HIS HIS-ML20- *** B Manuale utente

20" PANEL MOUNT INDUSTRIAL MONITOR
USER MANUAL
Model No. HIS-ML20- _ _ _ B
REVISION B

2 ML20B User Manual, January 2015
Table of Contents
Safety and Regulatory Information ��������������������������������������������������������������������������������3
FCC Notice �����������������������������������������������������������������������������������������������������������������������������3
Waste Electrical and Electronic Equipment Directive (WEEE) �����������������������������������������������3
Mechanical Drawings ������������������������������������������������������������������������������������������������������4
Front and Side Views �������������������������������������������������������������������������������������������������������������� 4
Bottom View ���������������������������������������������������������������������������������������������������������������������������� 4
Installation Instructions ��������������������������������������������������������������������������������������������������5
Step 1: Prepare for Installation ����������������������������������������������������������������������������������������������5
Step 2: Bench-test Conguration ������������������������������������������������������������������������������������������� 6
Install Cable Connections ������������������������������������������������������������������������������������������������������������������ 6
Install Touch Screen Driver ���������������������������������������������������������������������������������������������������������������� 7
Step 3: Install into Panel �������������������������������������������������������������������������������������������������������� 9
Video Settings ���������������������������������������������������������������������������������������������������������������� 11
Setting the Timing Mode ������������������������������������������������������������������������������������������������������� 11
Control Panel Buttons �����������������������������������������������������������������������������������������������������������12
On-Screen Display (OSD) Menus ����������������������������������������������������������������������������������������� 14
Brightness & Contrast Menu ������������������������������������������������������������������������������������������������������������ 15
Auto Adjust Menu ����������������������������������������������������������������������������������������������������������������������������� 15
Input Source Menu ��������������������������������������������������������������������������������������������������������������������������� 15
Color Settings Menu������������������������������������������������������������������������������������������������������������������������� 16
Image Modes Menu ������������������������������������������������������������������������������������������������������������������������� 17
Display Settings Menu ��������������������������������������������������������������������������������������������������������������������� 19
Menu Settings Menu ������������������������������������������������������������������������������������������������������������������������ 21
PIP Settings Menu ��������������������������������������������������������������������������������������������������������������������������� 22
Cleaning Instructions ����������������������������������������������������������������������������������������������������24
Troubleshooting ������������������������������������������������������������������������������������������������������������25
Video Troubleshooting ���������������������������������������������������������������������������������������������������������� 25
Touch Screen Troubleshooting ��������������������������������������������������������������������������������������������� 27
Specications ����������������������������������������������������������������������������������������������������������������28
Display ���������������������������������������������������������������������������������������������������������������������������������� 28
Electrical �������������������������������������������������������������������������������������������������������������������������������28
Functional �����������������������������������������������������������������������������������������������������������������������������28
Video ������������������������������������������������������������������������������������������������������������������������������������� 29
Environmental �����������������������������������������������������������������������������������������������������������������������29
Physical ��������������������������������������������������������������������������������������������������������������������������������30
Compliances and Certications �������������������������������������������������������������������������������������������� 30
Warranty Statement �������������������������������������������������������������������������������������������������������31

Safety and Regulatory Information
ML20B User Manual, January 2015 3
To prevent re or shock hazard, do not expose live components to rain or moisture�
Dangerously high voltages are present inside the unit� Do not disassemble the unit�
Refer servicing to qualied personnel only�
This equipment is not intended for use in critical applications where its failure
to operate would create immediate life threatening circumstances� Applications
including, but not limited to, nuclear reactor control, aerospace navigation systems
and life support systems are not appropriate for this product�
This product is intended to be mounted in a suitable cabinet or other enclosure�
The NEMA 4, 4X, or 12 ratings are applicable only when properly installed in a like
rated enclosure�
FCC Notice
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules� These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment� This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications� Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense� Any changes or modications not
expressly approved by the grantee of this device could void the user’s authority to operate
the device�
Safety and Regulatory Information
WARNING!
!
Waste Electrical and Electronic Equipment Directive (WEEE)
The following information is only for EU-member states:
The mark shown to the right is in compliance with the Waste Electrical and
Electronic Equipment Directive 2002/96/EC (WEEE)�
The mark indicates the requirement NOT to dispose of the equipment as
unsorted municipal waste, but use the return and collection systems according to local law�
Users should contact their supplier and check the terms and conditions of the purchase
contract� When purchased directly from Hope Industrial Systems, you may contact
technical support for disposal arrangements�

