Honeywell IF2 Manuale utente
User Guide
IF2
Network Reader
Disclaimer
Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in
this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes
have been made. The information in this publication does not represent a commitment on the part of HII.
HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential
damages resulting from the furnishing, performance, or use of this material. HII disclaims all responsibility for the selec-
tion and use of software and/or hardware to achieve intended results.
This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this doc-
ument may be photocopied, reproduced, or translated into another language without the prior written consent of HII.
Copyright 2011-2018 Honeywell International Inc. All rights reserved.
Web Address: www.honeywellaidc.com
Trademarks
Other product names or marks mentioned in this document may be trademarks or registered trademarks of other compa-
nies and are the property of their respective owners.
The word Intermec, the Intermec logo, and Ready-to-Work are either trademarks or registered trademarks of Intermec by
Honeywell.
This product includes copyrighted software that is licensed under GPL v2 (www.gnu.org/licenses/old-licenses/gpl-
2.0.html) or LGPL v2.1 (www.gnu.org/licenses/lgpl-2.1.html). You may obtain the complete Corresponding Source code
from Honeywell (www.honeywell.com) for a period of three years after Honeywell’s last shipment of this product. This offer
is valid to anyone in receipt of this information
This product includes cryptographic software written by Eric Young (EAY@cryptsoft.com).
Part of the software embedded in this product is gSOAP software. Portions created by gSOAP are Copyright (C) 2001–
2004 Robert A. van Engelen, Genivia inc. All Rights Reserved.
In no event shall the author be liable for any direct, indirect, incidental, special, exemplary, or consequential damages
(including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interrup-
tion) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or oth-
erwise) arising in any way out of the use of this software, even if advised of the possibility of such damage.
ACE(TM), TAO(TM), CIAO(TM), and CoSMIC(TM) (henceforth referred to as “DOC software”) are copyrighted by Douglas C.
Schmidt and his research group at Washington University, University of California, Irvine, and Vanderbilt University, Copy-
right (c) 1993–2006, all rights reserved.
For patent information, refer to www.hsmpats.com.
IF2 Network Reader User Guide i
TABLE OF CONTENTS
Customer Support ....................................................................................................................... vii
Technical Assistance ............................................................................................................vii
Product Service and Repair ............................................................................................... vii
Limited Warranty ................................................................................................................... vii
Chapter 1 - About the RFID Reader ...............................................................1
About the IF2.................................................................................................................................... 1
About the LEDs......................................................................................................................... 2
About the Ready-to-Work Indicator ................................................................................. 3
About the Network and Power Ports ................................................................................ 3
About the Top Panel Ports.................................................................................................... 4
How to Communicate with the IF2.......................................................................................... 5
Assign an Initial IP Address .................................................................................................5
Use the Web Browser Interface.......................................................................................... 7
Save Configuration Changes........................................................................................ 8
Disable Help in the Web Browser Interface ............................................................ 9
How to Install the IF2.................................................................................................................... 9
How to Ground the IF2 .......................................................................................................... 9
How to Provide Adequate Heat Sinking....................................................................... 10
Install the IF2.......................................................................................................................... 10
Connect the IF2 to Your Network ................................................................................... 11
Set the Date and Time ............................................................................................................... 12
How to Use the IF2 Securely ................................................................................................... 12
ii IF2 Network Reader User Guide
Chapter 2 - Configure Network Settings................................................... 13
Configure the Settings for Your Network ...........................................................................13
Configure Ethernet Settings.............................................................................................14
Configure Common Network Settings..........................................................................15
Configure Security ......................................................................................................................16
Control Access Services......................................................................................................17
Set Up Logins..........................................................................................................................18
Configure the IF2 to Use a Password Server .......................................................18
Change the Default Login...........................................................................................20
Disable Access Through the Serial Port .......................................................................21
Manage Certificates ...................................................................................................................21
View Certificates ....................................................................................................................21
Install and Uninstall Certificates ....................................................................................22
Chapter 3 - Develop and Use RFID Applications...................................... 25
About the IF2 Configurations .................................................................................................25
RFID Applications and the IF2................................................................................................26
Use the RFID Resource Kit.................................................................................................26
Create RFID Applications..........................................................................................................26
About RFID Services ...................................................................................................................26
Configure BRI Settings..............................................................................................................27
Change BRI Attribute Settings.........................................................................................27
About BRI Attribute Settings.............................................................................................27
Tag Types............................................................................................................................28
Read Tries...........................................................................................................................28
Write Tries ..........................................................................................................................28
Lock Tries ...........................................................................................................................28
Field Separator ................................................................................................................28
ID Report ............................................................................................................................28
No Tag Report...................................................................................................................29
Report Timeout................................................................................................................29
Timeout Configuration Mode ....................................................................................29
Select Tries ........................................................................................................................29
IF2 Network Reader User Guide iii
Unselect Tries ...................................................................................................................29
Session ................................................................................................................................30
Initial Q................................................................................................................................30
Initialization Tries............................................................................................................30
Schedule Option..............................................................................................................30
ID Tries.................................................................................................................................30
