Honeywell Dolphin 75e Manuale utente
Dolphin™ 75e
with Windows® Embedded 8.1 Handheld
Quick Start Guide
75E-H81-ENUS-QS Rev C
6/15
Out of the Box
Verify that your carton contains the following items:
• Dolphin 75e handheld computer (terminal)
• 1GB, 2GB, or 4GB industrial grade microSD™ card (optional)
• Rechargeable 3.7V Li-ion battery
• USB charge/communication cable
• Power adapter with regional plug adapters
• Product documentation
If you ordered accessories for your terminal, verify that they are also included
with the order. Be sure to keep the original packaging in case you need to
return the Dolphin terminal for service.
Memory Card Specifications
Honeywell recommends the use of Single Level Cell (SLC) industrial grade
microSD or microSDHC™ memory cards with Dolphin terminals for maxi-
mum performance and durability. Contact a Honeywell sales representative
for additional information on qualified memory card options.
Getting to Know the Dolphin 75e
Front
Microphone
Scan Button
Battery Charging Status and
General Notification LED
Right Scan/
Image Button
USB Door/
Micro USB
Port
Start Button
Administrator
or Developer
Definable Button
Back Button
Search,
Cortana® or
Bing®Access
Scan Status
Notification LED
Front Speaker
Touch Panel
Display
Bottom Speaker
Camera Flash/Flashlight
Color Camera
Lens
I/O Connector
Battery Door
(standard model shown)
Volume Control Button
Left Scan/Image Button
Power Button
Audio Jack
Image Engine Window (LED aperture)
Battery
Door Lock
Memory Card Socket
Memory Card Retention Flap
Battery Latch
(battery and battery door not shown)
NFC SIM Card Socket
NFC SIM Card Retention Flap
Installing the Battery
Dolphin 75e models are designed for use with battery part numbers
BAT-STANDARD-02 (Li-ion 3.7 V, 6.179 watt hour) and BAT-EXTENDED-02
(Li-ion 3.7 V, 12.358 watt hour), manufactured for Honeywell International
Inc.
The Dolphin 75e is shipped with the battery packaged separately from the
terminal. Perform the steps illustrated below to install the battery.
Ensure all components are dry prior to placing the battery in the
terminal. Mating wet components may cause damage not covered by
the warranty.
We recommend use of Honeywell Li-ion battery packs. Use of any non-
Honeywell battery may result in damage not covered by the warranty.
3
4
6
1
5
Note: Standard model battery and
battery door shown.
2
Apply pressure to the
edges of the battery door
before engaging the lock
to ensure the door is
properly closed.
Charging the Dolphin 75e
Dolphin terminals ship with the battery significantly discharged of power.
Charge the battery with a Dolphin charging device for a minimum of 4 hours
for the standard battery and 6 hours for the extended battery. When using
the 70e-USB Charge/Communication cable to charge from a 500mA USB
port on a host device, charge the battery for a minimum of 6 hours for the
standard battery and 8 hours for the extended battery.
Note: Using the terminal while charging the battery significantly increases the
time required to reach a full charge.
We recommend use of Honeywell peripherals, power cables, and power
adapters. Use of any non-Honeywell peripherals, cables, or power
adapters may cause damage not covered by the warranty.
Dolphin 75e model terminals are designed for use with the following charging
devices and cables: 70e-HB, 70e-EHB, 70e-CB, 70e-NB, 70e-MB, 70e-MC,
and the 70e-USB ADAPTERKIT.
Ensure all components are dry prior to mating terminals/batteries with
peripheral devices. Mating wet components may cause damage not
covered by the warranty.
HomeBase (Model 70e-HB)
The 70e-HB charger is designed for use with Dolphin 75e model terminals,
and battery part numbers BAT-STANDARD-02 (Li-ion 3.7V, 6.179 watt hour)
and BAT-EXTENDED-02 (Li-ion 3.7V, 12.358 watt hour) manufactured for
Honeywell International Inc.
Use only a UL Listed power supply, which has been qualified by Honeywell
with output rated at 12VDC and 3 amps with the device.
HomeBase Parts
HomeBase LED Indicators
AUX battery LED
Orange The auxiliary battery is charging.
Green The auxiliary battery has completed charging and is ready
for use.
Dock LED
Blue The terminal is properly seated in the base.
COMM LED
Green A USB connection is established with the host workstation.
