Honeywell 5601 Manuale utente
Read this manual carefully and never store inside the safe!
User Guide
Steel Security Safe
Package Includes
Please carefully check the above list to confirm all items have been received. If any items
are missing, please contact Consumer Assistance. (see page 6 for contact information).
1 - Steel Security Safe
1 - Operation Manual
2 - Override Access Keys
1 Steel Security Safe 1 Operation
Manual
2 - Override
Access Keys
ENGLISH
Models 5601, 5610,
815601, 815610
1234
1234
WELCOME / PACKAGE CONTENTS ...............................................PAGE 1
OVERRIDE ACCESS KEY / INSTALL BATTERIES........................PAGE 2
TESTING DIGITAL LOCK / PROGRAMMING NEW USER CODE...PAGE 3
TESTING NEW USER CODE / SECURE LOCKOUT.....................PAGE 4
PERIOD / LOST OR FORGOTTEN USER CODES........................PAGE 4
CARE AND MAINTENANCE................................................................PAGE 4
ANCHORING YOUR SAFE....................................................................PAGE 5
CONSUMER ASSISTANCE...................................................................PAGE 6
ORDERING ADDITIONAL OVERRIDE ACCESS KEYS................PAGE 7
SAFE IDENTIFICATION RECORD / DIGITAL USER CODE.......PAGE 7
RECORD.....................................................................................................PAGE 7
NOTES........................................................................................................PAGE 8
WARRANTY INFORMATION................................................................PAGE 9
For Your Protection
• Do not remove the Serial Number tag from the safe.
• Never Store Override Access Keys inside safe.
• Record all Safe Identification Numbers on Safe Identification Record (page 7).
• Save this manual and NEVER keep it inside the safe.
INDEX
The following list outlines the items and quantities of each included with your new
safe. Please carefully check the list to confirm all items have been received. If
any item is missing, please contact Consumer Assistance (See page 6 for contact
information).
Operation Manual (1 ea.)
Override Access Keys (2 ea.)
Mounting Hardware (1 set)
Your Honeywell Steel Security Safe will provide years of safe and secure protection
for your valuables, important documents and other personal items. All Honeywell
safes are designed and built using the highest manufacturing standards to ensure
maximum user satisfaction under a variety of conditions. With proper care, your
Honeywell safe will provide “Peace of Mind” for many years to come.
Thank you and enjoy!
Attention: DO NOT RETURN SAFE TO STORE
If you are missing parts or have difficulty operating your safe, please contact our
Consumer Assistance Department by telephone. Store will not accept returned
products without prior authorization. You must first contact our consumer
assistance department. (See page 6 for contact information)
WELCOME
PACKAGE CONTENTS
1
The batteries must be installed before using your safe. The battery compartment is located inside
the safe on the lock cover panel.
Note:
If both green and red LED’s are on, it is an indicator that the batteries are weak and must be
changed immediately. The User Code will not be erased if power is restored by replacing the
batteries within 30 minutes. After 30 minutes, the User Code will be erased and will need to be
reprogrammed. Weak or dead batteries should be replaced immediately and all 4 batteries should
be changed. To replace the batteries please follow STEPS 1 - 3. Remember to always remove
batteries from safe if not using for an extended period of time. If your batteries are completely dead
and you cannot open the safe by using the digital keypad, use the override access key to open safe
and access the battery compartment. The use of Non-alkaline or rechargeable batteries is NOT
RECOMMENDED.
1. Remove battery compartment cover and insert 4 “AA” batteries. Make sure that the
batteries are installed in the correct direction with regard to polarity (+ and -).
(Figure 1 & Figure 2).
2. Replace the battery cover (Figure 3).
3. Proceed to the “Testing Digital Lock” section on next page.
INSTALL BATTERIES
OVERRIDE ACCESS KEY
Your safe is equipped with an override access key which allows immediate access
in case you forget your user codes or the batteries need to be installed or replaced.
1. Remove override key cover with small screwdriver (Figure 1).
2. Insert the override access key into the lock until it stops (Figure 2).
3. With the key inserted turn counter clockwise to the left (Figure 3).
4. Turn knob clockwise to the right and pull safe door open (Figure 4).
5. Remove override access key and store it in a safe place away from the
safe. Replace the cover over the key lock and proceed to “Install Batteries”.
