Hitachi DDC 35N Manuale utente
Quick
Guide
© 1999 Hitachi Koki Imaging Solutions, Inc.
1757 Tapo Canyon Road
Simi Valley, CA 93063
December 1999
336859-001, Revision A
© 1999 Hitachi Koki Imaging Solutions, Inc. All rights reserved.
No part of this document may be reproduced without the
expressed permission of Hitachi Koki Imaging Solutions, Inc.
The material in this document is for informational purposes and
is subject to change without notice. Hitachi Koki Imaging
Solutions, Inc. assumes no responsibility for errors or
omissions in this document. No liability is assumed for any
damages resulting from the use of the information it contains.
TRADEMARK
Digital Document Copier, DDC, DDC 35n, and their associated
logo marks, are trademarks of Hitachi Koki Imaging Solutions,
Inc.
Hitachi and the Hitachi logo are trademarks of Hitachi, Ltd. All
rights reserved.
All other terms and product names may be trademarks or
registered trademarks of their respective owners, and are
hereby acknowledged.
NOTICE TO USER
In an effort to meet the demands of a rapidly changing
technology, the manufacturer is continually developing new
features and functions to meet your changing printing or printer
needs. As a result, this manual may not exactly reflect future
changes made to the product. Please be sure to consult all
manual updates or addenda when using this product’s
documentation.
Contents
◆Using Control Panel keys. . . . . . . . . . . . . . . . . . . . . 1
◆Making Copies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
◆Loading Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
◆Replenishing the Toner . . . . . . . . . . . . . . . . . . . . . 16
◆Replacing the Staple Cartridge . . . . . . . . . . . . . . . 18
◆Clearing Misfed Paper . . . . . . . . . . . . . . . . . . . . . . 20
◆Clearing a Staple Misfeed . . . . . . . . . . . . . . . . . . . 31
1
Touch Panel
•Shows various screens and messages.
10-key Pad
•Use to enter the number of copies to be
made and the various numeric values.
Clear Key
Press to :
•Reset the multi-copy entry to 1.
•Clear the settings entered from the
10-key Pad and the access code entered.
•Clear the image data scanned.
Panel Reset Key
•Press to set the copier into the initial
mode.
Stop Key
Press to :
•Stop a print cycle.
•Stop a scanning cycle.
Start Key
•Press to start the document scanning
sequence or print cycle.
•Lights up green to accept a print
command; lights up orange to reject
one.
2
3
4
1166O239DA
5
1
6
1
2
3
4
5
6
Using Control Panel Keys
2
Placing Originals on the Glass
RaisetheOriginalCoverorDocumentFeeder
and place the original face down on the Glass.
1
1166O027AA
Align the rear right corner of the original with
the marker on the Width Scale of the
original glass. Gently lower the Original
Cover or Document Feeder.
2
1166O192AA
From the 10-Key Pad, set the desired number
of copies to be made.
If you want to use the auxiliary functions, touch
,,orthe
Key and set the appropriate functions.
3
Orig. Copy
▼
Density Auxiliary
1166O030AA
Press the Start key.
4
1166O245DA
Making Copies
3
Using the Document Feeder
Slide the Document Guide Plate to the size of
the originals.
When using large size originals, flip up the
Extenders.
1
1166O022AA
Extender
Load a neat stack of originals face up on the
Document Feed Tray.
Make sure that the top level of the original stack
does not exceed the ▼marking.
2
1166O024AC
From the 10-Key Pad, set the desired number
of copies to be made.
<Using the Single Automatic Document
Feeding Mode (SADF Mode)>
Open the Single Document Feed Tray, slide
the Guide Plate to the size of the original and
insert the original face down into the Tray.
If you want to use the auxiliary functions, touch
,,orthe
Key and set the appropriate functions.
The original is automatically taken up and the
copy cycle is started.
3
Orig. Copy
▼
Density Auxiliary
1166O026AB
1166O030AA
4
Using the Manual Bypass Tray (For Metric Area)
Open the Manual Bypass Tray.
1
1166O193AA
Slide the Paper Guides to the size of the copy
paper and insert a sheet of paper.
The paper will be copied on the side facing
down.
2
116O032AB
Select the desired copy paper size.
If the copy paper is a non-standard size, touch
.
3
Custom Size
1168P009DC
Touch and select the type of
paper.
When you use labels, touch .
4
OHP/Card
Card
1168P010DC
Touch and press the Start key.
The copier automatically starts the copy
cycle when the paper is inserted into the
Manual Bypass Tray after the first copy.
5Enter
1166O245DA
5
<Using Inch Size Paper>
When you want to use inch size paper, touch
on the screen given in step 3 and you
have a screen that allows you to select an inch
paper size.
1
Inch
1168P012DC
<Using Nonstandard Size Paper>
Whenyouusea nonstandardsize paper, touch
.
1
Custom Size
1168P013DC
Touch and enter the size from the 10-key
Pad. Touch and enter the size from the
10-key Pad.
To correct a ratio, press the key.
2XY
C
1168P014DC
6
Using the Manual Bypass Tray (For Inch Area)
Open the Manual Bypass Tray.
1
1166O193AA
Slide the Paper Guides to the size of the copy
paper and insert a sheet of paper.
The paper will be copied on the side facing
down.
2
116O032AB
Select the desired copy paper size.
If the copy paper is a non-standard size, touch
.
3
Custom Size
1170P009EC
Touch and select the type of
paper.
When you use labels, touch .
4
OHP/Card
Card
1170P010EC
Touch and press the Start key.
The copier automatically starts the copy
cycle when the paper is inserted into the
Manual Bypass Tray after the first copy.
5Enter
1166O245DA
Altri manuali per DDC 35N
1
Indice
Altri manuali Hitachi Fotocopiatrice