Antenna Tries ....................................................................................................................30
EPCC1G2 Advance Medium Access Mode ...........................................................30
Dense Reader Mode.......................................................................................................31
Antenna Field Strength 1 to 4....................................................................................31
Antenna Sequence: First through Eighth..............................................................31
Configure the BRI Server ....................................................................................................31
View the BRI Server Log ......................................................................................................32
Configure LLRP Settings ..........................................................................................................33
Chapter 4 - Install Applications on the IF2 with Expanded Memory
Option.................................................................................................................35
Create a Configuration File ......................................................................................................35
Auto-Start Applications at Boot Time ..................................................................................36
About .NET Support ....................................................................................................................36
About Java Support.....................................................................................................................36
Execute Java Applications .................................................................................................37
Java Support for Microsoft SQL Server and Sybase.........................................37
Install RFID Applications...........................................................................................................38
Manage Applications ...........................................................................................................38
About the Edgeware Applications .........................................................................................39
Upgrade or Install Edgeware Applications..................................................................39
About the Developer Tools........................................................................................................39
Test the GPIO Interfaces.....................................................................................................40
Send BRI Commands and Running Scripts................................................................40
Load and Run a BRI Script.................................................................................................40
Use the Workbench...............................................................................................................41
iv IF2 Network Reader User Guide
Chapter 5 - Manage, Troubleshoot, and Upgrade the IF2 ..................... 43
Manage the IF2 ............................................................................................................................43
Use the Device Configuration Web Service.......................................................................43
Open a Serial or USB Connection to the IF2.....................................................................44
Open a Serial Connection to the IF2 .............................................................................45
Open a USB Connection to the IF2 ................................................................................45
Maintain the IF2...........................................................................................................................47
View the System Log............................................................................................................47
View the About Screen.........................................................................................................48
Use the LEDs to Locate the IF2.......................................................................................49
Restore the IF2 to the Default Configuration ............................................................49
Restore Default Settings with the Web Browser .......................................................49
Restore Default Settings with the Reset Switch........................................................50
Restore Default Settings with a Serial Connection..................................................50
Reboot the IF2 ........................................................................................................................50
Troubleshoot the IF2 ..................................................................................................................51
Problems While Working with RFID ...............................................................................51
Connect Directly to the RFID Module ...........................................................................51
Problems With Connectivity .............................................................................................53
Call Customer Support..............................................................................................................53
Upgrade Firmware.......................................................................................................................54
Chapter 6 - Use the IF2 GPIO Interfaces ................................................... 55
About the GPIO Interfaces .......................................................................................................55
Access the Interfaces .................................................................................................................55
Use the Input Interfaces ...........................................................................................................56
GPIO Input Signal Descriptions ......................................................................................56
IF2 Powered Input.................................................................................................................56
Isolated Input Interface ......................................................................................................56
Open Collector Input Interface........................................................................................57
Use the Output Interfaces........................................................................................................57
GPIO Output Specifications..............................................................................................57
Switch the High Side with IF2 Power.............................................................................58
IF2 Network Reader User Guide v
Switch the Low Side with IF2 Power...............................................................................58
Switching the High Side With External Power ...........................................................59
Drive a DC Relay to Control an AC Load.......................................................................59
Use the Power Interface ............................................................................................................60
Appendix A - Specifications ..........................................................................61
IF2 Specifications ........................................................................................................................61
RFID Specifications.....................................................................................................................62
Port Pin Assignments .................................................................................................................62
GPIO Port ..................................................................................................................................62
GPIO Port Pin Assignments........................................................................................62
Serial Ports (COM1)..............................................................................................................63
Serial Port Pin Assignments .......................................................................................63
Ethernet Port...........................................................................................................................64
Ethernet Port Pin Assignments.................................................................................64
vi IF2 Network Reader User Guide
IF2 Network Reader User Guide vii
Customer Support
Technical Assistance
To search our knowledge base for a solution or to log in to the Technical Support
portal and report a problem, go to www.hsmcontactsupport.com.
For our latest contact information, see www.honeywellaidc.com/locations.
Product Service and Repair
Honeywell International Inc. provides service for all of its products through service
centers throughout the world. To obtain warranty or non-warranty service, return
your product to Honeywell (postage paid) with a copy of the dated purchase record.
To learn more, go to www.honeywellaidc.com and select Service & Repair at the
bottom of the page.
Limited Warranty
For warranty information, go to www.honeywellaidc.com and click Get Resources >
Product Warranty.
viii IF2 Network Reader User Guide
Altri manuali per IF2
2
Indice
Altri manuali Honeywell Lettore di schede
Honeywell
Honeywell Dolphin 9700-MSCR Manuale utente
Honeywell
Honeywell IH25-0 Manuale utente
Honeywell
Honeywell OmniProx OP-95 Manuale utente
Honeywell
Honeywell 1026FF02F9 Manuale utente
Honeywell
Honeywell OmniClass OM15 Manuale utente
Honeywell
Honeywell luminAXS Series Manuale di istruzioni
Honeywell
Honeywell IF2 Manuale utente
Honeywell
Honeywell Dolphin CN80G Manuale utente
Honeywell
Honeywell IdentIPoint Manuale utente
Honeywell
Honeywell SPR-S8EZS Manuale utente
