface

Connector for RS-485 device

Alarm output

Alarm

output

Alarm output (16-ch ON-OFF output)

Alarm input

Alarm

input

Alarm input (16-ch ON-OFF input)

Access control

Reserved

Access control

Reserved

AUX5V

5VDC

output

Power output 5V/1A

AUX12V

12VDC

output

Power output12V/1A

BELL

Bell

Power output 12V

Menson Qi

BAT

Storage

battery

Connector for Storage battery

Ground

Power switch

Power on/off

Alarm input wiring

Alarm input is the connectors for external detector. When the resistor between the alarm input is 2.2kΩ, the alarm input won’t be

triggered; else, the alarm input is triggered.

You can find the 2.2kΩresisters with the alarm box.

When the external detector is N.O (close when triggered; open when not triggered), please refer to below:

When the external detector is N.C (open when triggered; close when not triggered), please refer to below:

Alarm box side

Step 1:

Connect the alarm box with DVR via RS232 cable.

Step 2:

Connect power supply cable with alarm box and power on

Step 3:

Menson Qi

Go to DVR/NVR local Menu> Configuration> Alarm> Alarm Input/ Output to check the alarm number of the DVR/NVR.

If you have any other questions or requests, please contact regional technical support for further assistance.

HIKVISION UK Team.

EU technical support center: +44 (0)808 134 9934

UK technical support email: chenchu@hikvision.com

Indice

Altri manuali HIK VISION Sistema di sicurezza

HIK VISION

HIK VISION DS-9600NI-ST Series Manuale utente

HIK VISION

HIK VISION DS-19A Series Manuale utente

HIK VISION

HIK VISION AX PRO Manuale utente

HIK VISION

HIK VISION DS-PEA Series Manuale utente

HIK VISION

HIK VISION Pyronix Euro Mini Manuale utente

HIK VISION

HIK VISION DS-K1T604M Manuale utente

HIK VISION

HIK VISION DS-PWA32-HR Manuale utente

HIK VISION

HIK VISION DS-PS1-I-WA Manuale utente

HIK VISION

HIK VISION DS-PEA22-F Manuale utente

HIK VISION

HIK VISION DS-2TD6537T-50H4LX/W Manuale utente

HIK VISION

HIK VISION AX Series Manuale utente

HIK VISION

HIK VISION ITS Istruzioni per l’uso

HIK VISION

HIK VISION 607 Series Manuale utente

HIK VISION

HIK VISION DS-PEA12-P/ZJ Manuale utente

HIK VISION

HIK VISION DS-KD8003-IME1 Manuale utente

HIK VISION

HIK VISION DS-MI9605-GA Series Manuale utente

HIK VISION

HIK VISION DS-PHA20-P Manuale utente

HIK VISION

HIK VISION DS-PK-LRT Manuale utente

HIK VISION

HIK VISION AX PRO M2 Manuale utente

HIK VISION

HIK VISION Blazer Express Station Manuale utente

HIK VISION

HIK VISION AX PRO Series Guida all'installazione

HIK VISION

HIK VISION AX DS-PW32-H Series Manuale utente

HIK VISION

HIK VISION AX HYBRID PRO Manuale utente

HIK VISION

HIK VISION Pyronix EURO 46 V10 Manuale del proprietario

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente