Hitachi MPH-210RI Manuale utente

Thank you for purchasing Hitachi gas table. Please read this operating instruction manual

carefully before using this gas table properly. We hope you are satisfied with our product.

CONTENTS

n NAME OF PARTS .............................................1

INSTALLATION OF GAS TABLE and ........ 3

HOW TO USE

SPECIAL CAUTIONS AND SPECIFICATIONS .............................................2

PREPARING THE UNIT FOR USE,

......................................

MAINTENANCE AND CARE and TROUBLESHOOTING ..............................................4

1. Top plate

2. Burner head (big)

5. Burner head (small)

6. Ignition (ON/OFF) knob

3. Trivet & tray (big)

4. Trivet & tray (small)

MPH-310RI

MPH-210RI

1. Top plate

2. Burner head (big)

3. Trivet & tray (big)

4. Ignition (ON/OFF) knob

IM # MPH-210RI-310RI(16.07)

INSTRUCTION MANUAL

1. Use only Liquefied Petroleum (LP) gas.

2. Use this gas table only for cooking. Never

use the gas table to dry clothes, and etc.

3. Do not use any small cooking utensil that may cover

the burner flame and thereby extinguish it.

4. Do not use any large cooking utensil which covers the

entire surface of the gas table.

5. Place the gas table in an area with sufficient ventilation.

SPECIFICATIONS

6. If the gas table is used for a long time in a closed space,

oxygen in the air becomes deficient, and there is a danger of

carbon monoxide poisoning due to incomplete combustion.

7. Use only rubber hoses. Do not use vinyl hoses. Vinyl is

not heat resistant and has poor elasticity.

8. When turning on a burner, make sure that the flame

catches completely. Also, make sure that flame is fully

extinguished when you turn off the unit. Even during use,

make sure the flame is burning normally.

9. Do not use a worn-out rubber hose. Old hoses are not

sufficiently elastic, and cracks

due to use may result in gas

leaks. Immediately replace

rubber hose when it gets

damaged or cracked.

10. Trivet, top plate and other parts become hot during

use. Therefore, touch no part of the gas table except the

ON/OFF knobs.

11.Take note that no boiling water should spill onto the gas

table’s top surface.

12. If you notice gas leakage, stop using the gas table at

once, close the gas stopcock, and open all windows and

doors to allow the gas to escape.

13. In case of a gas leak, NEVER turn on the gas table, or

turn on or off ventilation fan or any other electric

appliances. The gas may catch fire and cause an

explosion.

14. Do not leave the gas table unattended when on. After

use, never fail to turn the ON/OFF knob to the “OFF”

position and to switch off the gas stopcock. Also, make

sure that the flame is completely extinguished. When you

go out or when you go to sleep, always make sure to switch

off the gas stopcock.

The appropriate gas pressure range for this product is

25 0 ~350 mm H O

Small

Max

Med

External dimensions

(Height) (Length) (Width): mm

: inch

Gas consumption

Kcal/h (PB)

Gas pressure

300 mm WC

MPH-210RI

152 x 717 x 392

6.0 x 28.2 x 15.4

4.1

3300

Piezo-electric

MPH-310RI

4.6

3300

700

Piezo-electric

3300 3300

152 x 717 x 392

6.0 x 28.2 x 15.4

MODEL NO.

ITEM

Weight : Kg

Right

Left

Center

Ignition system

Gas inlet 9.5 mm(3/8 ) rubber hose*9.5 mm(3/8 ) rubber hose*

1. Installation of rubber legs.

Attach the rubber legs to the table by screwing them into the

openings on the table bottom.

2. Installation of ON/OFF knobs, burner heads and trivet & trays.

Place the ON/OFF knob on the gas cook axis and push it firmly

inwards. Set the burner head on the burn body, then place the trivet

& trays on the top plate.

For MPH-310RI, there are two types of trivet & trays and burner

head, respectively. The small trivet & tray and small burner head

should be installed at the center.

Ignition (ON/OFF)

knob

Trivet & tray

1. Install the gas table securing a minimum clearance of

15 cm from the side/back wall and 100cm from the

ceiling.

2. Connect the rubber hose to the gas cylinder

3. Make sure there is no dust on the gas inlet pipe and fit

the rubber hose over the gas inlet pipe, making sure the

end of the hose reaches the line as shown. Fasten the

hose securely with a hose clamp.

Gas inlet pipe Rubber hose Hose clamp

l Do not route the rubber hose under

the gas table.