Mechanical Drawings
4 ML20B User Manual, January 2015
Mechanical Drawings
Front and Side Views
Bottom View
7.1 mm
(0.28")
398.8 mm
(15.70")
482.6 mm
(19.00")
409.2 mm
(16.11")
307.6 mm
(12.11")
482.6 mm
(19.00")
7.1 mm
(0.28")
428.5 mm
(16.87") 69.6 mm
(2.74")
(Design to maximum depth
of 74.0 mm to ensure future
compatibility with later revisions
and replacement units.)

Installation Instructions
ML20B User Manual, January 2015 5
Installation Instructions
Step 1: Prepare for Installation
IMPORTANT!
Perform the following steps BEFORE installation of the monitor into the panel�
1� Ensure that sufcient power is available�
2� Ensure that sufcient space is available to allow for proper air ow into and out of the
unit�
3� Ensure that the air temperature around the unit (top and bottom) will not exceed the
rated specications of the unit.
fThe maximum rated temperature for the HIS-ML20 is 50°C (122°F)�
fRemember that heat rises – the temperature at the top of the
cabinet will be much hotter than at the bottom if air inside the
enclosure is not actively circulating� Even in a sealed enclosure,
use of a circulation fan can greatly reduce temperature�
fAlso, remember that even though this product is designed to
operate at 50°C, the life span of any electronic device is shortened
when it is consistently operated at high temperatures� Therefore,
it is wise to take steps to keep the temperature of the ambient air
around the unit as low as possible�
4� Ensure that the ambient humidity of the air around the unit does not exceed the
specications of the unit.
fThe maximum rated humidity for the HIS-ML20 is 90%
non-condensing�
!

Installation Instructions
6 ML20B User Manual, January 2015
Step 2: Bench-test Conguration
Make sure everything works before installing into the production environment�
TIP!
If using a KVM extender, please refer to the installation instructions included
with the KVM extender module� It is particularly important to bench-test the full
conguration prior to nal installation� This will help to identify and troubleshoot
any system issues while conguration changes may still be easily made�
Install Cable Connections
All monitors are shipped with both a 6 ft� (1�8 m) VGA video cable and 6 ft� (1�8 m) power cable,
unless longer cables were ordered in their place� If you ordered a touch screen monitor, you also
received a 6 ft� (1�8 m) USB cable, unless a longer cable was ordered in its place� Serial
(RS-232) cables may be ordered separately�
The cable ports are located on the rear of the monitor� Refer to the following diagram and
instructions to connect power, video, and touch screen (if applicable) to your monitor�
Video Connection
The HIS-ML20 supports analog and digital video� The HIS-ML20 also includes Composite and
S-Video input ports for NTSC/PAL video signals�
Analog VGA Video Connection
Connect one end of the VGA video cable to the HD-15 input port on the rear of the
DIGITAL VIDEO
USB
(for Touch Screen option)
SERIAL
(RS-232)
POWER INPUT ANALOG VIDEO
COMPOSITE VIDEO S-VIDEO

Installation Instructions
ML20B User Manual, January 2015 7
monitor� Connect the other end to the analog video output port on the host computer�
Digital DVI Video Connection
Connect one end of the DVI video cable to the DVI-D input port on the rear of the
monitor� Connect the other end to the digital video output port on the host computer�
TIP!
If the video source has an HDMI or DisplayPort connection, this can be converted to
DVI with a simple adapter� Contact Hope Industrial Systems for more information�
Power Connection
The HIS-ML20 is powered by 100 to 240 VAC, 0�8/0�4 A, 60/50 Hz�
Connect the AC power cable to the power input port on the rear of the monitor� Connect the other
end into a nearby outlet�
Install Touch Screen Driver
Applies to touch screen monitors only� Instructions below apply to Windows systems� Both USB
and Serial ports are present on all touch screen monitors, but only one should be used to connect
the touch screen interface to the monitor�
All touch screen monitors are shipped with a CD-ROM that contains documentation and drivers
for all major operating systems� To be sure that you have the most current information, please
check the following Internet address:
http://www�HopeIndustrial�com/Touchscreen_Drivers�htm
IMPORTANT!
If you will be using a USB connection, install the touch screen driver rst, and then
connect the USB cable� If you will be using a Serial connection, connect the Serial
cable rst, and then install the touch screen driver�

