HOLMET mottimaster S Manuale utente
Table of contents
1. GENERAL INFORMATION ......................................................................................................3
2. EC DECLARATION OF CONFORMITY .................................................................................4
3. OPERATION AND MAINTENANCE MANUAL ....................................................................5
4. TRANSPORTING, OPERATING AND STORING...................................................................6
Transporting.....................................................................................................................................6
Storing..............................................................................................................................................6
Commencing operation....................................................................................................................6
Operating the machine .....................................................................................................................7
Starting the machine.....................................................................................................................7
Reversing the machine.................................................................................................................7
Stopping the machine...................................................................................................................8
5. MAINTENANCE AND ADJUSTMENT INSTRUCTIONS......................................................9
Maintenance targets .........................................................................................................................9
Daily maintenance............................................................................................................................9
Lubrication points ............................................................................................................................9
Adjusting blade clearance ..............................................................................................................10
Detaching the counter blade...........................................................................................................10
Detaching the cutting blades ..........................................................................................................10
6. CONVEYOR .............................................................................................................................11
Belt adjustment ..............................................................................................................................11
Detaching the conveyor .................................................................................................................11
7. SAFETY INSTRUCTIONS.......................................................................................................12
3
1. GENERAL INFORMATION
To the operator:
This device was designed and manufactured for processing firewood. Mottimaster S simultaneously
cuts and splits wood . The maximum diameter of wood to be processed is 22 cm.
With hard wood types, such as oak, rowan, beech, maple or similar, the maximum diameter is 15
cm. The length of the processed firewood can be adjusted to 25, 33, 40, 50 and 60 cm. Do not adjust
the length while the machine is running.
Before operating the device, the operator must study these instructions concerning the machine’s
structure, operation and maintenance. The device will perform safely and at optimal capacity when
it is used in accordance with the instructions in this manual.
The device is intended for outdoor use in conditions between -30 °C and +30 °C. Do not wash the
device with a pressure washer. If sufficient care is exercised, the machine can be washed by
splashing water on it.
These instructions were prepared to help the operator to remember the principles of
safe operation.
Important: After reading this manual, store it in a safe place for subsequent use.
Should you lose this manual, immediately order a new copy from the manufacturer.
4
2. EC DECLARATION OF CONFORMITY
HOLMET OY
Keskikankaantie 27, FI-15860 HOLLOLA, FINLAND hereby declares that the machine
Mottimaster S that has been brought to the market conforms to the Machinery Directive 98/37/EC,
to related amendments and to the applicable national decrees (Government Decree 1314/1994).
The following unified standards have been applied to the design of the machinery: SFS-EN ISO
12100.
Hollola, 1 April 2011
____________________________
Reima Niemeläinen
Factory Manager
5
3. OPERATION AND MAINTENANCE MANUAL
In this manual, safety-related issues are indicated with the following symbols.
Warning symbol
The text highlighted by this symbol always includes a safety-related warning.
Study the text carefully.
General caution symbol
The text highlighted by this symbol always includes information related to the safe operation and
maintenance of the device. Study the text carefully.
6
4. TRANSPORTING, OPERATING AND STORING
Transporting
The machine can be transported with the conveyor raised in the transport position. The machine
must not be towed on public roads, unless it is registered.
The conveyor must always be locked to the machine's body with a mechanical lock. Transporting
the machine by means of the winch or with the conveyor lowered is strictly prohibited. If necessary,
the device can also be lifted by the lifting lug.
The machine weighs 630 kg.
Storing
The device can be stored outdoors. For longer periods of storage, it is advisable to clean and
lubricate the machine and to cover it appropriately. Careful storage ensures that the machine lasts
longer and is easier to take back into use. When operation is initiated after a period of storage, the
machine must be subjected to an inspection, and any possible snow and ice must be removed before
starting the device. Special attention must be paid to the conveyor belt. Ensure that the belt has not
frozen to the base.
Commencing operation
Before beginning operation, study this operation and maintenance manual carefully.
