Honeywell HCM-3060 Series Manuale utente

OWNER’S MANUAL

6 US GALLONS (22.7 LITERS) OUTPUT PER DAY

COOL MOISTURE HUMIDIFIER

Model HCM-3060 Series

* Output dependent on room temperature and humidity.

*

HIGH NORMAL

OFF

POWER

LOW

HUMIDITY

LEVEL

LOW HIGH

Moisture Control

READ AND SAVE THESE SAFETY INSTRUCTIONS BEFORE USING THIS HUMIDIFIER

When using electrical appliances, basic precautions should always be followed to

reduce the risk of fire, electric shock, and injury to persons, including the following:

1. Always place this humidifier on a firm, flat and level surface. This humidifier may

not work properly on an uneven surface.

2. Place this humidifier in an area where it is not accessible to children.

3. Do not place the humidifier near any heat sources such as stoves, radiators,

and heaters.

4. Before using the humidifier, check the power cord for any signs of damage. If

the cord is found to be damaged, DO NOT USE and return the humidifier to the

manufacturer under the warranty agreement for repair.

5. This appliance has a polarized plug (one blade is wider than the other). To reduce

the risk of shock, this plug is intended to fit only one way in a polarized outlet. If

the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, con-

tact a qualified electrician. DO NOT attempt to defeat this safety feature.

6. To disconnect the humidifier, first turn controls to the OFF position, then grip the

plug and pull it from the wall outlet. Never pull by the cord.

7. A loose fit between the AC outlet (receptacle) and plug may cause overheating

and a distortion of the plug. Contact a qualified electrician to replace loose or

worn outlet.

8. The humidifier should always be unplugged and emptied when not in operation

or while being serviced or cleaned.

9. Never tilt or attempt to move the humidifier while it is operating or filled with

water. UNPLUG the humidifier before moving.

10. This humidifier requires regular cleaning. Refer to the CLEANING instructions

provided. Never clean the humidifier in any manner other than as instructed in

this manual.

11. Turn the humidifier OFF if the relative humidity exceeds 60%, or if you notice

moisture on the inside of your windows. For proper humidity reading use a

hygrometer, which is available in many hardware and department stores, or by

ordering one from Honeywell. (See CARE PRODUCTS.)

IMPORTANT SAFETY INSTRUCTIONS

Thank you for purchasing a Honeywell Natural Cool Moisture™

Humidifier. If you would like more information on our full line of

products, please visit our website at:

www.honeywell.com/yourhome.

HOW DOES IT WORK?

Dry air is pulled through the Natural Cool Moisture™system and a quiet fan blows

out invisible, moisture-balanced air. Unwanted minerals from the water are collect-

ed inside the Natural Cool Moisture™filter. When the unit is running, you will not

see or feel a “mist”. You will know your humidifier is putting moisture into the air as

you watch the water level in your tank decrease throughout the day.

WHAT IS HEALTHSHIELD

™ ANTIMICROBIAL

?

Your Honeywell Natural Cool Moisture™filter has been designed using new

HealthShield™* technology which prevents surface growth and migration of mold,

fungus, algae and bacteria in the filter for its life - approximately one season. Keep

in mind, depending on your water quality, mineral deposits can still clog or discolor

the filter, affect its life and that of the humidifier.

MODEL - HCM-3060

Your humidifier is made up of these parts:

*HealthShield™is registered with the

Environmental Protection Agency (EPA).

INTRODUCTION

Water Tank

Fill Cap

Natural Cool

Moisture™filters

Motor Housing

Water Tank

Fill Cap

Filter Frames

Base

Separate Tank Parts

•Remove the water tanks by grasping handle and pulling

up. Set aside (Fig. 1).

•Turn the Water Tank upside down so that the Fill Cap is

facing up; unscrew the Fill Cap by turning it counter-

clockwise and set aside.

•Lift off Motor Housing, set aside.

•Remove the Natural Cool Moisture™filters with frames

from the base before filling the unit with water.

•Completely wet the Natural Cool Moisture™filters with

individual frame assemblies (Fig. 2) in a sink full of cool

water to help reduce mineral build-up. Replace all wet

filters with frame assemblies back into the humidifier

base. DO NOT SQUEEZE OR WRING OUT THE NATURAL

COOL MOISTURE™FILTER. To help extend the life of

your filters repeat this step each time you fill your

humidifier.

•

Fill each Water Tank with COOL tap water (Fig. 3). Distilled

water is not necessary as the water is filtered by the

Natural Cool Moisture™filters.

DO NOT USE HOT WATER.

Doing so may damage the humidifier.

•Replace the fill cap by turning it clockwise . DO

NOT OVER TIGHTEN. Turn the Water Tank right-side up.

NOTE: WHEN CARRYING THE FILLED WATER TANK

PLEASE USE THE HANDLE AND PLACE YOUR OTHER HAND UNDER THE TANK FOR

ADDITIONAL SUPPORT.

SET UP

NOTE: We recommend that the humidifier be disinfected prior to first use. Please

see CLEANING instructions.