Figure 1
Figure 1
Figure 2
Figure 2
Figure 3
Figure 3
Figure 4
2
1. Push the safe door to the closed position and turn the knob counter clockwise to the left (Figure 1).
2. Enter the preset primary factory code “1 5 9” followed by “#” key into the keypad. If the correct code
is entered, the green LED will light up (Figure 2).
3. The knob can then be turned clockwise to the right to open (Figure 3).
NOTE: You have approximately 5 seconds to open the safe. If you wait any longer, the safe will
re-lock and you must re-enter the code to open the safe.
4. To lock, close safe door and turn knob counter clockwise to the left (Figure 4).
PROGRAMMING NEW USER CODE
TESTING DIGITAL LOCK
Figure 1
Figure 1
Figure 2
Figure 2
Figure 3
Figure 3
Figure 4
Green LED
Green LED Yellow LED
Beep
1. Open door using the factory preset code of 159 followed by the “#” key (Figure 1).
2. Access the red reset button located on the inside of the door near the battery compartment.
Press the red reset button and the yellow LED will light up (Figure 2).
3. Enter a new 38 digit Primary user code followed by the “#” key. Press “*” to clear entry if wrong
digit is entered (Figure 3).
4. Safe will beep and yellow light will turn off (Figure 4).
5. You can now close and lock the safe door and your new User Code is now active.
NOTE: The factory pre-set code will not work after a new pass code is programmed.
Figure 4
3
SECURE LOCKOUT PERIOD
If a wrong code is entered three times in a row, the digital keypad will begin a five-minute secure lockout
period. During this secure lockout period the keypad will become disabled. Once the lockout period has
expired, the safe can be unlocked using the correct passcode. You may use the override key to open safe,
but keypad will complete the full lockout period.
LOST OR FORGOTTEN USER CODES
If the user code is lost or forgotten, you may open the safe using the Override Access key and use the
red reset button to reprogram the 38 digit user code. The instructions for opening the safe with the
override access key are located on page 2.
CARE AND MAINTENANCE
When properly maintained, your safe will continue to operate for many years. In order to ensure optimum
performance of your safe, please follow these simple precautions:
CLEAN HANDS - Never attempt to operate the digital keypad if your hands have excessive dirt, debris or
liquids on them.
CLEAN SAFE – To clean the surface of your safe, it is recommended that you use a mild cleaner (e.g.,
window cleaner) to avoid scratching or discoloring the surface. Always wipe dry and NEVER use abrasive
cleansers on the safe or digital keypad.
For future reference, store this Operation and Installation Guide in a secure area away from the safe.
DO NOT DISCARD!
TESTING NEW USER CODE
1. Push the safe door to the closed position and turn the knob counter clockwise to the left (Figure 1).
2. Enter the new User Code followed by “#” key into the keypad. If the correct code is entered, the
green LED will light up (Figure 2).
3. The knob can then be turned clockwise to the right to open (Figure 3).
NOTE: You have approximately 5 seconds to open the safe. If you wait any longer, the safe will
re-lock and you must re-enter the code to open the safe.
4. To lock, close safe door and turn knob counter clockwise to the left (Figure 4).
Figure 1 Figure 2 Figure 3 Figure 4
Green LED
4
ANCHORING YOUR SAFE
Figure 1 Figure 2 Figure 3
You may bolt your safe to the wall or floor for added theft protection and resistance to tipping. Your
safe has pre-drilled bolt-down holes in the back panel and in the floor.
To secure your safe to the wall and/or floor:
1. Select a suitable and convenient location for your safe.
2. Empty the safe and remove the carpet.
3. Locate the predrilled holes on the inside of safe.
4. Place your safe in the desired location.
5. Line up the predrilled holes and mark the floor or wall through the holes (Figure 1).
NOTE: It is not recommended to attempt to bolt to both floor and wall.
6. Move the safe aside to clear marked spots for drilling.
7. Drill holes appropriate for hardware being used and the mounting surface (Figure 2).
INCLUDED: (2 each – bolts, washers and masonry anchors).
8. Place the safe back over the holes and install the fasteners as required (Figure 3).
9. Once completed, replace the carpet.
NOTE: Bolting/unbolting of the unit is at the consumer’s expense and discretion. LH Licensed
Products is not responsible for any costs incurred if the unit is to be replaced.
If you have any questions about mounting the safe, please check with your local home center/
hardware retailer or independent contractor.
