Honeywell Thor VM1A Manuale utente
\
Thor™ VM1A
Vehicle-Mount Computer
Powered by Android™
Quick Start Guide
VM1A-A8-EN-QS Rev A
10/18
Out of the Box
Make sure your shipping box contains these items:
• Thor VM1A vehicle-mounted computer (Model VM1A-L0N)
• Regulatory Sheet
If you ordered additional accessories for your computer, verify
that they are also included with the order. Be sure to keep the
original packaging in case you need to return the computer for
service.
Computer Features
Power
Button
Orange
Key LED
System
LEDs
Microphone
Speakers
Blue Key
LED
Blue Key
Ambient
Light
Sensor
Connection
LEDs
Touch
Panel
Orange
Key
Shift/Caps
Lock LED
Ctrl LED
Alt LED
Stylus
Wi-Fi
(MAIN)
SD Card
Access
Panel Dock
Contact
Pads
Provision for
Laptop Security
Cable
Provision for
Padlock
Quick Release
Handle
UPS
Disconnect
Button
Access
Panel
Wi-Fi
(AUX)
Dock Features
Dock Contact
Pads
Strain Relief Clamps
Power
Connector
COM 2
COM 1
RAM Ball
Fuse
Power
Switch
Audio
USB
Standard Dock
Accessory
Mount
Power
Switch
COM 2
Ethernet
USB 2
USB 1
Accessory
Mount
COM 1
Audio
Fuse
Power
Connector Dock USB Client Port
Enhanced Dock
Strain Relief Clamps
RAM Ball RAM Clamp RAM Plate
Mount to Vehicle
The Thor VM1A should be secured to an area in the vehicle
where it:
• Does not obstruct the driver's vision or safe vehicle operation.
• Will be protected from rain or inclement weather.
• Will be protected from extremely high concentrations of dust
or wind-blown debris.
• Can be easily accessed by a user seated in the driver's seat
while the vehicle is not in operation.
To mount the VM1A using a RAM mount system:
1. Attach RAM base to vehicle (RAM ball, RAM Clamp, RAM
Plate, etc.).
2. Attach RAM ball to the Smart Dock.
3. Attach VM1A assembly to RAM base using RAM arm and
tighten knob on RAM arm.
For more mounting details, refer to the user guide available at
www.honeywellaidc.com.
Connecting the Power Cable for 12-48 VDC Vehicles
(10-60 VDC Direct Connection)
Note: Refer to the Thor VM1A User Guide for other power
connections, available at www.honeywellaidc.com.
Caution: For installation by trained service
personnel only.
Warning: Fuse Requirements
For proper and safe installation, the input power cable
must be connected to a fused circuit on the vehicle. If
the supply connection is made directly to the battery,
the fuse should be installed in the positive lead within 5
inches of the battery’s positive (+) terminal. The fused
circuit requires a maximum time delay (slow blow) fuse
with a current rating as noted below.
• For 12VDC input, use a 10A slow blow fuse that has a
DC voltage rating greater than 12VDC.
• For 24VDC input, use a 6A slow blow fuse that has a
DC voltage rating greater than 24VDC.
• For 36VDC input, use a 4A slow blow fuse that has a
DC voltage rating greater than 36VDC.
• For 48VDC input, use a 3A slow blow fuse that has a
DC voltage rating greater than 48VDC.
Note: For North America, a UL Listed fuse must be used.
Power Cable Routing
Power Cable Wiring Diagram with Right Angle and 6 Wires
Twist the red and red/white wires together and twist the black
and black/white wires together before connecting to vehicle
power.
Connect the green wire to vehicle ground:
Caution: For battery powered vehicles, the green
wire must be connected to the vehicle
chassis ground.
Caution: For internal combustion engine powered
vehicles, the green wire is connected to the
vehicle chassis ground, which can also be
battery negative.
Wire Color Connection
Red DC + (10-60 VDC)
Red/White DC + (10-60 VDC)
Black DC -
Black/White DC -
Green Ground
Blue Ignition Sense Input (optional)
Refer to the Thor VM1A User Guide,
available at www.honeywellaidc.com, for
further information about ignition
control.
Altri manuali per Thor VM1A
1
Indice
Altri manuali Honeywell Scrivania
Honeywell
Honeywell Viewer-Pro-Kit Manuale utente
Honeywell
Honeywell Esser 8010 Manuale utente
Honeywell
Honeywell THOR VM1 Manuale utente
Honeywell
Honeywell Thor CV31 Manuale utente
Honeywell
Honeywell DPS8/70 Manuale utente
Honeywell
Honeywell Z4 G4 Manuale tecnico
Honeywell
Honeywell DPS8 46 LO PROFILE Manuale utente
Honeywell
Honeywell DPS 8 Guida utente
Honeywell
Honeywell H316 Manuale utente
Honeywell
Honeywell 200 Series Manuale utente
Honeywell
Honeywell R5500 Manuale tecnico
Honeywell
Honeywell VX6 Manuale utente
Honeywell
Honeywell VX6 Manuale utente
Honeywell
Honeywell DPS 6 PLUS Manuale di istruzioni
Honeywell
Honeywell VX6 Manuale utente
Honeywell
Honeywell Fusion4 MSC-L Manuale utente
Honeywell
Honeywell 400 Series Manuale utente
Honeywell
Honeywell CT45 Series Manuale utente
Honeywell
Honeywell T5810XL Manuale tecnico
Honeywell
Honeywell Thor VX8 Manuale utente
