Home Sentinel VI 400 Manuale utente
VIDEO INTERCOM
SYSTEM
OWNER’S
MANUAL
INSTALLATION AND OPERATION
BEFORE INSTALLING OR
OPERATING THE SYSTEM,
PLEASE READ THIS MANUAL
MODEL: VI 400
2
Section Page
Important Safety Instructions……………........…................. 3
Precaution……………………………………………………. 4
Introduction.....................…………….....................…............ 5
System Contents...................……………................................ 5
Features..................................................…………................... 5
Identifying the Parts
Monitor Unit.......................……..…....…………….....…. 6
Camera Unit…………………………….………….…..… 8
Installation....................................................……………......... 8
Monitor Unit.......…................….........……………............ 10
Camera unit....................….......………...............…........… 11
Expansion Options
Connecting Additional Monitors...…..……………….…... 13
Connecting an Additional Camera…….……….....…….... 14
Operation
Single Camera Operation…………………………….….. 15
Two Camera Operation………………………………….. 16
Trouble Shooting Guide.................….............…………….... 17
Care & Maintenance………………………………………... 17
Specifications............................................……………......…. 18
Warranty.................................................……………......….. 19
Table of Contents
3
•Read Instructions –All the safety and operating instructions should be
read before operating this equipment. These instructions should be
retained for future reference
•Heed Warnings –All warnings on the equipment and in the operating
instructions should be adhered to. All instructions regarding care and
operation of this equipment should be followed.
•Power Sources–Equipment should only be connected to the power
supply specified in the operating instructions or as marked on the
equipment.
•Power-Cord Protection –Keep cable cords and plugs clear of other
objects, particularly at the point where they exit the equipment.
•Cleaning –Clean the equipment by wiping with a soft cloth,
( do not use any abrasive agents or water ).
•Non-use Periods –Power cords should be unplugged from the outlet
when left unused for a long period of time.
•Object and Liquid Entry –Take care not to drop objects or liquids on
any part of the equipment.
•Damage Requiring Service –The unit should be serviced by a
qualified service personnel when:
-The power-supply cord or the plug has been damaged; or
-Objects have fallen, or liquid has been spilled onto the
equipment; or
-The equipment has been exposed to rain; or
-The equipment does not appear to operate normally or exhibits
a marked change in performance; or
-The equipment has been dropped, and/or the enclosure has
been damaged.
•Servicing –Do not attempt to service the appliance beyond that
described in the operating instructions. All other servicing should be
referred to a Qualified Distributor’s Service Personnel.
Important Safety Instructions
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPLIANCE OR POWER ADAPTER TO WATER OR
MOISTURE
4
• Use only the power adapter supplied with the system. The use
of any other power adapter may cause damage to the
system which is not covered under warranty
• Keep it dry. If water should get on it, wipe it off
immediately. Water contains minerals that can corrode
electronic circuits
• Do not use or store in area of high levels of dirt or dust.
The electronic circuit may be contaminated, and any moving parts
will wear prematurely
• Avoid installing the monitor directly into the sun or in any
other intensely bright locations
• Do not install the monitor in areas where it may be exposed
to excessive moisture or extreme temperatures
• Do not install near corrosive chemicals or harmful gases
• Before installing the system completely, it is a good idea to
check for proper operation by temporarily connecting the
monitor to the camera and powering up units.
Precautions
5
Thank you for purchasing the Home Sentinel Video Intercom system. This
model allows you to identify and communicate with callers at the door, from
the security and convenience of any room in your home. Visitors activate the
system by pressing a call button on the outdoor camera, which sounds a
doorbell chime as well as turning on the inside video monitor. A 2 way audio
intercom then lets you speak with visitors after first visually identifying them. It
consists of a monitor station ( MO 401 ) and an outdoor camera unit
( CA 405 ). Expansion is possible to include up to 4 monitors and 2 outdoor
camera stations, which can be installed anywhere for a variety of purposes
and applications. Two outdoor cameras are possible with an optional SB 401
( 2 camera switcher ).
Utilization of an 18 gauge two conductor wire ensures quick and simple
installation.
For proper usage and application, please read the instruction manual
completely.
• Monitor Station
• Outdoor Camera Station
• AC adapter
• Mounting Hardware
• High definition 4" flat screen CRT
• Hand set with 2 way full duplex audio intercom tooutdoor
camera stations and monitors
• High resolution 1/3" B/W CCD image sensor camera
• Wide angle lens with auto iris and auto focus adjustments
• Infrared illumination for clear night vision ( 0 lux)
• The system can be expanded with up to 4 monitor units, and
2 outdoor camera units ( An SB 401 2 camera switcher is required for
a two camera operation )
• Auto-Shut off of monitor after 3 minutes
• 12 volt DC output for optional door release mechanism ( Electronic door
release should be a Normally Closed contact with a rating of 12V DC
360mA ~ 500mA
Introduction
System Contents
Features
6
Identifying the Parts
7
A. MO 401 Monitor
1. Access Door
Conceals all operating controls
2. Brightness Control
Rotate to adjust the picture brightness of the image
3. Contrast Control
Rotate to adjust the picture brightness of the image
4. Volume Control
Rotate to adjust the chime volume level and voice level
5. Talk Button
Use this button to initiate the intercom function
6. Monitor Button
Press to manually activate the camera ( for undetected
Observation )
7. Open Button ( Optional )
Press to remotely unlock/open your door. ( requires an
Electronic door release )
8. High Resolution 4” Flat CRT
To view image delivered from the camera(s)
9. Microphone
Sensitive, hands-free 2 way audio communication
10. 1 x 4 Short terminal
To select the master or slave terminal
11. Wire Terminals
For connection to a camera/ other monitor
12. 1 x 4 Switch
To select one or multiple monitor connections
13. Power Jack
Connect to an AC/DC adapter and power the system
Identifying the Parts
8
CA 405 Camera
1. Microphone
Sensitive, hands-free 2 way audio communication
2. Infrared Illumination
Powerful IR illumination provides clear pictures at night for
close range
3. Wide Angle CCD Camera Lens
Delivers clear wide images to CCD sensor
4. Call Button
Use to initiate the intercom function & illuminate
Identifying the Parts
9
5. Tilt Lever
Flip lever up/down to adjust the viewing angle
6. Wire Terminals
For connection to the monitor
7. Door Release Terminals
For connection to optional electric door release
SB 401 Auto Camera Selector
1. Camera 1 / Camera 2 LED
Identifies which camera has been connected
2. Slower Switch
Press to activate the camera switching mode
3. Wire Terminal
For connection to the monitor
4. Wire Terminal Camera 1 –Connection to camera 1
5. Wire Terminal Camera 2 –Connection to camera 2
Identifying the Parts
10
Installation
Indice
Altri manuali Home Sentinel Sistema di interfono
