Honeywell Dolphin 75e Manuale utente
Out of the Box
Make sure that your shipping box contains these items:
• Dolphin 75e handheld computer (terminal)
• 1GB, 2GB, or 4GB industrial grade microSD™ card (optional)
• Rechargeable 3.7V Li-ion battery
• USB charge/communication cable
• Power adapter with regional plug adapters
• Product documentation
If you ordered accessories for your terminal, verify that they are also included
with the order. Be sure to keep the original packaging in case you need to
return the Dolphin terminal for service.
Memory Card Specifications
Honeywell recommends the use of Single Level Cell (SLC) industrial grade
microSD or microSDHC™ memory cards with Dolphin terminals for maxi-
mum performance and durability. Contact a Honeywell sales representative
for additional information on qualified memory card options.
Dolphin 75e Features
Microphone
Scan Button
Battery Status / Notification LED
Right Scan
Button
USB Door /
Micro USB
Port
Start Button
Administrator
or Developer
Definable Button
Back Button
Search,
Cortana® or
Bing®Access
Scan Status LED
Front Speaker
Touch Panel
Bottom Speaker
Camera Flash / Flashlight
Camera Lens
I/O Connector
Battery Door
(standard model shown)
Volume Buttons
Left Scan Button
Power Button
Audio Jack
Image Engine Window (LED aperture)
Battery
Door Lock
Memory Card Socket
Memory Card Retention Flap
Battery Latch
(battery and battery door not shown)
Install the Battery
Dolphin 75e models are designed for use with battery part numbers
BAT-STANDARD-02 (Li-ion 3.7 V, 6.179 watt hour) and BAT-EXTENDED-02
(Li-ion 3.7 V, 12.358 watt hour), manufactured for Honeywell International
Inc.
The Dolphin 75e is shipped with the battery packaged separately from the
terminal. Perform the steps illustrated below to install the battery.
Ensure all components are dry prior to placing the battery in the
terminal. Mating wet components may cause damage not covered by
the warranty.
We recommend use of Honeywell Li-ion battery packs. Use of any non-
Honeywell battery may result in damage not covered by the warranty.
3
4
6
1
5
Note: Standard model battery and
battery door shown.
2
Apply pressure to the
edges of the battery door
before engaging the lock
to ensure the door is
properly closed.
Charge the Dolphin 75e
Dolphin terminals ship with the battery significantly discharged of power.
Charge the battery with a Dolphin charging device for a minimum of 4 hours
for the standard battery and 6 hours for the extended battery.
When using the USB cable supplied to charge the terminal via a 500mA USB
port on a host device, charge the battery for a minimum of 6 hours for the
standard battery and 8 hours for the extended battery.
Factors that Affect Charge Times
• Using the terminal while charging the battery increases the time required
to reach a full charge.
• If the terminal is drawing more current than supplied by the charging
source, charging will not take place. For additional information, see the
user's guide.
We recommend use of Honeywell peripherals, power cables, and power
adapters. Use of any non-Honeywell peripherals, cables, or power
adapters may cause damage not covered by the warranty.
Dolphin 75e model terminals are designed for use with the following charging
devices and cables: 70e-HB, 70e-EHB, 70e-CB, 70e-NB, 70e-MB, 70e-MC,
and the 70e-USB ADAPTERKIT.
Ensure all components are dry prior to mating terminals/batteries with
peripheral devices. Mating wet components may cause damage not
covered by the warranty.
HomeBase (Model 70e-HB)
The 70e-HB charger is designed for use with Dolphin 75e model terminals,
and battery part numbers BAT-STANDARD-02 (Li-ion 3.7V, 6.179 watt hour)
and BAT-EXTENDED-02 (Li-ion 3.7V, 12.358 watt hour) manufactured for
Honeywell International Inc.
Use only a UL Listed power supply that has been qualified by Honeywell with
output rated at 12VDC and 3 amps with the device.
HomeBase Parts
HomeBase LED Indicators
AUX battery LED
Orange The auxiliary battery is charging.
Green The auxiliary battery has completed charging and is ready
for use.
Dock LED
Blue The terminal is properly seated in the base.
