Home8Care FDS1300 Manuale utente
Fall & Medical Alert Sensor User Manual
V1.0 2017
1
Fall & Medical Alert Sensor
FDS1300
UserManual
No fall detection system can detect 100% of all falls.
home8care.com
1-844-800-6482 | support@home8care.com
Fall & Medical Alert Sensor User Manual
V1.0 2017
1
Table of Contents
Chapter 1. Introduction.................................................................................2
1.1 System Requirements..............................................................................................2
Chapter 2. Hardware Overview.....................................................................3
Chapter 3. Fall & Medical Alert Sensor Setup.............................................4
3.1 Power on the sensor....................................................................................................4
3.2 Adding the Sensor to the System.................................................................................4
3.3 Testing and positioning the sensor...............................................................................7
3.4 Rename Sensor...........................................................................................................8
3.5 Remove Sensor from System......................................................................................8
Chapter 4. Starting to Use the Fall & Medical Alert Sensor........................9
4.1 Detection Conditions................................................................................................9
4.2 Fall Detection and Notification ...............................................................................10
4.3 Trigger Emergency.................................................................................................10
4.4 LED Indicator Status..............................................................................................11
Appendix –Glossary of Terms...................................................................12
Fall & Medical Alert Sensor User Manual
V1.0 2017
2
Chapter 1. Introduction
Wear the fall detector sensor around your wrist or as a pendant to send an immediate notification to family, friends,
or caregivers when it detects a fall. The sensor automatically triggers a distress signal and alerts upon the detection of a
fall. Press and hold the central button to trigger an emergency alarm.
KEY FEATURES
Works with all Home8 systems
Fall sensor automatically triggers a signal if a fall is detected
Press and hold the central emergency button to trigger an emergency alarm
Built-in attention buzzer
Send App push notifications to multiple users
Rechargeable battery
Low battery alarm
SPECIFICATIONS
Wireless and Security: 433 MHz Preparatory
Wireless Range: 300ft (90m) line of sight
Operating Temperature: 14°F ~ 122°F (-10°C ~ 50°C)
330 mAh rechargeable battery
Water Resistant (IP54)
Power Adapter: Input AC 100-240V, Output DC 5V, 1A
1.1 System Requirements
This section explains the system requirements when using the sensor.
Network
Router with
- 10/100Mbps RJ45 LAN port
- DHCP service
Mobile Device
An Apple iPhone, iPad, Android or Windows mobile device with:
- iOS (version 8.1 above)
- Android (version 4.1 above)
- Windows 10 Mobile, Windows Phone 8.1, Windows Phone 8
* See Appendix –Glossary of Terms.
Fall & Medical Alert Sensor User Manual
V1.0 2017
3
Chapter 2. Hardware Overview
This section provides an overview of the Fall & Medical Alert Sensor.
Fall & Medical Alert Sensor User Manual
V1.0 2017
4
Chapter 3. Fall & Medical Alert Sensor Setup
3.1 Power on the sensor
Before using the sensor, please charge it for at least 2 hours.
Note: The battery should last 7 days under normal use. To be safe, charge daily until the green LED lights-up.
3.2 Adding the Sensor to the System
Before you begin using the sensor, it will need to be added to the system first. For details, see the subsections below.
To activate the sensor, complete the following steps.
Note:
Make sure the Security Shuttle is powered on and connected to your router.
1. Tap the menu icon to show the sidebar menu.
Fall & Medical Alert Sensor User Manual
V1.0 2017
5
2. Tap “Device Management”. If you have more than one Security Shuttle, you may need to swipe left more than once
to find the one you wish the sensor to connect to. After selecting the Security Shuttle, tap the plus icon “+” located to
the right of “Sensor List”.
3. Select “Sensor”.
Fall & Medical Alert Sensor User Manual
V1.0 2017
6
4. Follow the on-screen instructions. When finished, press “Next”.
5. After scanning the QR code located on the back of the sensor, the “sensor adding” process will begin.
Fall & Medical Alert Sensor User Manual
V1.0 2017
7
6. When the activation is completed, the sensor will be added to the device management page. In the illustration shown
below, the name of the Security Shuttle is “Home” and the name of the sensor is “Fall Detector 00170xxxx”.
3.3 Testing and positioning the sensor
After the “sensor adding” process has been completed, you can wear the device as a pendant. We recommend
maintaining the lanyard length at a comfortable position, but as short as possible. To make sure the connection of the
sensor is working, press and hold the emergency button of the sensor for 3 seconds, and you should receive
an“Emergency” push notification.
Fall & Medical Alert Sensor User Manual
V1.0 2017
8
3.4 Rename Sensor
To rename the sensor, go to “Device management”, select
the sensor you want to rename, and then tap “Display
Name”.
3.5 Remove Sensor from System
To remove the sensor from the current Security Shuttle,
tap “Remove Sensor”.
Fall & Medical Alert Sensor User Manual
V1.0 2017
9
Chapter 4. Starting to Use the Fall & Medical Alert Sensor
At this stage, your sensor is now ready for use.
4.1 Detection Conditions
Our fall detection technology follows the basic principles of physics in that the sensor detects the movement of a
human body’s velocity – impact –stability (in whichever direction) to identify a fall.
A signal cover range test is required to determine which areas in your home will be covered and if there are any
environmental conditions that will affect the signal.
The signal cover range may be adversely affected in the following situation:
•Use in an elevator
•A body or other large mass covering the fall detector (e.g., a person falling on top of it)
•Building materials (e.g., concrete, metal, etc.)
•Submersion in liquid (Water Resistant Level is not enough to take a shower or bath)
•Person wearing the sensor r falls down slowly.
•Use in outdoor or out of Wi-Fi signal coverage.
•Intelligent hubs not connected to the power or internet.
•Seniors who are shorter than 4 feet, 6 inches (137 cm) tall
•Seniors who weigh less than 88 pounds (40 kg)
Alert Conditions
Alert NOT
triggered
Stand up
Stand up from squatting
Sit down
Sit down against the sofa from standing/ upper body lean forward
Squat down
Squat down from standing
Lay down
Lay down from sitting
Bend over
The moment of bend over
Bent back
The moment of bent back
Sway
Body shaking
Climb up/walk down stairs
Vibration when stepping
Pendant place on the table
Table vibration
Alert
triggered
Forward falls
Pendant hit/not hit the ground
Backward falls
Pendant hit/not hit the ground
Lateral falls
Pendant hit/not hit the ground
Indice
Manuali Sistema di sicurezza popolari di altre marche
EDM
EDM Solution 6+6 Wireless-AE Manuale utente
Highway Safety Group
Highway Safety Group EA401 Manuale utente
Siren
Siren LED GSM Manuale utente
Detection Systems
Detection Systems 7090i Istruzioni per il montaggio
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manuale utente
Siemens
Siemens FDM273 Manuale utente