Honeywell RS-232 Manuale utente

INSTALLATION

INSTRUCTIONS RS-232 Interface /

SerialPrinterPort

K1148-X 4/98

1 2 3 4 5 6 7 8

Figure1:Connector

RJ-45

FemaleDB-9 Back view

21345 6789

Pin DCE DTE

1 DCD DCD

2 RXD TXD

3 TXD RXD

4 DSR DTR

5 GND GND

6 DTR DSR

7 RTS CTS

8 CTS RTS

Figure 3: Signal Lines: Interface RJ-45 connector

Bl R G O Bk Y Gy/Wh Br

Figure 2: Signal Lines (Female DB-9 Front view)

Pin DCE DTE

1 DCD DCD

2 RXD TXD

3 TXD RXD

4 DSR DTR

5 GND GND

6 DTR DSR

7 RTS CTS

8 CTS RTS

Wire colors from RJ-45

Install crimp pins in matching

DB-9 locations as shown on

the left.

21345

6789 NOTE: Location 9 on DB-9 is empty.

The hardware in this package provides an RS-232 interface to a Destiny control panel (model Des-

tiny 6100, software version 8.04 or later). The interface can be used to provide 2-way communica-

tion with a personal computer, Remote System Mode with an RS-232 equipped controller, or to send

a real-time log of system events to a serial printer.

NOTE: Observe the drawing

and the connector used and

verify the color codes are

equivalent.

Serial Printers:

If your serial printer requires a

male 9 or 25 pin connector, you

can get a gender changer at an

electronics store. Destiny 6100

panel software supports only

GND, TXD, and RXD control

lines. Some printers require

additional control lines. You

may need to jumper these control

lines in order to use such print-

ers. Consult your printer manual

for further information.

Signal Lines:

Figure 2 shows the configuration

of signal lines in the RJ-45/DB-9

converter when wired as shown

in Figure 1. Pin 1 for the RJ-45

connector (J4) is closest to the

top of the board. Figure 3 shows

the signal lines used in a custom

installation with a DB-9 connec-

tor at J1 on the RS-232 board.

The signal lines listed on the RS-

232 Board pertain to this custom

installation, not to the standard

RJ-45.

Downloaded from - http://www.guardianalarms.net

Cable:

TheRS-232 interfaceis attachedto aRJ-45 to

DB-9 connector with either a 4 conductor or 8

conductor “phone” cable. The cable is NOT pin

compatiblewithstandard4conductorphonecords.

See Figure 2: Connection Cable. For a

4 conductor cable only pins 3,4,5,6 on the RJ-45

connector will be used. As of software revision

8.04 only pins 3,4,5,6 are supported eliminating

the necessity for 8 conductor connections.

DTE vs. DCE:

TheRS-232interfacecanoperateineitherDateTerminalEquipment(DTE)orDataCommunicationEquipment

(DCE)mode. A jumper (J3)is located tothe right ofthe RJ-45 ontheinterface board. Attachthesupplied

jumperacrossthe centerandbottompin forDCEoperationor thetoptwopins forDTE. Mostapplications

will require DCE including connection to a PC and a printer.

Protocol:

The2-wayRS-232standardfortheDestinycontrol

panelisanopenstandardandisavailablebycalling

TechnicalSupport at 800-272-7937.

Printer Reports:

When enabled (as described in Programming, above), any event programmed to appear in the Event

Memory Log will be printed when an event occurs. All items in the system that can be sent to a central

station will be printed as the event occurs. The “Report to Central Station” programming option does

not affect the printer report.

Note: the RS-232 does not buffer events, if a printer is off-line the event will not be printed.

4 Conductor Cable: Top View

8 Conductor Cable: Top View

Figure 2: Connection Cable

Br Bl Y G R Bk O Gy Br Bl Y G R Bk O Gy

YGRBkYGRBk

Programming:

The following programming options are provided:

001 - Enable the RS-232 adapter

002 - Enable printer compatibility

004 - Use English Line text (for printers only)

008 - Enable 2-Way RS-232 communication (for PC connections)

064 - Enable Remote System Mode

Place the system into program mode (default: 9,1,7,3), enter location 0,1,5,5 and then enter the sum of

options to be enabled. For example, to enable 2-way communication, enter 0,0,9 (001 + 008). For

printing, enter 0,0,7 (001 + 002 + 004).

Format:

The following is an example of the printer output when connected to the RS-232 port.

Event User Time Month Day

Open - System Disarmed User = 01 13:23 July 29

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Honeywell Pannello di controllo

Honeywell

Honeywell GX-Series Istruzioni per il montaggio

Honeywell

Honeywell HVC0001 Manuale utente

Honeywell

Honeywell W8835A Manuale utente

Honeywell

Honeywell NOTIFIER NFW-100X Manuale utente

Honeywell

Honeywell Excel 5000 System Series Manuale utente

Honeywell

Honeywell Galaxy Flex Guida utente

Honeywell

Honeywell MiniZone EMM-3U Manuale operativo

Honeywell

Honeywell NOTIFIER NCA-2 Manuale utente

Honeywell

Honeywell Lynx Touch L5100 Guida all'installazione

Honeywell

Honeywell NOTIFIER AM1000 Manuale utente

Honeywell

Honeywell Galaxy 3-48C Manuale utente

Honeywell

Honeywell VARIODYN D1 Comprio Manuale tecnico

Honeywell

Honeywell NOTIFIER SFP-5UD Series Manuale utente

Honeywell

Honeywell Galaxy 16 Manuale utente

Honeywell

Honeywell MB-Secure 1000 Manuale utente

Honeywell

Honeywell Tuxedo Touch Wi-Fi Istruzioni per il montaggio

Honeywell

Honeywell Silent Knight SKE Series Manuale utente

Honeywell

Honeywell HPZC10 Series Manuale utente

Honeywell

Honeywell MINI-ZONE 69-1361 Guida rapida

Honeywell

Honeywell Galaxy Dimension series Guida utente

Honeywell

Honeywell FCI Gamewell Flex 404 Manuale utente

Honeywell

Honeywell Fire-Lite Alarms MS-9600 Manuale utente

Honeywell

Honeywell Notifier NFS-320 Manuale utente

Honeywell

Honeywell Gent Viglion EN54 Manuale di installazione e funzionamento

Manuali Pannello di controllo popolari di altre marche

RDZ

RDZ PC-HRX Manuale utente

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Manuale tecnico

Efka

Efka Variocontrol V810 Manuale utente

Cebora

Cebora 208-10 Manuale utente

AMX

AMX AutoPatch CP-15 Manuale utente

Satel

Satel CA-6 KLED-S Manuale utente

Evolution

Evolution IQ plus 800 Manuale utente

Fagor

Fagor 8040 TCO CNC Manuale utente

Trane

Trane ComfortLink II XL950 Control Manuale utente

AKO

AKO PROCool AKO-17635-2 Manuale utente

ABB

ABB 6136/30M-101 Manuale utente

Telikou

Telikou BK-603 Belt Pack Manuale utente

Mapei

Mapei Mapeheat Thermo Touch Manuale utente

Bosch

Bosch D9412GV4 Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Manuale utente

Sminn

Sminn BOX L VF1L EI Manuale utente

Balboa

Balboa TP600 Manuale utente

Nice

Nice HSCU1 Specifiche tecniche