Honeywell Belt Mount Sled Manuale utente
Belt Mount Sled
Wearable Solution for Dolphin 70e Black
Quick Start Guide
HWC-BELT-WEH-QS Rev A
12/14
Aller à www.honeywellaidc.com pour le français.
Vai a www.honeywellaidc.com per l'italiano.
Gehe zu www.honeywellaidc.com für Deutsch.
Ir a www.honeywellaidc.com para español.
Para Português, acesse www.honeywellaidc.com.
Перейти на русскоязычный сайт www.honeywellaidc.com.
Pro češtinu jdi na www.honeywellaidc.com.
Pre slovenčinu choďna www.honeywellaidc.com.
Türkçe için lütfen www.honeywellaidc.com sayfasını ziyaret ediniz.
Idźna stronę: www.honeywellaidc.com po quick start w języku polskim.
如要到中国 www.honeywellaidc.com（简体）。
www.honeywellaidc.com
Important Information About this Guide
The Belt Mounted Sled is a device that is used with the wearable version of
the Dolphin 70e Black (Honeywell Wearable Solution). For information about
the Dolphin 70e Black, refer to the quick start packaged with the terminal.
This document is designed to assist the user who is wearing the wearable
Dolphin 70e Black on a belt.
Out of the Box
A typical Honeywell Wearable Solution belt mount accessory kit contains the
following items (may be packaged separately):
• Belt mount sled
• Belt clip assembly
• Headset adapter cable
• Headset
• Bluetooth ring scanner (optional)
• Quick Start Guide
The Dolphin 70e Black terminal and other accessories are packaged
separately. Be sure to keep the original packaging in case you need to return
the Dolphin 70e Black or accessories for service.
Initial Use Overview
When preparing for initial wearable use, insert a fully charged battery and
follow the steps in this guide to assemble the wearable sled and mount the
assembly on a belt. When finished, press the spring clip to remove the
assembly from the belt.
Subsequent Use Overview
For subsequent use, it may be necessary to remove the terminal from the sled
before changing the battery, then reassemble the sled and mount the
assembly on a belt. When finished, press the spring clip to remove the
assembly from the belt.
Getting to Know the Belt Mount Sled
The sled encases theDolphin 70e Black including the touch panel and helps
protect the terminal from impacts.
Dolphin 70e Black Features Not Used
When the Dolphin 70e Black is installed in the belt mounted sled, the following
features are not available:
• Touch screen display
• Micro-USB port
• Internal scanner.
Front Microphone
Scan Button
Sled
Audio Cable
Lock
End Button
Home Button
End Cap
Send Button
Back Button
Power Button
(not used with
Bluetooth Ring Scanner)
Removing the Dolphin Black from the Sled
1. If the audio end cap is used, remove the audio cable.
To prevent damage to the Dolphin 70e Black always
unplug the audio cable before removing the end cap.
2. Slide the lock down to release the
end cap.
3. Push up on the right side of the end cap. Do not
attempt to remove the end cap without opening the
lock first!
4. Pull the end cap off of the sled.
Removing the Battery
1. Remove the Dolphin 70e Black from the sled before changing the bat-
tery.
2. Place the terminal in Suspend mode by pressing and releasing the
Power button .
3. Perform the steps illustrated below to remove the battery.
5. Slide the Dolphin 70e Black out of the sled.
Use the notch in the bottom of the sled to
push the Dolphin 70e Black.
1
2
5
4
3
Installing the Battery
The Dolphin 70e Black model designed for use with the wearable sled uses
battery part numbers BAT-STANDARD-02 (Li-ion 3.7 V, 6.179 watt hour) and
BAT-EXTENDED-02 (Li-ion 3.7 V, 12.358 watt hour) manufactured for
Honeywell International Inc.
We recommend use of Honeywell Li-ion battery packs. Use of any non-
Honeywell battery may result in damage not covered by the warranty.
3
4
6
1
5
Note: Standard model battery
and battery door shown.
2
!
Turning Power On
To turn the terminal On, press and release the Power button .
Suspend Mode
Press and release the Power button to toggle the terminal in or out of
Suspend Mode.
Because the display is hidden in the belt mount sled, observe the backlights
for the Send, Home, Back and End keys. When the Dolphin 70e Black is on,
these keys are backlit. If the keys are not backlit, the terminal is Off or in
Suspend mode.
Note: You should always place the terminal into Suspend mode before removing
the battery.
Pairing the Bluetooth Ring Scanner (Optional)
Prior to this step, the system administrator must have configured EZ Pairing.
Pair the Bluetooth Ring Scanner before placing the terminal in the sled.
1. Touch > Power Tools > EZ Pairing.
2. The EZ Pairing bar code is displayed on
the screen. If using a 2D imager ring
scanner, scan the on-screen bar code or
the bar code label on the back of the
terminal with the Bluetooth Ring Scanner.
If using a 1D ring scanner, scan the bar
code from the label on the back of the terminal.
3. Listen for the confirmation beeps.
4. Confirm the scanner is connected by observing the EZ Pairing icon on
the terminal display. When the icon is green, the scanner is connected .
If the icon is red, the scanner is not connected. Scan the bar code again.
5. If the scan wedge icon is displayed, scan wedge is running. If the scan
wedge icon is not displayed, Touch > Power Tools > ScanWedge
NGW. Tap Yes if a message is displayed about continuing without a
tethered scanner connected.
Placing Dolphin 70e Black into the Sled
1. If the end cap is installed on the
sled, slide the lock down to release
the end cap.
2. Push up on the right side (the side with the lock) of end
cap. Do not attempt to remove the end cap without
sliding the lock first!
EZ Pairing icon
Scan Wedge NGW icon
3. Pull the end cap off the sled.
4. Make sure the USB door is closed. Rotate the door
on the right side of the Dolphin 70e Black to close.
5. Press until the door is flush with the side of the
terminal.
6. Slide the Dolphin 70e Black into the sled.
7. Make sure audio jack door is open. Pull the
rubber door out and rotate the door 180º as
shown to prevent damage.
8. Make sure the audio cable is not installed in the end cap.
9. Slide the end cap straight onto the sled until it clicks in
place.
10. Slide the lock closed to secure the end cap.
Indice
Altri manuali Honeywell Accessori per computer
