Honeywell AQ1000TP2 - Programmable Hydronic Communicating... Manuale utente

OWNER’S GUIDE

Place Bar Code Here

7-day Programmable Hydronic Thermostat

AQ1000TP2

400-146-001-A_69-2245EF (AQ1000TP2) ENG.fm Page -2 Wednesday, June 18, 2008 2:32 PM

69-2245EF

Need Help?

For assistance with this product please visit http://yourhome.honeywell.com

or call Honeywell Customer Care toll-free at 1-800-468-1502.

Read and save these instructions.

® U.S. Registered Trademark. Patents pending.

IMPORTANT

This thermostat is to be used with an AQ2000 Series hydronic control panel.

400-146-001-A_69-2245EF (AQ1000TP2) ENG.fm Page -1 Wednesday, June 18, 2008 2:32 PM

69-2245EF

User’s section

About your new thermostat ........................................................................................................................ 1

Overview of display and controls................................................................................................................ 2

Powering up and setting the temperature .................................................................................................. 3

Setting the thermostat Hold/Run mode ...................................................................................................... 4

Setting the system Heat/Cool mode........................................................................................................... 5

Setting the fan On/Auto mode.................................................................................................................... 6

Setting the clock and date.......................................................................................................................... 7

Default schedule......................................................................................................................................... 9

New schedule........................................................................................................................................... 10

Modifying the schedule..............................................................................................................................11

User’s configuration menu ....................................................................................................................... 14

Alert messages......................................................................................................................................... 17

Installer’s section

Installation ................................................................................................................................................ 18

Configuration switches............................................................................................................................. 19

Installer’s configuration menu................................................................................................................... 20

Appendix

Technical specifications............................................................................................................................ 23

2-year limited warranty............................................................................................................................. 24

Table of contents

400-146-001-A_69-2245EF (AQ1000TP2) ENG.fm Page 0 Wednesday, June 18, 2008 2:32 PM

1 69-2245EF

Honeywell’s AQ1000TP2 is a programmable thermostat designed to be used with an AQ2000 Series

hydronic control panel to operate a hydronic system, a HVAC system or both. It displays both indoor and

outdoor temperatures and incorporates the following functions:

About your new thermostat

A/F/AF regulation modes: The thermostat can control the ambient air temperature (A), the floor temperature (F) or

the ambient air temperature with floor temperature limits (AF) (see page 19).

System Heat/Cool modes: The thermostat can activate a heating system or a cooling system. The thermostat can

also be placed in the off position when neither heating nor cooling is required (see

page 5).

Fan On/Auto modes: When the thermostat is used to activate a fan, the latter can be placed in Auto or On

mode (see page 6).

Programmable schedule: The thermostat can be programmed to use up to 4 periods per day. Each of the 28

periods for the week can have its own start time and temperature setpoints (see page 9).

Thermostat modes: The thermostat can be placed in any of the following modes (see page 4):

•In Hold mode, the setpoint must be set manually.

•In Run mode, the setpoint is adjusted according to the programmed schedule.

•The thermostat enters Temporary Hold mode when the setpoint is temporarily

overridden while in Run mode.

•When the Unoccupied mode is activated by the hydronic control panel, the

setpoint is set back by a predetermined temperature margin.

•When the Vacancy mode is activated by the hydronic control panel for further

energy savings during periods of extended vacancy, the setpoint will be set to a

lower value if the thermostat is in heat mode or to higher value in cool mode.

400-146-001-A_69-2245EF (AQ1000TP2) ENG.fm Page 1 Wednesday, June 18, 2008 2:32 PM

2 69-2245EF

Overview of display and controls

Indoor temperature

Time Period

Menu button

Clear button

Fan button

System button

Hold/Run button

Fan On/Auto mode

System Heat/Cool mode

Thermostat Hold/Run mode

Temperature (up)

and (down) buttons

Keypad is locked

Outdoor temperature

Heating is on Cooling is on

Day

400-146-001-A_69-2245EF (AQ1000TP2) ENG.fm Page 2 Wednesday, June 18, 2008 2:32 PM

3 69-2245EF

Powering up

The thermostat is powered through the AQ2000 hydronic control panel. It turns on when the zoning module is

energized.

