Holemaker Technology HMT MAX 200 Manuale utente
HMT MAX 200
MAGNETIC DRILLING MACHINE
OPERATING INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE
This MAX 200 Machine
(Serial No____________) is CE Approved.
HOLEMAKER TECHNOLOGY LTD.
Bridge House, Pattenden Lane, Marden, Kent, UK,
TN12 9QJ
TEL: 03330 110 382
MAX200 V.1_05/2019
Contents
1. Before Use
1.1 Operating Guide
1.2 Safety Regulations
1.3 Warning Symbols
1.4 Specification Plate
2. Features
2.1 Functionsof the Machine
2.2 Technical Data
2.3 Machine Dimensions
3. Overview
3.1 Machine Features
3.2 Operating Positions
3.3 Correct Usage
3.4 Power Supply
3.5 Power Connection
3.6 Safety Devices
3.7 Machine Packaging
1
1
1
3
4
5
5
5
6
7
7
7
8
9
9
9
10
Contents
4. Operation
4.1 Operation Procedure
4.2 Control Panel
4.3 Emergency Stop
4.4 Adjustment of the Machine
5. Electrical Safety
5.1 General Electrical Safety Regulations
5.2 Wiring Diagram
6. Maintenance
6.1 General Maintenance
7. Trouble Shooting
8. Appendix 1 Exploded View
Appendix 2. Exploded View 2
Appendix 3. PartsLists
11
11
13
14
14
15
15
16
17
17
18
19
20
21
1
1. Before Use.
1.1 Operating Guide.
Read this manual carefully and understand all the requirements
fully before operating this machine, or serious injuries may result.
Please contact Holemaker Technology or your local distributor
immediately if there are any items missing or the machine is not in full
working order upon delivery.
Holemaker Technology or the distributors are not obliged to repair
or replace any part that has been damaged by careless
operation, misuse for any reasons, such as: poor lubrication,
inadequate maintenance, inappropriate operation environment or
improper operation.
1.2 Safety Regulations.
◎To maintain workplace safety, working regulations should be
observed by all personnel present in the workplace.
◎The workplace should be clean and tidy.
◎Do not expose the machine to dangerous environmental elements
not intended for its operation.
◎Provide sufficient light in the workplace.
2
◎Do not use with a Pacemaker or other implanted medical devices.
Electromagnetism can cause damage/interference.
◎
Cleaning, greasing, general maintenance and other adjustments
should only
be made to the machine when the power cable is removed.
◎Servicing should only be carried out by a qualified technician.
◎Do not leave the machine unattended while running.
◎The magnetic base should always be secured by the safety strap in case
of power loss.
◎The use of cutting lubricant is recommended during the drilling process.
◎Make sure the tool is intended for the job.
◎Electro- Magnetic Drilling Machines should only be used by skilled
person(s).
◎Follow all Safety Regulations at all times when operating this machine.
General warning
Read the manual
Use safety glasses
Use earplugs
Wear safety shoes
Wear appropriate work clothes
3
1.3 Warning Symbols
To ensure safe & proper operation, there are six symbols showing on
the machine and are explained below. Do not remove warning
symbols from the machine.
Warning Symbols:
200
General warning
Read the manual
Use safety glasses
Use earplugs
Wear safety shoes
Wear appropriate work clothes
4
1.4 Specification Plate
7
HMT MAX 200
200
5
2.2 Technical Data.
2. Features.
2.1 Functionsof the Machine.
1. Highly efficient and stable drilling, offering precision results.
2. Variable speed functions, for both drilling and countersinking.
3. Internal protected coolant feed system.
4. Powerful and durable motor with long life expectancy.
5. Waterproof and dust proof switchgear, ensuring safety & reliability.
6. Emergency stop function.
7. Current Overload protection.
8. Reversible Capstan arm,can be fixed on both sides of the machine.
9. Control panel assembly can be fixed on both sides of the machine.
10. High power Electro-Magnetic Base for cutting stability.
Power Input
Voltage
RPM
Core Drill
Max Cutting Depth
Twist Drill
Tool Holder
Magnetic Adhesion
Weight
Technical Data MAX 200
3600W
230V/50H/z
110V/60H/z
Two Speed
High 410/170
Low 150/70
Φ12mm - Φ200mm
110mm
up to Φ44mm with Morse Taper
MT4
3900kg
53kg
110
mm
260 mm
2.3 Machine Dimensions.
6
330 mm
505 mm
60 mm
660-840 mm
660 mm
115 mm
1
7
5
6
4
2
3
8
7
3. Overview.
3.1 Machine Features.
3.2 Operating Positions.
1. Body
2. Motor
3. Gearbox
4. Magnet
5. Control panel assembly
6. Main cable assembly
7. Oil bottle assembly
8. Capstan arm
Indice
Altri manuali Holemaker Technology Trapano
Holemaker Technology
Holemaker Technology VERSADRIVE V60T Manuale utente
Holemaker Technology
Holemaker Technology RTQ 40 Manuale utente
Holemaker Technology
Holemaker Technology MAX40V Manuale utente
Holemaker Technology
Holemaker Technology HMT MAX30 Manuale utente
Holemaker Technology
Holemaker Technology MAX50T Manuale utente
Holemaker Technology
Holemaker Technology VERSADRIVE V125T Manuale utente