2
AUX Battery Well
AUX
Battery LED
COMM LED
Dock LED
AC Power Cord
USB Port
DC Power
Jack
Power Adapter
Power Cable
USB Charge/Communication Cable (70e-USB ADAPTERKIT)
The USB Charge/Communication cable provides two options for charging
the terminal. Use the cable in conjunction with the provided power supply
adapter and plug adapter to charge the terminal from a power outlet or con-
nect the cable to a high-power USB port to charge from a host device.
Option 1: Charging from a power outlet
Use only a UL Listed power supply, which has been qualified by Honeywell
with an output rated at 5VDC and 1A with the device.
Option 2: Charging from a high-power USB port on a host device
Note: Charging the battery through a USB port takes more time than direct
AC adapter charging. USB charging will not take place if the terminal is
drawing more current than supplied by the USB port. Refer to the user's
guide for additional information.
Touch Settings > USB. Check the box next to “Notify me when I
connect to a slower charger”.
Power
Adapter
Micro
USB Port
USB Door
Plug Adapter
70e-USB Charge/
Communication Cable
Micro USB
Port
USB
Door
Host Device
USB Port
70e-USB Charge/
Communication Cable
First Time Power Up Instructions
To learn how to use a custom provisional XML file during initial power up to
configure the terminal, see the user’s guide available for download from
www.honyewllaidc.com. To learn more about creating custom provisioning
XML files, see the Administrator Guide for Windows Embedded 8.1
Handheld, available from Microsoft at https://technet.microsoft.com.
To get started quickly without using a custom provisioning XML file, use one
of the options below.
Option 1: Scan the quick start bar code.
1. Press the Power button .
2. Select a language, and then next from the Welcome screen.
3. Point the terminal at the bar code below. Press the Scan button.
On a successful scan, the terminal beeps twice and “configuration
received” appears under the Barcode option on the screen.
Note: For optimum performance, avoid reflections by scanning the bar
code at a slight angle.
4. Touch next. “Configuration in progress” appears on the screen. When
the terminal is done booting, the Start screen appears.
Option 2: Use the Consumer setup option.
1. Press the Power button .
2. Select a language, and then next from the Welcome screen.
3. On the Set up your Handheld screen, touch and hold the right edge of the
screen until the scroll bar appears (thin gray vertical line). Swipe up until
you see More Options.
4. Touch More Options.
5. Select Consumer setup. The terminal reboots and then displays the
Welcome back screen.
6. Select next.
7. On the Connect to Wi-Fi screen, select a Wi-Fi network from the
available network list. Enter the appropriate security credentials, and
then select done.
8. Select either recommended or custom from the Set up your Handheld
screen.
9. Follow the on screen prompts for setting up the terminal and creating a
Microsoft® account (optional).
To learn more about what you can do with a Microsoft account, go to
www.windowsphone.com.
Aiming Beam
The aiming beam is narrower when you hold the terminal closer to a bar
code and the aiming beam is wider when you hold it farther from the bar
code.
The aiming beam must be aimed closer to symbologies that have smaller
bars or elements (mil size). The aiming beam must be aimed farther from
symbologies that have larger bars or elements (mil size).
Linear Bar Code
2D Matrix Symbol
Altri manuali per Dolphin 75e
10
Indice
Altri manuali Honeywell Palmare
Honeywell
Honeywell MX9 Manuale utente
Honeywell
Honeywell Dolphin 6110 Manuale utente
Honeywell
Honeywell Dolphin CT40 Manuale utente
Honeywell
Honeywell CT50 Manuale utente
Honeywell
Honeywell 8680i Series Manuale utente
Honeywell
Honeywell 7600BP-112-B6EE - Hand Held Products Dolphin... Manuale utente
Honeywell
Honeywell MX8 Manuale utente
Honeywell
Honeywell CN75 Manuale utente
Honeywell
Honeywell ScanPal EDA50K Manuale utente
Honeywell
Honeywell HX2 Manuale utente
Honeywell
Honeywell Dolphin 9900 Manuale utente
Honeywell
Honeywell Dolphin 70e Black Manuale utente
Honeywell
Honeywell Dolphin 7850 Manuale utente
Honeywell
Honeywell 7600BP-112-B6EE - Hand Held Products Dolphin... Manuale utente
Honeywell
Honeywell CT50 Manuale utente
Honeywell
Honeywell Marathon Manuale utente
Honeywell
Honeywell MX8 Manuale utente
Honeywell
Honeywell CT50 Manuale utente
Honeywell
Honeywell Dolphin 75e Manuale utente
Honeywell
Honeywell Dolphin 6000 Manuale utente