Do not place any objects that may

easily be blown away by the wind on

the gas table.

lNever use one single rubber hose

for two gas tables.

Keep away flammable material /

liquid from the gas table.

Make sure that all knobs of the gas table at the “OFF” position, and open fully the gas stopcock of gas cylinder.

1. Ignition and Flame Adjustment

Push the knob fully and turn counterclockwise to “ON”.

Flame is adjustable between “ON” and “OFF” position

and also between “ON” and position by turning the

knob slowly. Flame is at its highest at “ON” position and

is medium at position.

Push fully

Small

Max

Med

Igniting the burner for the first time may be difficult because of air trapped in the gas hose. Repeat the ignition

procedure several times until the air is purged and the burner is ignited.

2. Extinction

Turn the ignition knob to the “OFF” position. In this position, no gas is supplied and the flame goes out.

Burner head

Rubber leg

Note

Turn counter-clockwise

Good combustion

Short supply of air Oversupply of air Oversupply of air

Damper Damper location

Note

MAINTENANCE AND CARE

Note

TROUBLESHOOTING

When fire extinction sound is loud, adjust air supply by turning Damper upward or downward.

If the burner and its surrounding parts get too dirty, incomplete combustion may result. Therefore, clean these

parts carefully.

3. Air-Adjustment

For good flame, turn Damper upward and downward until the flame is in

a “good combustion” stated as shown in the illustration. For the center

burner of MPH-310RI, there is no air-adjustment Damper.

1. Cleaning of the burner head and burner top surface. Each

time liquid boils over and falls onto the burner, remove the

burner head and clean it and its top surface with a brush.

When returning the cleaned burner head to the burner, make

sure to set it correctly.

2. Cleaning of the trivet & tray

Always keep the trivet & tray clean.

3. Cleaning of the electrodes of the igniter. If the electrodes are

soiled, clean them with a dry cloth as dust adhering these

parts may prevent a good ignition.

Make sure that the burner body, burner head, trivet and other parts are set properly after cleaning.

If trouble occurs, fix it referring to the following table. If the problem still remains, or in case a serious malfunction, or if you

are in doubt, take the table to the retailer from which you bought the unit, without trying to repair it yourself.

Trouble Cause Remedial measure

Does not ignite

Smell of gas

Flame makes loud

cracking sound while

burning

- Main gas stopcock is not open.

- Air remains in the gas piping.

- Dirty electrode or insulator.

- Bent or crushed rubber hose.

- Make sure the ignition knob is at “OFF” position, then

open the main gas cock fully.

- Repeat igniting operation until all air in the piping is

completely purged.

- Clean it with a dry rag.

- Straighten gas hose.

- Cracks or holes in the rubber hose.

- Rubber hose not connected well.

- Failure or the gas table cock.

- Replace it with a new one.

- Connect gas hose surely.

- Ask the store for repairs.

- Air supply is not properly adjusted.

- Flame outlet of burner is closed.

- Burner is not fitted properly.

- Nozzle is clogged.

- Adjust it properly.

- Clean the clogged part.

- Fix burner body properly.

- Ask the store for repairs.

Questo manuale è adatto per i seguenti modelli

Altri manuali Hitachi Fornello

Hitachi

Hitachi MPH-110RI Manuale utente

Manuali Fornello popolari di altre marche

Modena

Modena FC 7645 SGM Manuale del proprietario

Electrolux

Electrolux Insight EKG6049 Manuale utente

Stanley

Stanley Donard 60 Manuale utente

Bartscher

Bartscher 201TC Manuale utente

Parkinson Cowan

Parkinson Cowan 50 GR/BU Manuale utente

Siemens

Siemens HK9P00020U Manuale utente

Creda

Creda S150E Guida

Creda

Creda HB48309 Manuale utente

Bosch

Bosch HCE743220F Manuale utente

Tricity Bendix

Tricity Bendix SE545P Manuale utente

NEFF

NEFF E1461A2/01 Manuale utente

Zanussi

Zanussi ZCM 700 X Manuale utente

Smeg

Smeg SNL61MA9 Manuale utente

RiverGrille

RiverGrille TF2002501-RG Manuale utente

Vollrath

Vollrath 69504F Manuale utente

Tricity Bendix

Tricity Bendix CSIE500 Manuale utente

AEG

AEG Competence 5731 V Manuale utente

Euromaid

Euromaid ES60 Manuale utente