Ensure that all guards (7 pcs) are in place.
Ensure that the machine’s screws are properly tightened.
Lubricate the machine according to the instructions.
The machine can be powered by mains electricity or by a sufficiently powerful generator. The
generator’s output must be suitable for the device. If necessary, ask the manufacturer for advice on
how to connect a suitable generator to the device. When the machine is in operation, it must be level
and supported by its wheels, the front wheel and the rear support.
7
Operating the machine
Position the device on a sturdy, solid base and ensure that it cannot move.
Before commencing operation, ensure that all guards are in place and all bolts and nuts have been
tightened. Before use, the operator must study this operation manual. The operator must ensure that
no children or other unauthorised people can access the working area during operation. The use of
protective gloves is recommended when operating the machine. Ensure that the clearance between
the cutting blade and the counter blades is no more than 2 mm. Feed timber into the machine
through the opening in the side by means of the feed roller. If necessary, you can split the wood into
four pieces by turning it 90º between cuts.
If the conveyor stops, switch off the machine and check the correct tension of the conveyor belt
according to the instructions.
During operation, ensure that the wood chips generated by the splitting process do not get near the
chains by regularly removing the wood chips that accumulate under the machine.
Neglecting to do so may damage the chain or sprocket. When feeding the last piece of wood and
where it is shorter than the length of the feed opening guard, release your grip on the wood when it
is being cut. The piece of wood may be pressed against the upper section of the guard.
Starting the machine
Turn the power switch to the ON position and press the START button to start the machine.
Reversing the machine
Reversing the machine is necessary, for example, if the machine gets jammed or it fails to cut the
wood properly. Before reversing the device, clear the conveyor of any possible wood as it may
damage the equipment.
•With the device stopped, turn the power switch ON and press the REVERSE button. The
device will only run in reverse for as long as the REVERSE button is pressed.
•When the device is running, press the STOP button and then hold down the REVERSE
button.
8
Stopping the machine
Press the emergency stop button or the stop button.
The conveyor moves 15 to 20 cm after the emergency stop button or the stop button
has been pressed.
In overload situations, the machine stops because the motor's circuit breaker trips. If this occurs,
wait approximately five minutes for the machine to cool down and for the circuit breaker to return
to normal status. The circuit breaker is restored automatically. If the circuit breaker does not trip
normally and the machine slowly stalls to a halt, check the following:
•If you are using ceramic disposable fuses, are all the fuses in the fuse panel
intact? You can check this by replacing the old fuses with ones that you know
are operational. Please note that poor fuse contact prevents the machine from
operating. If necessary, contact the manufacturer or a professional electrician
for assistance.
•The device requires 3 x 16A fuses. If ceramic fuses are used, the fuses must
have a slow tripping time.
•If you are using automatic fuses, have the fuse panel fuses tripped?
•Does the electrical system in your building have sufficient capacity? If several
suitable electrical sockets are available, try the one closest to the switchboard.
If the device works, there is something wrong with the electrical system.
Contact a professional electrician.
•The electrical cord you are using may be insufficient. If the conducting
distance is long (over 20 metres), the conductor surface must be increased.
•If your electrical system features fault current protection, it will most likely
trip because the Mottimaster S includes a short circuit motor. If your electrical
system includes fault current protection, contact an electrician to remedy the
problem.
In other situations or when you need information on the above problems, contact the manufacturer.
If wood begins to pile up inside the machine, the machine must be stopped before clearing the
blockage.
Indice
Manuali Spaccalegna popolari di altre marche
Scheppach
Scheppach OX 3-1000 Istruzioni per il montaggio
Swisher
Swisher 21200 Manuale utente
Elem Garden Technic
Elem Garden Technic FBHT65-22TCH Manuale utente
Champion Power Equipment
Champion Power Equipment 90720 Manuale
Boss Industrial
Boss Industrial ES5T20 Manuale utente
Villager
Villager LSP 12 T Manuale utente
