Holystone SPYDI Manuale utente
SPYDI
Instructions For Use V1.0
[email protected] (CA)
[email protected] (EU)
www.holystone.com
Gebrauchsanweisung
PMN：quadcopter
CONTENTS
Flight Functions27
APP Functions33
Stabilization Function48
Storage50
Product Functions
Package Contents01
Diagram of the Drone02
Diagram of the Transmitter03
Product Introduction
Specifications51
Contact Us53
General Information
Charging09
Pre-Flight Preparations11
Flight Environment Requirements15
Pre-Flight Checklist16
Flight17
Operation Guidance
Disclaimer & Warning54
Safety Guidelines54
Maintenance57
Recycle this Product57
Compliance Information58
Safety Instructions
62-119
Deutsch
01-61
English
On/Off：
Snap
1
Battery Level Indicators
2
Charging Port (Type-C)
3
Power Switch
4
Battery of the Drone
Turn the battery on/off by pressing the power switch for 3
seconds. When the battery is on, the battery level indicators
will display the current battery status. When the battery is
powered off, all the indicators are out.
1.1 Package Contents >> 1.2 Diagram of the Drone >>
01 02
1/PRODUCT INTRODUCTION PRODUCT INTRODUCTION /1
1
2
3
5
6
7
8
4
10
9
11
12
Propellers
4
Camera Cover
7
Drone Battery 10
Connection Cable
(type-C)
5
Connection Cable
(micro-USB)
8Connection Cable
(lightning)
11
Drone
1
Transmitter
2
Joysticks
3
USB Charging Cable
6
Screwdriver
9 12 Instructions For Use
Camera
1
Propeller
2
Motor
3
4Camera Cover
5Drone Status Indicator
6Optical Flow Module
Drone Battery
7
3
12
5
7
Drone
4
6
SPYDI
Instructions For Use
V1.0
www.holystone.com
Gebrauchsanweisung
1.3 Diagram of the Transmitter >>
03 04
1/PRODUCT INTRODUCTION PRODUCT INTRODUCTION /1
Front：Top：
Bottom：
Transmitter Functions
Cellphone Holder
1
Left Joystick
3
Take Photo
5LCD Screen
6
Connection Cable
7
Right Joystick
9Return to Home
10 Record Video
11
Zoom Dial
12 Connection Port
13 Camera Adjustment Dial
14
Cellphone Slot
15 Charging Port (Type-C）
16 Storage Slots for Joysticks
17
4
Check Battery Level : Short Press Power Switch: Short press, then hold
8
Takeoff/Landing: Short Press Emergency Stop: Long Press
Speed Switch: Short Press GPS Switch on/off: Long Press
2
1
5
7
6
8
9
14
15
2
12
10
11
13
16 17
1.3 Diagram of the Transmitter >>
05 06
1/PRODUCT INTRODUCTION PRODUCT INTRODUCTION /1
LCD Screen
23
4
GPS Signal StrengthTransmitter WiFi Signal
1Transmitter Battery Level
5Photo/Record Indicator 6Flight Speed
Transmitter Signal Strength
7 8 Drone Battery Level 9Flight Distance
Drone Status
10 11 Flight Speed 12 Ascend/Descend Speed
Flight Height
When the battery level of the transmitter is low, its icon ( ) will start to flash. When this hap-
pens, please bring the drone down to the ground immediately and charge the transmitter.
Left Joystick Right Joystick Left Joystick Right Joystick
Mode 2：(Left joystick as the throttle joystick)
Up
Down
Ascend
Descend
Left Right
Rotate Left Rotate Right
Up
Down
Forward
Backward
Left Right Fly to
Left Fly to
Right
1.3 Diagram of the Transmitter >>
07 08
1/PRODUCT INTRODUCTION PRODUCT INTRODUCTION /1
Joystick Mode Mode 1：(Right joystick as the throttle joystick)
Up
Down
Ascend
Descend
Left Right
Rotate Left Rotate Right
Up
Down
Forward
Backward
Left Right Fly to
Left
Fly to
Right
Hold the ( ) button, short press the ( ) button of the transmitter once, then hold
the latter until the transmitter quickly beeps 3 times. You will see “R HAND MODE” displayed
on the LCD screen, which means the transmitter is now in Mode 1.
2.1 Charging >>
09 10
2/OPERATION GUIDANCE OPERATION GUIDANCE /2
Power Bank
USB Adapter
(5V/2A)
· Before charging, please read the instructions in the "Safety Guidelines" carefully.
· Please use the original charging cable to charge the drone battery and transmitter.
· DO NOT charge the drone battery immediately after a flight as the temperature of the battery may
be too high. Please wait until it cools down to room temperature before charging again.
Insert the Type-C plug of the charging cable into the drone battery.
1
Plug the other end of the cable into a USB adapter (5V/2A) or power bank to start charging.
2
When the battery is charging, the battery level indicators will keep flashing. When it is fully
charged, all the indicators will be on.