COMM LED
Green A USB connection is established with the host workstation.
2
AUX Battery Well
AUX
Battery LED
COMM LED
Dock LED
AC Power Cord
USB Port
DC Power
Jack
Power Adapter
Power Cable
USB Charge/Communication Cable (70e-USB ADAPTERKIT)
The USB Charge/Communication cable provides two options for charging
the terminal. Use the cable in conjunction with the provided power supply
adapter and plug adapter to charge the terminal from a power outlet or
connect the cable to a high-power USB port to charge from a host device.
Option 1: Charging from a power outlet
Use only a UL Listed power supply, which has been qualified by Honeywell
with an output rated at 5VDC and 1A with the device.
Option 2: Charging from a high-power USB port on a host device
For important information about charging, see “Factors that Affect Charge
Times”.
Power
Adapter
Micro
USB Port
USB Door
Plug Adapter
70e-USB Charge/
Communication Cable
Micro USB
Port
USB
Door
Host Device
USB Port
70e-USB Charge/
Communication Cable
First Time Consumer Setup
1. Press the Power button .
2. Select a language, and then touch Next.
3. Select your region, and then touch Next.
4. Touch Cancel to bypass the advanced provisioning options and
access the consumer setup.
5. Follow the on screen prompts for setting up the terminal, your WiFi
connections, and creating a Microsoft®account (optional). To learn
more about what you can do with a Microsoft account, go to
https://account.microsoft.com/about.
About the Start Screen
On Start, swipe left to access the Apps list or scroll to the bottom of the
screen and touch All apps. To learn how to customize the Start screen, see
the user’s guide.
Notification /
Status Bar
Start
Turn Power On/Off
To turn the terminal On, press and release the Power button .
To turn the terminal Off:
1. Press and hold the Power button .
2. When the message, “slide down to power off” appears, release the
button and swipe down toward the bottom of the screen.
Note: You should always power off the terminal before removing the battery.
Lock Screen and Sleep Mode (Suspend Mode)
To save battery power, the touch panel display dims, and then turns off after
a period of inactivity. If the display stays off longer than the set time limit,
the terminal enters sleep mode.
1. Press and release the Power button to wake the terminal.
2. Swipe up from the bottom of the screen to unlock the terminal.
To adjust the time out limits:
1. T
ouch
Settings
on the Apps list screen
.
2. Select Personalization > lock screen to adjust the display time out limit
or select Extras > sensor settings to adjust the sleep time out limit.
Turn Airplane Mode On/Off
1. Swipe down from the top of the touch screen to open the quick settings.
2. Select Expand.
3. Touch Airplane mode to toggle the mode On or Off.
Note: When Airplane mode is turned On, shows on the status bar.
Altri manuali per Dolphin 75e
10
Indice
Altri manuali Honeywell Palmare
Honeywell
Honeywell CT50 Manuale utente
Honeywell
Honeywell DOLPHIN 6500 Manuale di riferimento
Honeywell
Honeywell Dolphin CN85 Manuale utente
Honeywell
Honeywell Marathon Manuale utente
Honeywell
Honeywell MX7 Tecton Manuale utente
Honeywell
Honeywell CT50 Manuale utente
Honeywell
Honeywell Dolphin 99EXLG Series Manuale utente
Honeywell
Honeywell CT50 Manuale utente
Honeywell
Honeywell 7900L0P-422C20E - Hand Held Products Dolphin... Manuale utente
Honeywell
Honeywell CN70 Series Manuale utente
Honeywell
Honeywell Dolphin 9900 Manuale utente
Honeywell
Honeywell DOLPHIN 6100 Manuale utente
Honeywell
Honeywell EDA50K-0 Manuale utente
Honeywell
Honeywell Dolphin 6000 Manuale utente
Honeywell
Honeywell Dolphin CT40XP Manuale utente
Honeywell
Honeywell CK75LAN Manuale utente
Honeywell
Honeywell Dolphin 60s Manuale del proprietario
Honeywell
Honeywell Dolphin 6000 Manuale utente
Honeywell
Honeywell MX3PLUS Manuale utente
Honeywell
Honeywell HX3 Manuale utente