At power-up, the message ALL ZONES SCHEDULE will flash for the first 15 seconds if the thermostat has been

configured for ALL-ZONES scheduling (see page 19). In this case, at first power-up, the thermostat will adopt

the schedule settings from the AQ2000 hydronic control panel*. All thermostats configured for ALL-ZONES

scheduling should have therefore the same schedule settings.

If the AQ2000 controller does not support ALL-ZONES scheduling

(manufactured prior to V2 software

build), at first power-up the thermostat will initially retain its schedule settings. However, as soon as any

modification is made to any of the thermostats configured for ALL-ZONES scheduling, all the other thermostats

will adopt the schedule of that thermostat.

Setting the Temperature manually

The thermostat displays the actual (measured) temperature of the zone.

• To display the setpoint temperature, press the or button once. The setpoint will be displayed for

the next 5 seconds. SET HEAT or SET COOL appears at the same time as the setpoint to indicate the

thermostat is maintaining the temperature at the heating setpoint or cooling setpoint respectively.

• To change the setpoint, press the or button until the desired temperature is displayed. To scroll

faster, press and hold the button.

NOTE: If the hydronic control panel has locked the thermostat’s keypad, appears on the screen. This

means the thermostat settings cannot be changed.

Powering up and setting the temperature

400-146-001-A_69-2245EF (AQ1000TP2) ENG.fm Page 3 Wednesday, June 18, 2008 2:32 PM

4 69-2245EF

Select one of the following modes of operation:

Run mode

Place the thermostat in Run mode using the HOLD/RUN button. In this mode, the

setpoint is automatically adjusted according to the schedule (see page 9).

Hold Mode

Place the thermostat in Hold mode using the HOLD/RUN button. In this mode, any

modification to the temperature setpoint must be done manually.

Temporary hold mode

If you modify the setpoint manually while the thermostat is in Run mode or Vacancy

mode, it will enter Temporary Hold mode. The Temporary Hold mode and the new

temporary setpoint will remain in effect until the end of the current period (if the

thermostat was in Run mode) or after 2 hours (if the thermostat was in Vacancy mode).

Unoccupied (Setback) Mode

The thermostat can be placed to Unoccupied mode from Hold mode only. When the

Unoccupied mode is activated by the hydronic control panel, the temperature

setpoint is lowered (in heat mode) or raised (in cool mode) by a setback margin. The

margin is set in the user’s configuration menu (see page 14). The thermostat cannot

be placed in Unoccupied mode if its setback margin is set to 0.

Vacancy Mode ()

When the Vacancy mode ()is activated by the hydronic control panel the thermostat uses the Vacancy setpoint

temperature. This value is set in the installer’s configuration menu of the thermostat (see page 20) or the User Menu

of the programmable AQ2000 control panel.

Setting the thermostat Hold/Run mode

VACANCY

400-146-001-A_69-2245EF (AQ1000TP2) ENG.fm Page 4 Wednesday, June 18, 2008 2:32 PM

5 69-2245EF

Press the SYSTEM button to place the system in one of the following modes of operation:

Cool mode

The air cooling system is on.

Heat mode

The hydronic heating system is on.

Auto mode

The system is in automatic changeover mode. This means the thermostat switches between heating

mode and cooling mode to maintain the desired temperature. Cooling starts when the temperature

rises and stays above the cooling setpoint for 15 minutes. Heating starts when the temperature drops

and stays below the heating setpoint for 15 minutes.

NOTE: In Hold mode, where you enter only one setpoint, if you set the temperature when the thermostat is in

heat mode, it becomes the heating setpoint and the cooling setpoint is equal to the heating setpoint plus 2 °F

(1 °C). If you set the temperature when the thermostat is in cool mode, it becomes the cooling setpoint and

the heating setpoint is equal to the cooling setpoint minus 2 °F (1 °C).

Off

All cooling and heating are off.