•Select a firm, level, flat location - at least six inches (15 cm) from any wall for

proper air flow (Fig. 1). Place the humidifier on a water-resistant surface, as

water can damage furniture and some flooring.

Honeywell will not accept responsibility for property damage caused by was

FILLING

Fig.3

DH-840 w/Tanks Lifted

Fig.1

WALL

6"

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

Fig.2

Motor

Housing

spillage

•Position the Water Tanks into the humidifier and push them into place.

•Some water will flow into the base when the filled tanks are properly in place.

CAUTION: DO NOT POUR WATER INTO THE GRILLE ON TOP OF THE MOTOR

HOUSING. DOING SO MAY DAMAGE THE HUMIDIFIER OR CAUSE

PERSONAL INJURY.

FILLING CONTINUED

OPERATION

Fig. 4

POWER

CAUTION: DO NOT PLUG IN THE HUMIDIFIER WITH WET HANDS AS AN

ELECTRICAL SHOCK COULD OCCUR.

•With the Power knob in the OFF position, plug the filled humidifier into a polarized

120V outlet. DO NOT FORCE THE POLARIZED PLUG INTO THE OUTLET; it will only

fit one way.

HUMIDITY CONTROL

1. Set the dial to the desired position. (Fig. 4).

HIGH: For fast humidifying

NORMAL: For everyday moisture control

LOW: For quieter nighttime operation

2. Set the Moisture Control knob on HIGH, by turning the dial clockwise to the

largest raindrop ( ). (Fig. 4).

Moisture Control

HUMIDISTAT (MOISTURE CONTROL KNOB)

The Moisture Control Knob allows you to adjust and select the humidity level to your

personal preference. Your humidifier will turn on and off throughout the day and

night to maintain the desired humidity level you have selected.

SETTING THE MOISTURE CONTROL KNOB/HUMIDISTAT

First run the humidifier per the operation instruction with the Moisture Control knob

set at HIGH (Fig. 4).

•Let the humidifier run on high for at least one hour or until your room has reached

a comfortable humidity level.

•At this point, slowly turn your Moisture Control knob counter-clockwise until

the humidifier shuts off and the Desired Humidity light comes on (Fig. 5).

•Now that your Humidistat is set, the humidifier will automatically turn back on

when your room drops below your comfort setting and will

automatically turn off again when the setting is reached.

Turn the humidifier OFF if the humidity level feels too moist or you notice condensa-

tion forming on the walls and/or windows.

FEATURES

Fig.5

NOTE: If the humidifier fan will not start or restart when you select a fan speed, the

Moisture Control may be set too low. Turn the dial clockwise to the largest

raindrop ( ) before High. The Desired Humidity Light will be Off when the unit is

producing moisture (Fig. 4).

Moisture Control

WEEKLY CLEANING

STEP ONE:

SCALE REMOVAL

BASE

1. Fill the Base with either:

•1 cup (8 ozs.) of undiluted white

vinegar or

•Use DuraRinse™Humidifier

Cleaner, part no. AC816, following

the instructions on the bottle.

2. Let solution stand for 20 minutes.

3. With the vinegar or DuraRinse™in

the Base clean all interior surfaces

with a soft cloth or brush to help

remove scales.

4. Rinse the Base thoroughly with

water to remove scale and cleaning

solution.

STEP TWO:

DISINFECTING

WATER TANK/BASE

1. Fill the Water Tank with:

•1 teaspoon of household bleach

and

•1 gallon of water

Pour some of this solution into the

Base.

2. Let solution stand for 20 minutes.

3. Rinse with water until the odor of

bleach is gone.

We recommend cleaning the humidifier once a week, more often if you have hard

water, notice a build-up of impurities or detect unpleasant odors.

Cleaning involves two steps SCALE REMOVAL and DISINFECTING. Be sure to

perform these in the proper order to avoid harmful chemical interactions.

•First, turn off and unplug the humidifier.

•Remove the Water Tanks, and Motor Housing.

•Remove the Natural Cool Moisture™filters from the

Base (Fig. 6).

•Discard any remaining water from the Base.

NOTE: REMOVE FILTERS BEFORE CLEANING.

Failure to remove filters during cleaning will destroy the filters.

NOTE: THE USE OF OTHER WATER TREATMENT PRODUCTS AND CHEMICALS MAY

CAUSE DETERIORATION OF THE FILTERS OR DAMAGE THE HUMIDIFIER, THEREBY

HINDERING THE HUMIDIFIER’S EFFECTIVENESS.

Fig.6

Filters

Base

PROLONGING THE LIFE OF THE FILTERS AND

MAINTAINING A CLEAN HUMIDIFIER

NOTE: DO NOT ATTEMPT TO CLEAN THE NATURAL COOL MOISTURE™FILTERS

WITH ANY CHEMICAL SOLUTIONS, DOING SO WILL DAMAGE THE FILTERS.

•HealthShield™prevents the surface growth and migration of mold, fungus, algae,

and bacteria. It is normal for a filter to discolor from mineral build-up. This will

vary depending on water quality.

