Honeywell IFP-300 Specifiche tecniche

Model IFP-300 Basic Operating Instructions

These Instructions must be framed and displayed next to the IFP-300 panel in accordance with NFPA 7 fire code for

Local Protected Fire Alarm Systems. Test the system in accordance to NFPA 7 .

Operation

Task to Per

form

Silence Alarms and

Troubles

Press

SILENCE

then enter a code if prompted. Silence LED will light.

Reset Alarms

Press

RESET

then enter a code if prompted.

View Alarms,

Supervisory, and

Troubles

For each type of condition press the Up or Down button associated for Alarms,

Supervisory, or Troubles.

View status of Point

Press

ENTER

to access Main

Menu.

Press to select Point Functions.

Then press to select Point Status.

Select the module the device is located on by using the Up or Down button. Then

press ENTER.

Enter the point number.

Conduct a Fire Drill

Call service company

May be disabled

May not be allowed by

AHJ in your area.

Press

ENTER

to access Main

Menu.

Then Press 1 to select System Tests.

Press 1 to select Fire Drill.

Press ENTER to start the fire drill.

Press ENTER to end the fire drill.

TROUBLE

FIRE: ALARM SUPERVISORY

CO: ALARM SUPERVISORY

SYSTEM: TROUBLE

Check Detector

Sensitivity

Press

ENTER

to access Main

Menu.

Press for Point Status.

From the list that displays, select the SLC module where the point you want to view is

located.

The fourth line of the display shows the sensitivity status. “NORMAL” means the

detector is in compliance with NFPA 7 .

“CAL MAINT” means the detector is in compliance with NFPA 7 but maintenance should

be performed soon.

“CAL TRBLE” means the detector is not in compliance with NFPA 7 .

Set Time and Date

Press

ENTER

to access Main

Menu.

Press 4 to select Set Time & Date. Enter a code if prompted

Make changes in the fields on the screen as necessary.

When the time and date are correct, press ENTER.

Enable / Disable a Point

Press

ENTER

to access Main

Menu.

Press to select Point Functions.

Press 1 for Disable / Enable Pt

Press 7 for Disable / Enable Pt.

Use the Up or Down button to move through the list. Then press ENTER to select the

module where the point you want to disable/enable is located

Enter the point or circuit number that you want to disable/enable.

Press the right arrow key to toggle between NORMAL (enable) or DISABLE.

View Event History

From the Program Menu.

Press 3 to select Event History.

Press the Up or Downbutton to view events in the history buffer.

For Service Call:

(800) 639- 5 1

Altri manuali Honeywell Pannello di controllo

Honeywell

Honeywell NOTIFIER AM1000 Manuale utente

Honeywell

Honeywell Galaxy 2 Series Manuale utente

Honeywell

Honeywell Notifier ST.PL4+ Manuale utente

Honeywell

Honeywell Gamewell-FCI GWF-7075 Manuale utente

Honeywell

Honeywell NFS-3030 Istruzioni per l'installazione e il funzionamento

Honeywell

Honeywell AQ255 Series Manuale operativo

Honeywell

Honeywell Silent Knight SKE Series Manuale utente

Honeywell

Honeywell DeltaNet FS90 Manuale utente

Honeywell

Honeywell Notifier NFS-320 Manuale utente

Honeywell

Honeywell MINI-ZONE 69-1361 Guida rapida

Honeywell

Honeywell Farenhyt Series Manuale utente

Honeywell

Honeywell Gent Viglion EN54 Manuale di installazione e funzionamento

Honeywell

Honeywell Farenhyt Series Manuale tecnico

Honeywell

Honeywell Domonial cmi Manuale utente

Honeywell

Honeywell Symphony Manuale di istruzioni

Honeywell

Honeywell GALAXY 16103 Manuale utente

Honeywell

Honeywell NOTIFIER NFW-50X Manuale utente

Honeywell

Honeywell Fire-Lite Alarms ES-50X Manuale utente

Honeywell

Honeywell NOTIFIER AM1000 Manuale del proprietario

Honeywell

Honeywell Galaxy Flex Guida utente

Honeywell

Honeywell NOTIFIER INSPIRE E10 Manuale utente

Honeywell

Honeywell NOTIFIER Pearl Guida all'installazione

Honeywell

Honeywell Fire-lite ECC-LOC Manuale utente

Honeywell

Honeywell AQ250 Series Manuale utente

Manuali Pannello di controllo popolari di altre marche

RDZ

RDZ PC-HRX Manuale utente

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Manuale tecnico

Efka

Efka Variocontrol V810 Manuale utente

Cebora

Cebora 208-10 Manuale utente

AMX

AMX AutoPatch CP-15 Manuale utente

Satel

Satel CA-6 KLED-S Manuale utente

Evolution

Evolution IQ plus 800 Manuale utente

Fagor

Fagor 8040 TCO CNC Manuale utente

Trane

Trane ComfortLink II XL950 Control Manuale utente

AKO

AKO PROCool AKO-17635-2 Manuale utente

ABB

ABB 6136/30M-101 Manuale utente

Telikou

Telikou BK-603 Belt Pack Manuale utente

Mapei

Mapei Mapeheat Thermo Touch Manuale utente

Bosch

Bosch D9412GV4 Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Manuale utente

Sminn

Sminn BOX L VF1L EI Manuale utente

Balboa

Balboa TP600 Manuale utente

Nice

Nice HSCU1 Specifiche tecniche