Setting the system Heat/Cool mode

SYSTEM button

System mode indicator

A thermostat can activate heating and cooling at the same time when configured in

AF mode. This happens when heating is required to bring the floor above the

minimum floor limit and, at the same time, cooling is required as the ambient air

above the setpoint temperature. This can be prevented by raising the cooling

setpoint and/or lowering the minimum floor limit.

400-146-001-A_69-2245EF (AQ1000TP2) ENG.fm Page 5 Wednesday, June 18, 2008 2:32 PM

6 69-2245EF

When the thermostat is used to operate a fan in an HVAC system, you can press the

FAN button to place the fan in one of the two following modes of operation:

On mode

The fan runs all the time.

Auto mode

The fan runs only during a call for heat or cool.

Setting the fan On/Auto mode

FAN button

Fan mode indicator

400-146-001-A_69-2245EF (AQ1000TP2) ENG.fm Page 6 Wednesday, June 18, 2008 2:32 PM

7 69-2245EF

Setting the clock and date

nPress the Menu button. oPress CLOCK.pPress the or button to

set the time (A). Press and

hold the button to scroll faster.

Press NEXT (B).

400-146-001-A_69-2245EF (AQ1000TP2) ENG.fm Page 7 Wednesday, June 18, 2008 2:32 PM

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Altri manuali Honeywell Termostato

Honeywell

Honeywell T810C Manuale utente

Honeywell

Honeywell resideo TH6320U2008 Manuale utente

Honeywell

Honeywell Tradeline T8611M Manuale utente

Honeywell

Honeywell T8601 Manuale utente

Honeywell

Honeywell RTH1100 series Manuale utente

Honeywell

Honeywell Chronotherm IV T8611G Manuale utente

Honeywell

Honeywell The Round CT87N Manuale utente

Honeywell

Honeywell PC8900A Manuale utente

Honeywell

Honeywell T8132C Manuale utente

Honeywell

Honeywell T8611G Chmnothern IV Manuale utente

Honeywell

Honeywell T7350H Guida utente

Honeywell

Honeywell FocusPRO Wi-Fi TH6000 Series Manuale utente

Honeywell

Honeywell Deluxe T4098A Manuale utente

Honeywell

Honeywell RLV430 Manuale utente

Honeywell

Honeywell TROL-A-TEMP 69-1496 Manuale utente

Honeywell

Honeywell RTH7600 Series Manuale utente

Honeywell

Honeywell Chronotherm IV T8600D Manuale utente

Honeywell

Honeywell RTHL3550 Manuale utente

Honeywell

Honeywell RTH3100C Manuale utente

Honeywell

Honeywell 1-Heat/1-Cool - TH5110D1022 Large R Manuale utente

Honeywell

Honeywell FocusPRO TH6220D Manuale utente

Honeywell

Honeywell VisionPRO Wi-Fi TH8320WF Manuale utente

Honeywell

Honeywell TB6575B1000/U - SuitePro Digital Fan Coil... Manuale utente

Honeywell

Honeywell WIFI 9000 COLOR TOUCHSCREEN Manuale utente

Manuali Termostato popolari di altre marche

EWELLY

EWELLY EW-181 Manuale utente

Prolon

Prolon T1100 Istruzioni per l'installazione

Computherm

Computherm Q20 Manuale utente

Heatmiser

Heatmiser neoStat Manuale utente

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manuale utente

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manuale utente

Saswell

Saswell SAS920XWHB-7-S-RF Guida

Aircalo

Aircalo TFP1-ET85P2 Manuale utente

Carrier

Carrier DEBONAIR 33CS Manuale utente

Lennox

Lennox iHarmony Zone Thermostat Istruzioni per il montaggio

Gemtech

Gemtech GT7000 Manuale di istruzioni

Rollei

Rollei Smartes 45000 Manuale utente

Sinope

Sinope TH1300RF Manuale utente

NuTone

NuTone NTBZ48 Istruzioni operative originali

Stelpro

Stelpro MAESTRO ASMT402AD Manuale utente

Aube Technologies

Aube Technologies TH305 Manuale utente

Powtier Controls

Powtier Controls 505MST Manuale utente

Kanmor

Kanmor Zone Control 369e Manuale utente