Hobo MicroRX RX210 Series Manuale di istruzioni

Installing a Micro SIM Card in a HOBO® MicroRX (RX210x) Station

23845-E

Requirements:

•HOBO RX2100 MicroRX Station

•USB cable

•One of the following:

HOBOconnect version 1.5 or higher

HOBOware® version 3.7.23 or earlier

•User-provided data plan and SIM requirements:

Micro SIM for 4G LTE Network; supports UMTS/HSPA+ at 800, 850, 900, 1800, 1900, or 2100 MHz and LTE at 700,

800, 850, 900, 1800, 1900, 2100, or 2600 MHz

The SIM must already be activated and unlocked.

APN for the associated carrier

To install a SIM card:

1. Make sure the station is powered down. Unplug the battery cable and the solar panel cable and AC adapter (if

applicable).

2. Carefully slide the micro SIM card into the SIM port and gently push it into place (it makes an

audible click when it is properly seated).

Battery disconnected;

no charging device

plugged in

Installing a Micro SIM Card in a HOBO MicroRX (RX210x) Station

U.S. and International Sales: 1-508-759-9500 2 www.onsetcomp.com

3. Plug in the battery and any charging device (if applicable). The LCD displays the message Initializing System while the

system powers up. Wait until you see a checkmark next to System.

4. Connect the station to the computer with a USB cable. It may take a few minutes for the device driver to be installed

on Windows® if this is the first time connecting the device to the computer.

If you are using HOBOconnect:

1. Open HOBOconnect.

2. Select the tile for your logger.

3. Select Configure Connection.

Micro SIM installed

U.S. and International Sales: 1-508-759-9500 3 www.onsetcomp.com

4. Under Cellular Configuration, enter the APN for the SIM card. You can also enter a username and password.

If you are using HOBOware:

1. Open HOBOware.

2. From the Device menu, select Manage RX Station. Note for Windows: You may see a warning that Windows Firewall

has blocked some features. Select Domain networks and click Allow Access.

3. In the RX Station Manager, click the Actions button circled below and select Network Access.

4. Enter the APN for the SIM card. You can also enter a username, password, and phone number as needed.

5. Click Save and then click Done.

6. Click Close in the RX Station Manager.

7. Disconnect the USB cable from the station and unplug the battery cable and the solar panel cable and AC adapter (if

applicable).

U.S. and International Sales: 1-508-759-9500 4 www.onsetcomp.com

8. Once the LCD is blank, plug in the battery and any charging device (if applicable). The LCD displays the message

Initializing System while the system powers up. Wait until you see a checkmark next to System. Your station should

now be ready to connect with HOBOlink®.

•For details on setting up and configuring RX2101, RX2102, RX2103, and RX2104 stations, refer to

www.onsetcomp.com/support/manuals/23808-rx2100-manual.

•For details on setting up and configuring RX2105 and RX2106 stations, refer to

www.onsetcomp.com/support/manuals/24500-rx2105-and-rx2106-manual.

Altri manuali per MicroRX RX210 Series

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Registratore di dati popolari di altre marche

TESTO

TESTO 176 Manuale utente

HT Italia

HT Italia XL421 Manuale utente

HBM

HBM SOMAT XR CX22B-R Manuale utente

Agtrix

Agtrix 380i Manuale utente

Beijing ART Tech

Beijing ART Tech PCI2320 Manuale utente

Athena

Athena GET SL1 Manuale utente

Motec Systems

Motec Systems C185 Manuale utente

Beijing ART Tech

Beijing ART Tech USB2832 Manuale utente

Rotronic

Rotronic HygroLog HL20 Manuale utente

MRC

MRC DW-6092 Manuale utente

Racelogic

Racelogic VBOX LapTimer Manuale utente

Edu-Logger

Edu-Logger 900-240 Manuale utente

Elma

Elma DT173 Manuale utente

MadgeTech

MadgeTech PRTemp140 Scheda tecnica

Comet

Comet U0121M Manuale utente

pico Technology

pico Technology PT-104 Manuale utente

Soil Instruments

Soil Instruments GTecLink Manuale utente

APLICOM

APLICOM A11 Manuale utente