Honeywell HC900 Manuale utente

12/2018 Power Supply Rack Extension Kit # 51-52-33-149 1

HC900 Controller

Power Supply Rack Extension Installation

PS Rack Extension 900RPE - (current revision number)

Document Number Form: 51-52-33-149

Effective Date: 12/2018

Supersedes: 04/2005

Summary

• Optional field installation kit

• Installed on the rack next to the Primary

Power Supply

• Provides a rack extension to hold a 2nd

(Reserve) Power Supply and Power

Status Module per I/O Rack in order to

maintain power to the rack if the Primary

Power Supply fails

• Allows either Power Supply to be

replaced while maintaining power to the

rack using the other Power Supply

• Available for the 8-Slot and 12-Slot I/O

Racks

• Not available for the 4 Slot I/O Rack

8-Slot Rack

12-Slot Rack

8-Slot Rack

12-Slot Rack

Figure 1 PS Rack Extension Location

Procedure Follow the procedure in Table 1 to install a Power Supply (PS) Rack Extension to

an 8-slot or 12-slot I/O rack.

Table 1 – PS Rack Extension Installation

Step Action

1 Remove power to the rack to be extended.

2 Remove the rack from its mounting

and remove all modules from the

rack. Place the empty rack on a

flat surface with the back plate

down.

Controller CPU or Scanner Module Slot

Power Supply Slot

I/O Modules

Controller CPU or Scanner Module Slot

Power Supply Slot

I/O Modules

2 Power Supply Rack Extension Kit # 51-52-33-149 12/2018

Step Action

3 900R12-0200 (Standard Rack) can

be converted to 900R12R-0200

(Redundant power Supply). Locate

resistors R3,R4, R5 and R6 on the

I/O rack backplane. Cut and remove

the resistors, replace end cap.

4 Remove the screws from the

outside of the I/O rack side plate.

Retain the side plate.

JP21

I/O Rack

Side Plate JP21JP21

I/O Rack

Side Plate

5 Attach the PS extension rack to

the I/O rack with 4 of the screws

(SEMS M3 X 5.0 mm long)

provided in the kit.

Make sure that J3 on the PS

extension rack backplane

meshes with JP21 on the I/O

rack backplane.

J3 JP21

J3J3 JP21

6 Attach the side plate previously

removed from the I/O rack to the

PS extension rack using the 6

screws (Flat Head M3 x 6.0 mm

long) provided in the kit.

Note that the countersunk holes in

the plate should face outward.

J3 JP21

I/O Rack

Side Plate

previously removed

J3 JP21

J3J3 JP21

I/O Rack

Side Plate

previously removed

7 You will need to drill two mounting

holes (same size mounting holes

as the main rack) for the 900RPE

rack.

Place the updated rack in

position and mark the 2

mounting hole locations (top

and bottom of rack of the 900

RPE extension).

Remove the rack and drill the

mounting holes.

900RPE Rear

Mounting Plate

900RPE Rear

Mounting Plate

8 Re-install the Power Supply, CPU or Scanner and I/O modules.

9 If available, install the new Power Supply Module and Power Status Module into the 900RPE

rack.

10 Mount the updated rack assembly and connect a separate power source with disconnect to the

new power supply.

Altri manuali per HC900

Altri manuali Honeywell Controllori

Honeywell

Honeywell Touchpoint Plus Nota di rilascio

Honeywell

Honeywell FAST-ACTING, TWO-POSITION ACTUATORS ML4202 Manuale utente

Honeywell

Honeywell VC6613ME6000 Manuale utente

Honeywell

Honeywell VS820A Manuale utente

Honeywell

Honeywell T775U2006 Manuale utente

Honeywell

Honeywell V800 Manuale utente

Honeywell

Honeywell GENT Mimic LED Driver Card Manuale di istruzioni

Honeywell

Honeywell CD3200 Manuale utente

Honeywell

Honeywell N20 Series Manuale utente

Honeywell

Honeywell VK41 V Series Manuale utente

Honeywell

Honeywell ADEMCO Optiflex Manuale utente

Honeywell

Honeywell UDC2500 Manuale utente

Honeywell

Honeywell Evohome Istruzioni per l’uso

Honeywell

Honeywell UDC3300 Manuale utente

Honeywell

Honeywell Touchpoint Plus Guida utente

Honeywell

Honeywell SMARTBOX Manuale utente

Honeywell

Honeywell P906C Manuale operativo

Honeywell

Honeywell CENTRA LINE EAGLEHAWK Manuale di installazione e funzionamento

Honeywell

Honeywell ROBINEX M 100 Manuale utente

Honeywell

Honeywell MP909E Scheda tecnica

Honeywell

Honeywell AQ251 Guida all'installazione

Honeywell

Honeywell Spyder 5 Manuale utente

Honeywell

Honeywell B Manuale utente

Honeywell

Honeywell AutoRAE 2 Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente