Honeywell Wireless Alarm Bar Manuale utente
Wireless Alarm Bar Installation Guide
1
Wireless Alarm BarTM
Rev. B
August 2018
P/N: F08-4007-000
Installation Guide
Wireless Alarm Bar Installation Guide
2
© 2018 Honeywell International.
Product Registration
Register your product online by visiting:
http://www.raesystems.com/support/product-registration
By registering your product, you can:
•Receive notification of product upgrades or enhancements
•Be alerted to Training classes in your area
•Take advantage of RAE Systems special offers and promotions
Wireless Alarm Bar Installation Guide
3
Contents
1. General Information.............................................................................................................6
2. Purpose Of This Guide........................................................................................................6
3. Flexible Configurations........................................................................................................7
3.1. Wireless Alarm Bar Mounting.......................................................................................8
3.1.1. Mounting The Wireless Alarm Bar ..........................................................................8
3.1.2. Optional Pole Mounting ..........................................................................................9
3.2. Wireless Alarm Bar Wiring..........................................................................................10
3.2.1. Complete Wireless Alarm Bar Wiring Diagram .....................................................10
3.2.2. Opening The Junction Box ...................................................................................12
3.2.3. Connecting AC Power (Mains) Wiring...................................................................13
3.2.4. Reassembly..........................................................................................................14
3.2.5. External Grounding...............................................................................................14
4. Powering And Programming..............................................................................................15
5. AC-Powered Wireless Alarm Bar Specifications................................................................15
6. DC-Powered Wireless Alarm Bar Specifications................................................................16
Wireless Alarm Bar Installation Guide
4
IMPORTANT!
Read Before Installing
This Installation Guide is for wiring and installation of the Wireless Alarm Bar only. It must be used in
conjunction with the RAEPoint User’s Guide for safe configuration and operation. The RAEPoint User’s Guide is
available at www.raesystems.com.
WARNINGS
This Manual must be carefully read by all individuals who have or will have the responsibility of using, maintaining,
or servicing this product. The product will perform as designed only if it is used, maintained, and serviced in
accordance with the manufacturer’s instructions. The user should understand how to set the correct parameters and
interpret the obtained results.
For safety reasons, this equipment must be operated and serviced by qualified personnel only. Read and
understand the instruction manual completely before operating or servicing.
AVERTISSEMENT
Pour des raisons de sécurité, cet équipment doit être utilisé, entretenu et réparé uniquement par un personnel
qualifié. Étudier le manuel d’instructions en entier avant d’utiliser, d’entretenir ou de réparer l’équipement.
Read Before Operating
This manual must be carefully read by all individuals who have or will have the responsibility of using, maintaining,
or servicing this product. The product will perform as designed only if it is used, maintained, and serviced in
accordance with the manufacturer’s instructions. The user should understand how to set the correct parameters and
interpret the obtained results.
CAUTION!
To reduce the risk of electric shock, turn the power off before opening this instrument or performing service. Never
operate the instrument when the instrument is open. Service this product only in an area known to be non-
hazardous.
Proper Product Disposal At End Of Life
EU Directive 2012/19/EU: Waste Electrical and Electronic Equipment (WEEE)
This symbol indicates that the product must not be disposed of as general industrial or domestic
waste. This product should be disposed of through suitable WEEE disposal facilities. For more
information about disposal of this product, contact your local authority, distributor, or the
manufacturer.
Wireless Alarm Bar Installation Guide
5
Caution
This device complies with Part 15 of the FCC Rules / Industry Canada license-exempt RSS standard(s). Operation
is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditionssuivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur del'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage estsusceptible d'en
compromettre le fonctionnement.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio frequency energyand, if not installed
and used in accordance with the instructions, maycause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference byone or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technicianfor help.
Under Industry Canada regulations, this radio transmittermay only operate using an antenna of a type and
maximum (or lesser) gain approved for the transmitter byIndustry Canada. To reduce potential radio interference to
other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power
(e.i.r.p.) is not more than that necessary for successful communication.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peutfonctionner avec une
antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but
de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type
d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité
nécessaire à l'établissement d'une communication satisfaisante.
Wireless Alarm Bar Installation Guide
6
1. General Information
As part of a wireless mesh network, the Wireless Alarm Bar communicates with wireless detectors
and controllers and can direct any of its five internal relays to trigger audible and visible alarms.
Remote alarm notifications are critical for many applications where local device alarms are simply
not visible enough or loud enough to alert a wide area. RAEPoint relay settings can be fully
configured wirelessly via the system controller. The Wireless Alarm Bar is suitable for use in
Class I, Division 2, Groups C & D hazardous locations (USA only).
Key Features
•Mounted and pre-wired with two 10J xenon lights and a 112dB horn.
•Five internal SPDT relays
•Wireless transmission distance of 1000 ft (300m) line-of-sight. Range can be extended by using
wireless routers.
•Suitable for use in Class I, Division 2, Groups C & D hazardous locations (USA only)
•LEDs indicate status
Applications
•Oil and gas exploration
•Refineries and petrochemical plants
•Fenceline monitoring
2. Purpose Of This Guide
This guide is designed to provide information on installing and wiring the Wireless Alarm Bar. Refer
to the RAEPoint User’s Guide for testing and operation information (all functions of the RAEPoint
Wireless Alarm Bar are controlled through the RAEPoint that is integrated with the horn and strobe
lights).
Wireless Alarm Bar Installation Guide
7
3. Flexible Configurations
The Wireless Alarm Bar can be configured for large or small systems, and the network can be
expanded or units removed, depending on the facility or facilities being monitored.
Simple configuration that uses MeshGuard sensors and a Wireless Alarm Bar host:
Full network, including externally controlled devices:
Wireless Alarm Bar Installation Guide
8
3.1. Wireless Alarm Bar Mounting
Make sure that there is approximately 12" (30 cm) of clearance on all sides of the Wireless Alarm
Bar so that the horn’s sound is not attenuated and to ensure clear view of the two visible alarm
lights.
3.1.1. Mounting The Wireless Alarm Bar
When mounting the RAEPoint on a wall, use heavy-duty steel screws located as indicated below.
Follow these steps:
1. Locate the Wireless Alarm Bar on a wall or other flat surface. Make sure there is at least 12”
(30 cm) of clearance around the unit. Mark the mounting holes’ locations.
2. Remove the Wireless Alarm Bar.
3. Drill pilot holes in the wall or mounting surface.
4. Hold the Wireless Alarm Bar firmly against the wall or mounting surface and insert and tighten
the screws.
The Wireless Alarm Bar is now ready for electrical wiring and testing.
456.0 mm/18″
476.0 mm/18.75″
Wireless Alarm Bar Installation Guide
9
3.1.2. Optional Pole Mounting
If it is not mounted on a wall or other flat surface, the Wireless Alarm Bar can be attached to a pole
using optional brackets (Part Number 019-2052-000).
Note: The pole must be between 1” (25mm) and 2.5” (63mm) in diameter.
Slip the screws through the two holes that are side by side in order to mount the Wireless Alarm
Bar’s plate to a vertical pole.
Loosely assemble the clamp parts around the pole. Note that the screws have nuts that fit into the
clamp parts. The clamp parts are designed to hold the nut so that you do not need to use a wrench
on this side. Hand-tighten the parts until snug.
Use a hex wrench to tighten the hex screws from the front of the enclosure:
Once the clamp parts and the enclosure are securely held against the pole, stop tightening.
Wireless Alarm Bar Installation Guide
10
3.2. Wireless Alarm Bar Wiring
The Wireless Alarm Bar already has most wiring done at the factory. It is only necessary to connect
the power supply wires and grounding (according to local requirements). Power and internal
grounding wires must be fed through a connector at the bottom of the unit.
IMPORTANT!
Prior to factory shipment, the RAEPoint is tested. However, the instrument should be tested after
installation.
3.2.1. Complete Wireless Alarm Bar Wiring Diagram
The schematic diagram below shows internal wiring of the Wireless Alarm Bar. Refer to the
diagram on page 13 for power connections.
Note: Thermistors are pre-installed in the Junction Box to protect the relays.
Wires must be fed in
through a 1/2" NPT insert
(UL-certified). Conduit
seals are required within
18″ (45 cm) of conduit
entrances for Group C
hazardous locations.
Indice
Altri manuali Honeywell Sistema di sicurezza
Honeywell
Honeywell Ademco VISTA-50P Istruzioni per il montaggio
Honeywell
Honeywell LYNX Touch Security System Manuale utente
Honeywell
Honeywell Vista 21IP Manuale utente
Honeywell
Honeywell CommerCialPro 7000 Manuale operativo
Honeywell
Honeywell Accenta Series Guida rapida
Honeywell
Honeywell FBII OMNI 624 Istruzioni per il montaggio
Honeywell
Honeywell Gamewell-FCI MS-95 Manuale utente
Honeywell
Honeywell Lyric SIXSIREN Manuale utente
Honeywell
Honeywell VISTA-20PSeries Manuale utente
Honeywell
Honeywell X-618 Manuale utente
Honeywell
Honeywell Lynx Plus Series Manuale utente
Honeywell
Honeywell Friedland FGGA04 Series Manuale utente
Honeywell
Honeywell Gamewell-FCI Velociti MS-7AF Manuale utente
Honeywell
Honeywell nfs2-3030 Manuale utente
Honeywell
Honeywell ESSER TAM Manuale utente
Honeywell
Honeywell TCPA1BS Manuale utente
Honeywell
Honeywell Gamewell-FCI E3 Series Manuale utente
Honeywell
Honeywell Ademco Vista-48LA Istruzioni per il montaggio
Honeywell
Honeywell First Alert FA168CPS Manuale utente
Honeywell
Honeywell Apex Destiny 4100 Manuale utente
Manuali Sistema di sicurezza popolari di altre marche
EDM
EDM Solution 6+6 Wireless-AE Manuale utente
Highway Safety Group
Highway Safety Group EA401 Manuale utente
Siren
Siren LED GSM Manuale utente
Detection Systems
Detection Systems 7090i Istruzioni per il montaggio
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manuale utente
Siemens
Siemens FDM273 Manuale utente