5
EMAIL: LHLPCustomerSer[email protected]
WEBSITE:www.honeywellsafes.com
ADDRESS: Consumer Assistance Dept.
LH Licensed Products, Inc., 860 East Sandhill Avenue Carson, CA 90746 USA
TELEPHONE: US/Canada 18773545457 (Toll Free)
Mexico 018002882872 After English voice recording stops you must then enter
8008601677 to complete your call. (Toll Free)
Australia 001180053257000 (Toll Free)
Germany/New Zealand 0080053257000 (Toll Free)
Other Countries XX*3103235722 (Toll Charges Apply)
XX*- Dial U.S. Country Code first
CALL CENTER HOURS: US/Canada 7am – 5pm (Pacific**) Mon – Fri (Subject to change)
CALL BACK HOURS: Other Countries 7am – 8pm (Pacific**) Mon – Fri (Subject to change)
Pacific**- Local time in Los Angeles, CA, USA
* Insert correct Country Code
** Local Time based on Los Angeles California USA
INTERNATIONAL CALL BACK HOURS:
If you need to speak with a consumer assistant and cannot contact us during the Call
Center hours above, please send an email or leave a telephone message, including your Name,
Telephone Number and the best time for us to contact you during the Call Back hours above and
we will make every effort to contact you and help answer any of your questions or concerns.
CONSUMER ASSISTANCE
6
The following information is required to order keys:
1. PROOF OF OWNERSHIP (1 of 2 Options Below)
A) SALES RECEIPT & IDENTIFICATION – INTERNATIONAL ORDERS ONLY!
• Copy of sales receipt showing Store, Date & Product Description.
• Copy of your picture I.D. (Drivers license, passport, regular I.D.).
B) PRODUCT OWNERSHIP VERIFICATION FORM
If sales receipt is not available, contact us by email or telephone to request a “Product
Ownership Verification Form”.
2. ORDER INFORMATION
CONTACT
• Name & Shipping Address
• E-mail address (If Available)
• Telephone Number
• Best Time to Contact You
3. PLACING AN ORDER
• To begin the order process, contact us by telephone, email, or mail
4. METHOD OF PAYMENT
• Visa, MasterCard, Check or Money Order
NOTE: For pricing please contact Consumer Assistance. Contact information is located on the back
cover of this manual. Payment method and pricing subject to change.
Model Number:
Serial Number:
Override Access Key Number:
User Code:
ORDERING ADDITIONAL OVERRIDE ACCESS KEYS
SAFE IDENTIFICATION RECORD
DIGITAL USER CODE RECORD
PRODUCT
• Model #
• Serial #
• Lock Key #
• Quantity of Keys Ordered
7
NOTES
8
Questo manuale è adatto per i seguenti modelli
3
Indice
Lingue:
Altri manuali Honeywell Sicuro
Honeywell
Honeywell 5605 Manuale utente
Honeywell
Honeywell 5911 Manuale utente
Honeywell
Honeywell 5101 Manuale utente
Honeywell
Honeywell 2605 Manuale utente
Honeywell
Honeywell 5805 Manuale utente
Honeywell
Honeywell 2111 Manuale utente
Honeywell
Honeywell 5002 Manuale utente
Honeywell
Honeywell 2116 Manuale utente
Honeywell
Honeywell 3035D Come usare
Honeywell
Honeywell 2054D - 1 Hour Steel Fire Safe Come usare
Honeywell
Honeywell 5101 Manuale utente
Honeywell
Honeywell 5101 Manuale utente
Honeywell
Honeywell 2911 Manuale utente
Honeywell
Honeywell 5912 Come usare
Honeywell
Honeywell 2901 Manuale utente
Honeywell
Honeywell 1553 Manuale utente
Honeywell
Honeywell 1101 Manuale utente
Honeywell
Honeywell 2512 Manuale utente
Honeywell
Honeywell 2111 Manuale utente
Honeywell
Honeywell 2101 Manuale utente
Manuali Sicuro popolari di altre marche
Hornady
Hornady SnapSafe Trunk Safe II Manuale utente
SPORTS AFIELD
SPORTS AFIELD SA-HD5-BIO Manuale utente
Phoenix
Phoenix FS1280F Manuale utente
Phoenix
Phoenix SS0992K Scheda informativa del prodotto
Technomax
Technomax Trony Series Manuale
SPORTS AFIELD
SPORTS AFIELD INSTINCT BIOMETRIC Series Manuale utente