Installation Instructions
8 ML20B User Manual, January 2015
USB Connection
1� Select the appropriate driver for your operating system�
a� If downloading from the web address listed above, select the appropriate
driver for your operating system�
b� If using the included CD, insert it into the host computer's CD-ROM drive�
If the CD does not automatically run, browse the contents of the CD and
open the READ�ME�FIRST�htm le in a web browser� Select the appropriate
driver�
2� Click to "Run" the software when prompted� Follow on-screen instructions to
download and execute the touch screen driver installation�
3� A cable retention bracket comes installed on the USB port on the rear of the monitor
and will help to secure the cable and ensure adequate strain relief� Without removing
the bracket, route one end of the USB cable through the retention bracket and
connect it to the USB input port on the monitor� Connect the other end to the USB
port on the host computer�
Serial (RS-232) Connection
1� Connect one end of the Serial cable to the Serial input port on the rear of the monitor�
Connect the other end to the Serial port on the host computer� Tighten the captive
screws on the cable connectors to ensure adequate strain relief�
2� Select the appropriate driver for your operating system�
a� If downloading from the web address listed above, select the appropriate
driver for your operating system�
b� If using the included CD, insert it into the host computer's CD-ROM drive�
If the CD does not automatically run, browse the contents of the CD and
open the READ�ME�FIRST�htm le in a web browser� Select the appropriate
driver�
3� Click to "Run" the software when prompted� Follow on-screen instructions to
download and execute the touch screen driver installation�
Calibrate the Touch Screen
Once the driver has nished installing, you are ready to calibrate the touch screen�
Open the touch screen's Control Panel by clicking on the "Elo Touchscreen" icon,
located in the host computer's Control Panel� Under the "General" tab, click the
"Align" button to start the calibration routine�

Installation Instructions
ML20B User Manual, January 2015 9
1� Refer to the drawing below for the cutout dimensions for the HIS-ML20�
2�
366.8 mm
(14.44")
453.4 mm
(17.85")
Locate position in panel for mounting of the monitor� Ensure that there is adequate
space behind the panel� Allow extra space – 25�4 mm (1�0") behind and on each
side – for air ventilation�
Step 3: Install into Panel
Once you have completed the full bench-test conguration and conrmed that all components are
working properly, you are ready to install the monitor into its panel cutout�
WARNING!
Hope Industrial Systems will not assume liability for damage to internal electronics
due to improper installation� Contact Hope Industrial Systems if you need additional
assistance�
!

Installation Instructions
10 ML20B User Manual, January 2015
3� Cut a rectangular hole in the panel�
fCutout Dimensions (W x H) for the HIS-ML20:
453�4 mm x 366�8 mm (17�85" x 14�44"); ± 0�5 mm (0�020")
4� Clean and deburr the panel hole�
5� Separate the rear collar from the monitor by removing the 12 nuts�
6� Refer to the enclosure mounting diagram below�
7� Insert the unit into the front of the panel and re-attach the collar�
NOTE: Contact Hope Industrial Systems if for any reason your application does
not allow for installation of the collar�
8� Tighten all 12 nuts to a torque of 10-15 inch-pounds to ensure a watertight seal
between the bezel gasket on the monitor and the equipment panel� Go around all
nuts twice to ensure an even compression on gasket�
NOTE: If a torque wrench is not available, tighten all nuts evenly until bezel sits
1�6 to 2�4 mm (1/16" to 3/32") off the front of the panel�
Indice
Altri manuali HIS Monitor

HIS
HIS HIS-ML17-H Series Manuale utente

HIS
HIS HIS-ML20 C Series Manuale utente

HIS
HIS HIS-RL19.5 A Series Manuale utente

HIS
HIS HIS-ML19-***E Manuale utente

HIS
HIS HIS-RL17 H Series Manuale utente

HIS
HIS HIS-ML19- *** G Manuale utente

HIS
HIS HIS-ML15 Manuale utente

HIS
HIS HIS-UM23.8 Series Manuale utente

HIS
HIS HIS-ML23.8 A Series Manuale utente

HIS
HIS HIS-UM19.5-***A Manuale utente























