2
一 注意事項 :
I. Notice:
1: 使用此變壓器時,請先閱讀本操作手冊,以期正確安全之使用.
Please read this operation manual before using the transformer for correct and safe use.
2: 此變壓器應使用於正確之輸入電壓.
The transformer shall be used with correct input of voltage.
3: 此變壓器須於通風良好之埸所使用.
The transformer shall be used in a place of good ventilation.
4: 請將變壓器安放於乾淨,乾燥之埸所,並遠離油氣,瓦斯,雜訊與高壓之地點.
Please put the transformer in a clean and dry place, which is far away from oil, gas, noise and high voltage sites.
5: 使用時變壓器請確實接地.
Please make sure the transformer is grounded in use.
6: 當分離或組合變壓器與電動起子時須確定電源為關閉狀態.
When assembling or disassembling the transformer and electric driver, make sure the power is OFF.
7: 確定螺絲鎖緊之時間,以期在適當時機啟用變壓器之停止功能 ( STOP function ).
Make sure the screw locking time to use the STOP function at a proper time.
8: 如有超過螺絲鎖緊之時間 (如滑牙,螺絲不良,無螺絲之狀態………等), 應啟用停止之功能,以避免電動起子不必要之旋轉.
When exceeding the screw locking time (such as sliding, poor screw, no screw state etc.)
9: 安置變壓器與控制器時信號線與電動起子控制線不可太長,以避免動作不正確.
When installing the transformer and control, it not desirable to have too long signal line or control line of the electric driver to avoid any
incorrect movements.
10: 變壓器應放置於清楚看見以及容易移動方便維護之位置.
The transformer shall be put at a place where it is clearly seen, easy to move and convenient for maintenance.
