!Central Unit protection by internal tamper (can be excluded for maintenance).
1.3 Technical Features
Transformer fuse
!Maximum current supplied in services output: 400mA
!Maximum current supplied by power supplier: 700mA
!Fuse on services output voltage: 1Atype F
type
Maximum Operating Temperature:
!Box :ABS.
!Operating Voltage: 230Vac ±10% 50Hz
!Maximum absorption: 80mA
!Transformer fuse: (primary) 250mAtype F
!: (secondary) 1Atype F
!Buffer battery: 12V 7Ah
!Service output voltage: 13Vdc ±5%
!Sirens Output Fuse: 3,15A F
!Minimum Operating Temperature: 5°C ±2%
!40°C ±2%
!Box Protection Level: IP30
!Dimensions: 280x230x95mm
1 Introduction
Dear Customer,
Thanks to have bought a HILTRON product. Please read this manual thoroughly before
use and during the installation. Keep it handy for future reference.
As HILTRON customer, you can
HILTRON
1.1 Central Unit Description
The H347B is a burglar central unit with microprocessor technology for Burglar Protection
System , all and medium private and commercial premises. It allows to manage a wired
zone by traditional NC line, and also to manage three radio zones where you can connect
unlimited number of volumetric detectors typ 348B 346B
350B
manage the remote of H295G sirens and
telephone dialers by relay.
173C, H287B or H105B.
1.2 Operating Features
!
!
!
!
!
!
use a series of services, such as the telephone technical
assistance on the products.
to use also with "switch" fast contacts.
Alarm is signalled by the self-powered radio electronic siren H ; moreover, other
additional signalling are realizable by wired connection (of a siren type H295G, H125H or a
telephone dialer) directly to the central unit, or by H353B radio module, which signals the alarm
status of the system, and to allow to enabling
has to use
"24h"
enabled/disabled system, alarm, unloaded
batteries and sirens voltage with acoustic signalling (excludible), RX/TX
(excludible)
(excludible)
excludible
!Automatic alarm occurs in case of main power supply absence.(programmable)
!Enabling/desabling system by remote control H345B, mechanic key on front pannel, or
H173C, H287B, H105B command systems.
Relay contact for
wired sirens and/or telephone dialers.
12V Output on enabled system.
!TEST function for sensors range control, H350B siren operating test, Radiophonic
Listening function for the placement of the Central Unit.
s for sm
e H or H radio sensors with 2 traditional
NC line input built-in,
The H353B two input either as traditional NC line input, or
as system enabling/disabling control by H command systems.
5 protection zones: 1 wired immediate/delayed zone, 3 immediate radio zones, 1
antisabotage zone
Control LEDs: main voltage detection,
activities with RF
channel sabotage signalling , zone status and alarm history visualization, 24h
zone status.
"ALARM MEMORY" function to display alarmed zones. Programmable exiting and
entering times of Zone 1 (wired), and programmable alarm time.
Acoustic signalling for exiting and entering times . Acoustic signaling for RF
channel interferences ( ).
Programmable 18bit System Code. Radio Output Alarm for H350B siren;
THE PRODUCTS RESULT CONFORMTO THE FOLLOWING STANDARDS REQUIREMENTDS:
STND SPECIFICATION TITLE
EN50081-1 EMISSION STND
Part 1: residential,commercial and light industry.
EN50082-1 IMMUNITY STND
Part 1: residential,commercial and light industry.
EN60335-1 SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL
APPLIANCES
CONFORMITY WAS BASED ON EMC PERFORMANCE TESTS CONDUCTED ON SAMPLE RUNNING IN THE DESIGNED
WORKING CONDITIONSAS FOR ITS FUNCTIONAL PROJECT, IT MEETS 89/336/EECAND 73/23 CEE.
DATE
2 January 2002
COMPANYMANAGEMENT
CONSTRUCTOR: HiLTRON S.r.l.
ADDRESS: Via Caserta al Bravo, 218 - 80144 - NAPOLI
PRODUCT CODES: 347B, 356B, 268B, 348B, 346B, 350B, 353B, 345B.HHHHHHHH
DECLARATION OF CONFORMITY
4 5
Introduction
H347B - User’s Manual
HiLTRON
S.r.l.
®
PROGETTAZIONE E PRODUZIONE APPARECCHIATURE ELETTRONICHE