•If a Natural Cool Moisture™filter appears to be clogged by hard water or mineral

deposits, soak it in a sink full of cool water for 10 minutes. DO NOT SQUEEZE OR

WRING OUT THE NATURAL COOL MOISTURE™FILTER. Always place filters back

in the humidifier wet.

•To prevent mineral deposits use DuraFree™Humidifier Water Softener, part no.

AC817, each time the Water Tank is refilled.

•Treat the Natural Cool Moisture™filters with care. DO NOT squeeze or wring out.

DO NOT clean the filter using any chemical solution.

•Always purchase Honeywell Brand Natural Cool Moisture™filters as the fan

motor of this humidifier and the Natural Cool Moisture™filter are designed to

function efficiently as a set. Using any other filter could damage the motor or

reduce the humidifier’s performance.

•Be sure to empty water from the Water Tank and Base when not in use.

END-OF-THE-SEASON CARE AND STORAGE

•Follow WEEKLY CLEANING instructions when the humidifier will not be used for at

least one week or more, or at the end of the season.

•At the end of the season, remove and throw away the filters, however SAVE the

Filter Frames. Do not store with used filters.

•Dry the humidifier completely before storing. DO NOT store with water inside the

Base or Water Tank.

•Pack the unit in its original carton and store in a cool, dry location.

•Before next use, remember to install new filters and clean the humidifier.

TROUBLE SHOOTING

Q: I hear the fan turning, but I don’t see any mist. Is my humidifier operating

properly?

A: Dry air is pulled through the Natural Cool Moisture™system and a fan disperses

invisible, moisture balanced air. There is no “mist”emitted. When operating nor-

mally you will feel only cool air coming from the unit. Monitor the water level in

your tank/base. If you notice a decrease in the Water Tank over 24 hours then

the unit is operating normally.

Q: My unit has been running for several hours. I hear the fan spinning, but I do not

notice the water level in the tank decreasing.

A: First, check the Natural Cool Moisture™filters to be sure they’re wet. If a pad

appears dry, remove it from the base and gently rinse under cool water.

Reposition wet filter in the base. You may also want to note the current moisture

level in your home. If the humidity level is over 60% the unit will not put out

much moisture as your air is already saturated.

Q: The humidifier is not running (the fan is not even spinning), but all (or some) of

the lights are on.

A: If the Desired Humidity light is ON: The Moisture Control knob may be set too

low. Moving the Moisture Control knob to the HIGH setting should restart the

unit.

Q: The humidistat was set according to the manual, but the humidifier never

seems to turn back on. Is something wrong?

A: The humidistat may be set too low. Moving the humidistat knob to the highest

setting should restart the unit. Reset the humidistat following the instructions

under FEATURES.

Q: The humidistat was set according to the manual, but the humidifier never

seems to turn off. Is something wrong?

A: The humidistat may be set too high. Reset the Moisture Control knob following

the instructions under FEATURES.

Q: My Natural Cool Moisture filter is Discoloring. Do I need a new one?

A: Probably not. Since your Natural Cool Moisture™filters have been made with

HealthShield™technology, the change indicates only a mineral deposit. Soak fil-

ters in a sink full of cool water for 10 minutes and place back in humidifier wet.

Some discoloration may remain but should not affect the humidifier’s performance.

Q: Water only seems to be draining from one tank, is this normal?

A: Yes, water may drain from one tank completely or partially before the second

tank starts to drain. This is normal and does not reduce the ability of the humidi-

fier to put out moisture.

If your local retailer is out of stock, Honeywell replacement parts and care products may

be ordered directly. You can call 1-800-332-1110 to order with a MasterCard, Visa,

Discover or fill out the form below and mail it along with a check or money order (sorry

no COD’s accepted) to:

Honeywell

Consumer Service Center

250 Turnpike Road

Southborough, MA 01772

Please allow four to six weeks for delivery.

Massachusetts residents please add 5% Sales Tax.

CARE PRODUCTS

PRICE

0 30 50 100

DRY COMFORT DAMP

%

Item Item No. Qty. U.S. CAN Total

Natural Cool Moisture™Filter, set of three HAC801 $ 14.99 $22.00

Filter Frames, set of three HAC801-1 5.00 7.25

DuraFree®Humidifier Water Softener (32 oz.) AC817 5.00 7.25

DuraRinse®Humidifier Cleaner (32 oz.) AC816 5.00 7.25

Fill Cap HCM3060-1 5.00 7.25

Water Tank and Fill Cap (Right) HCM3060-2R 25.00 35.00

Water Tank and Fill Cap (Left) HCM3060-2L 25.00 35.00

HAC-555 19.99 29.00

SUBTOTAL

MA Residents add 5% Sales Tax / CAN Residents only add 7% GST

Shipping and Handling (US res. add $4.95 / CAN res. add $7.25)

TOTAL ENCLOSED

Name Check or Money Order Enclosed

Address Credit Card No.

Exp. Date

Day Time Phone Signature

Digital Hygrometer and

Thermometer (F°/C°)

Measure room temperature and humidity

level. Free standing; can be used any-

where in the room.

Honeywell HCM-3060 Series Manuale utente

Manuali Umidificatore popolari di altre marche