3
It takes about 3 hours to fully charge a drone battery. A fully charged battery offers about 20
minutes of flight time.
4
Charging of the Drone Battery：
1
Insert the Type-C plug of the charging cable into the Type-C port of the transmitter.
1
Plug the other end of the cable into a USB adapter (5V/2A) or powerbank to start charging.
2
When charging, the cells in the battery level bar will light up in turn. The LCD screen displays
"CHARGING."When the charging is done, all 3 cells will light up and the LCD screen displays
"CHARGE DONE."
3
It takes about 2 hours to fully charge the transmitter. A fully charged transmitter offers about
2 hours of usage time.
4
Charging of the Transmitter：
2
①Download & Installation ②Camera Cover
The drone is equipped with a
Live-Feed function. Please scan the
corresponding QR-code above, and
download the "HS FLY" app to use
the related functions.
Required operating systems:
iOS 11.0 or above.
Android 5.1 or above.
Loosen the buckle on
the camera cover.
Gently pull the cover
up, then pull it toward
the front of the drone.
AB
Please remove the camera cover before you
turn on the drone.
2.2 Pre-Flight Preparations >> 2.2 Pre-Flight Preparations >>
11 12
2/OPERATION GUIDANCE OPERATION GUIDANCE /2
③Drone Battery ④Arms
· Please make sure that the battery is firmly installed.
Otherwise, the flight safety of your drone may be
affected. The drone may crash due to a power-cut
during the flight.
· Only install/remove the battery when it is powered off.
Push the battery into the
fuselage. Make sure you hear a
click when inserting the battery,
which indicates that it is
installed firmly.
Installation：
Press down on the snap and
pull the battery out of the
fuselage.
Remove：
All arms of the drone are
folded when it is packaged at
the factory. First, unfold the
front arms, then unfold the
rear arms.
Unfold the front arms
Unfold the rear arms
iOS Android APP on
Google play
⑤Propeller
Install the marked propellers to the marked
motor shafts. Use the screwdriver to tighten the
two screws in place. Install then the unmarked
propellers to the unmarked motor shafts.
Use the screwdriver to turn the screws
anti-clockwise to remove them. Then
pull the propellers up.
· The marked propellers have a different spin direction than the unmarked ones. So please ensure
that they are installed to the right motor shafts.
· Before each flight, check if the propellers are secure and tight.
· If the propellers become deformed or damaged, please replace them before flying again.
Installation：Remove：
marked
2.2 Pre-Flight Preparations >> 2.2 Pre-Flight Preparations >>
13 14
2/OPERATION GUIDANCE OPERATION GUIDANCE /2
⑥TF Card ⑦Joysticks
Insert a TF card (not included) into the TF card
slot before turning on the drone. This drone sup-
ports TF card with a max storage of 128GB.
Take the joysticks out of the storage
slot and mount them onto the
transmitter.
A
A
B
B
2.3 Flight Environment Requirements >> 2.4 Pre-Flight Checklist >>
15 16
2/OPERATION GUIDANCE OPERATION GUIDANCE /2
Fly in Open Areas
Maintain Line of Sight
Fly Below 394 ft
Make sure the transmitter, the
cellphone and the drone bat-
tery are fully charged.
Make sure the drone battery
and the propellers are
installed securely.
Make sure the drone arms are
fully expanded.
Make sure that there is noth-
ing obstructing the motors.
Make sure the camera cover
is removed.
Make sure you use HolyStone
accessories.
DO NOT use this drone in severe weather conditions
including heavy wind, rain, snow, fog, hail, or lighting.
Avoid flying over or near obstacles, crowds, high voltage
power lines, trees, airports or bodies of water.
Avoid flying near areas with magnetic or radio interfer-
ence, including as power lines, mobile base stations,
radar stations, and broadcasting towers.
Altri manuali Holystone Quadricottero
Holystone
Holystone F+ Series Manuale utente
Holystone
Holystone HS175D Manuale utente
Holystone
Holystone F181 Manuale utente
Holystone
Holystone F181G Manuale utente
Holystone
Holystone HS720G Manuale utente
Holystone
Holystone X401H-V2 Manuale utente
Holystone
Holystone F181G Manuale utente
Holystone
Holystone HS210 Manuale utente
Holystone
Holystone HS100 Manuale utente
Holystone
Holystone HS420 Manuale utente
Holystone
Holystone HS720-4K Manuale utente
Holystone
Holystone HS280 Manuale utente
Holystone
Holystone X Series Manuale utente
Holystone
Holystone HS190 Manuale utente
Holystone
Holystone F SERIES Manuale utente
Holystone
Holystone HS720-4K Manuale utente
Holystone
Holystone HS550 Manuale utente
Holystone
Holystone HS600 Manuale utente
Holystone
Holystone HS Series Manuale utente
Holystone
Holystone HS260 Manuale utente
